Inner tube size
#1
Newbie
Thread Starter
Join Date: Mar 2021
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Inner tube size
HI All
My new trek domane SL5 has 700Cx32 21mm Presta valve inner tube, it is flat now and I want to replace but not finding anything in amazon of similar size (21mm), is there a suggestion on what alternate tube I could use? This is the first time I am changing innertubes so is little confused.
Thanks.
My new trek domane SL5 has 700Cx32 21mm Presta valve inner tube, it is flat now and I want to replace but not finding anything in amazon of similar size (21mm), is there a suggestion on what alternate tube I could use? This is the first time I am changing innertubes so is little confused.
Thanks.
#2
Heft On Wheels
Join Date: Nov 2014
Location: South Dakota
Posts: 3,123
Bikes: Specialized,Cannondale,Argon 18
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 560 Times
in
346 Posts
Are you wondering about the presta valve size or tube size?
any tube 700X28 or 700X32 range will work fine with no issues. The presta valve size doesn't matter at all as long as it long enough to go through the rim to add are. So you can probably get always with anything from 20mm-anysize.
any tube 700X28 or 700X32 range will work fine with no issues. The presta valve size doesn't matter at all as long as it long enough to go through the rim to add are. So you can probably get always with anything from 20mm-anysize.
#4
Really Old Senior Member
Get a patch kit-
https://www.amazon.com/Rema-Standard...84978276&psc=1
https://www.amazon.com/Rema-Standard...84978276&psc=1
Likes For Bill Kapaun:
#5
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
HI All
My new trek domane SL5 has 700Cx32 21mm Presta valve inner tube, it is flat now and I want to replace but not finding anything in amazon of similar size (21mm), is there a suggestion on what alternate tube I could use? This is the first time I am changing innertubes so is little confused.
Thanks.
My new trek domane SL5 has 700Cx32 21mm Presta valve inner tube, it is flat now and I want to replace but not finding anything in amazon of similar size (21mm), is there a suggestion on what alternate tube I could use? This is the first time I am changing innertubes so is little confused.
Thanks.
Where did you get the 21mm number from?
#6
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
The shortest presta valve we stock is 48mm. 21 is stupid short, I've never in my life seen one that size.
Likes For cxwrench:
#7
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,458
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4330 Post(s)
Liked 3,955 Times
in
2,644 Posts
Go down to your local shop, they probably will have tubes. Agreed with cxwrench that is a super short valve. We have some 32s but that is about as short as I could fathom. 48 is plenty short.
Tubes will also have a range so you just need to make sure you tire size falls within that range and has the correct valve and you are OK. Your local shop can easily help with that and if you aren't feeling frisky you can have them replace it and you can go grab a nice frosty cold one or get riding faster.
Tubes will also have a range so you just need to make sure you tire size falls within that range and has the correct valve and you are OK. Your local shop can easily help with that and if you aren't feeling frisky you can have them replace it and you can go grab a nice frosty cold one or get riding faster.
Likes For veganbikes:
#8
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,945
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6173 Post(s)
Liked 4,790 Times
in
3,305 Posts
Tubes generally are made to fit a range of tire widths. Ideally, you want the tube to fit in the tire with no excess material to cause kinks and wrinkles which will just be wear to make a near future flat. And maybe a bumpy ride because air pressure isn't supporting the tire evenly.
On the other extreme, a tube that has to stretch and expand to fill the tire will tend to act like a balloon when punctured. So when flats happen, they'll be all at once instead of slow leaks that give you time to pick where you want to stop.
On the other extreme, a tube that has to stretch and expand to fill the tire will tend to act like a balloon when punctured. So when flats happen, they'll be all at once instead of slow leaks that give you time to pick where you want to stop.
#9
Senior Member
Join Date: May 2021
Posts: 219
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 111 Post(s)
Liked 69 Times
in
51 Posts
Lots of excellent advice in the posts above.
Sometimes there are 'overlapping' size ranges in tubes.
For example, Continental tubes on one website are listed in 25-32 mm and 32-42 and 32-47 sizes.
For a 32 mm tire, for example, I'd pick the smaller tube option as it seems to reduce my chances of damaging the tube when I install it
Damaging a tube while I'm installing it in the basement shop isn't a big deal, but I did that once at the roadside and it was irritating.
Sometimes there are 'overlapping' size ranges in tubes.
For example, Continental tubes on one website are listed in 25-32 mm and 32-42 and 32-47 sizes.
For a 32 mm tire, for example, I'd pick the smaller tube option as it seems to reduce my chances of damaging the tube when I install it
Damaging a tube while I'm installing it in the basement shop isn't a big deal, but I did that once at the roadside and it was irritating.
#10
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,955
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 879 Times
in
526 Posts
The 21 mm is the width of the rim. This number has little to do with the size of the inner tube. You'll want to choose a tube size appropriate to your tire size, i.e. in your case, 32 mm. The advice above to get a patch kit is excellent. Patching is reliable and quick; much quicker than trying to find a new tube.
From the Trek website:
Rim: Bontrager Affinity Disc, Tubeless Ready, 24-hole, 21mm width, presta valve
Tire: Bontrager R1 Hard-Case Lite, wire bead, 60 tpi, 700x32c
Max tire size 38c
From the Trek website:
Rim: Bontrager Affinity Disc, Tubeless Ready, 24-hole, 21mm width, presta valve
Tire: Bontrager R1 Hard-Case Lite, wire bead, 60 tpi, 700x32c
Max tire size 38c
Likes For Moe Zhoost: