Cannondale Black 1" Headset
10-24-22, 09:24 PM
#1
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Cannondale Black 1" Headset and Rear Rack
This 1" threaded Cannondale headset belongs on somebody's Black Lightning or faux Black Lightning. Don't know who made it; Tange probably? Gold Cannondale lettering, on either side of locknut, looks great. Races are good. You can see a little line on the top fixed race and some bearing marks on the lower cup, but I don't think it was ridden much, so these are not pronounced. This was installed without a keyed washer, which I don't think is correct, but there is no keyed washer included.
Price is $40 shipped in the CONUS. PayPal, Venmo, check in the mail, local pickup in Portland for $5 less, whatever works. Thanks for looking.
I also have this Cannondale rear rack for sale. I found it at a garage sale and had to bend it back into shape. It seems to have survived. Here's a thread documenting the process: https://www.bikeforums.net/classic-v...rear-rack.html
I never got around to using it, so I figured I'd see if anyone is interested. Shipping is around $25 for something this large, so how about $40 shipped in the CONUS.
Price is $40 shipped in the CONUS. PayPal, Venmo, check in the mail, local pickup in Portland for $5 less, whatever works. Thanks for looking.
I also have this Cannondale rear rack for sale. I found it at a garage sale and had to bend it back into shape. It seems to have survived. Here's a thread documenting the process: https://www.bikeforums.net/classic-v...rear-rack.html
I never got around to using it, so I figured I'd see if anyone is interested. Shipping is around $25 for something this large, so how about $40 shipped in the CONUS.
Last edited by JacobLee; 11-25-22 at 03:55 PM. Reason: adding item
10-27-22, 02:07 AM
#2
Full Member
That looks so pretty. If I hadn't just gotten a VO 1" headset for my black ST I'd be seriously tempted!
10-27-22, 07:06 PM
#3
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Thanks!
__________________
10-27-22, 08:15 PM
#4
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,180 Times
in
1,183 Posts
Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
11-25-22, 04:00 PM
#6
Total Scrounge
Thread Starter
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Bumping this because I added a black Cannondale rear rack. It's Black Friday, after all.
Also, I found a black keyed headset spacer from a trashed XT headset that I can throw in with the headset. Some of the anodizing is worn off, but nothing a sharpie can't fix. It's a little over 3mm thick. Stack height without the washer is 33.6 mm, so with the washer, more like 37mm.
Also, I found a black keyed headset spacer from a trashed XT headset that I can throw in with the headset. Some of the anodizing is worn off, but nothing a sharpie can't fix. It's a little over 3mm thick. Stack height without the washer is 33.6 mm, so with the washer, more like 37mm.
__________________
