V brake distance from rim
#1
Newbie
Thread Starter
Join Date: May 2022
Location: USA
Posts: 10
Bikes: Trek Marlin
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 0 Times
in
0 Posts
V brake distance from rim
How far should the brake pads of my v brake be from the rim?
I just purchased some dual compound MTB Kool Stop pads and they have a squeegee on the end, how far is the squeegee supposed to be compared to the rest of the pad?
I just purchased some dual compound MTB Kool Stop pads and they have a squeegee on the end, how far is the squeegee supposed to be compared to the rest of the pad?
Last edited by zsid; 06-18-22 at 08:44 PM. Reason: added info
#2
Really Old Senior Member
You don't want the pads to rub or the lever to bottom out.
Between those endpoints, do what feels good.
Between those endpoints, do what feels good.
Likes For Bill Kapaun:
#3
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,116
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1789 Post(s)
Liked 1,629 Times
in
933 Posts
The nub on the end is to clear moisture/contaminates from the braking surface prior to full pad engagement.
The proper distance from the rim is whatever distance barely allows the brake noodle to clear the hasp mechanism for opening the brake.
Ideally the brake arms ought to be vertical & parallel to each other when the brake is in operation. Swap the convex/concave washer pair around to move the pad closer/further from the rim.
The best pad approach ought to look like you are fist bumping your self.
Good luck. You can do it.
The proper distance from the rim is whatever distance barely allows the brake noodle to clear the hasp mechanism for opening the brake.
Ideally the brake arms ought to be vertical & parallel to each other when the brake is in operation. Swap the convex/concave washer pair around to move the pad closer/further from the rim.
The best pad approach ought to look like you are fist bumping your self.
Good luck. You can do it.
__________________
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
#4
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,799
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,024 Times
in
723 Posts
An old rule of thumb, never used it, was 2 dimes under each pad, best is the one that lets you undo the noodle with modest effort/no struggle. Best is to get there by tightening the adjustment barrel 2 turns so you can loosen a touch if you hit something and the rim needs a little extra clearance for the ride home.
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
I have found the wiper ramp at the leading end of some KS pads to be more trouble to end up with both good rim clearance and a not so mushy lever feel after pad contact has happened. I have ground the ramp/wiper portion down many times for better feel. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart: