bar width?
#1
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
bar width?
So it seems the current trend is narrow bars. I assume because narrow bars can find holes easier and are more aero are the reasons behind this. However what about leverage when using your upper body to throw your bike back and forth? I have pretty decent upper body strength and throw my bike a lot when sprinting out of the saddle. While this likely applies more to the road than track, is there much leverage lost/gained by losing 3 to 5 CM of bar width? Plus I like to keep wide elbows to encourage people to come around me high. I have rode 40MM bars on the road and track forever, but I am thinking of going down to the 35 scatto this year for the gains in aero and position.
Just curious if anyone has switched and felt they lost something because of it.
Jamie
Just curious if anyone has switched and felt they lost something because of it.
Jamie
#2
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
So it seems the current trend is narrow bars. I assume because narrow bars can find holes easier and are more aero are the reasons behind this. However what about leverage when using your upper body to throw your bike back and forth? I have pretty decent upper body strength and throw my bike a lot when sprinting out of the saddle. While this likely applies more to the road than track, is there much leverage lost/gained by losing 3 to 5 CM of bar width? Plus I like to keep wide elbows to encourage people to come around me high. I have rode 40MM bars on the road and track forever, but I am thinking of going down to the 35 scatto this year for the gains in aero and position.
Just curious if anyone has switched and felt they lost something because of it.
Jamie
Just curious if anyone has switched and felt they lost something because of it.
Jamie
#3
Senior Member
Join Date: Mar 2007
Posts: 6,401
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
I was a disciple of Rory O'Reilly, a long time ago. One of the tenets was huge gears. I raced, for a while, in a 114 inch gear. And I once beat a very competent racer to the line while standing up and throwing my bike back and forth like a road sprinter. The fellow who I beat made a comment to the effect that he'd never seen that before and never expected to see it again. And I put that down in print just to show Carleton that he doesn't know everything.
WRT to the OP, I argue that you are worrying about a whole lot of nothing. When I was young and fast, I used 42 cm bars, just like on my road bike. That worked fine, just like it did for about a zillion other "endurance" track riders. Later, when I wasn't as young and wasn't as fit, and tried to hide it as short distance rider, I used 38 cm bars, just like all the other short distance guys. That worked fine too. Hmm...
Short version: the width of your handlebars just isn't going to make a difference in your results. Find a pair that feels right to you (don't tell your girlfriend I said that) and then train your ass off. That's all there really is to it.
WRT to the OP, I argue that you are worrying about a whole lot of nothing. When I was young and fast, I used 42 cm bars, just like on my road bike. That worked fine, just like it did for about a zillion other "endurance" track riders. Later, when I wasn't as young and wasn't as fit, and tried to hide it as short distance rider, I used 38 cm bars, just like all the other short distance guys. That worked fine too. Hmm...
Short version: the width of your handlebars just isn't going to make a difference in your results. Find a pair that feels right to you (don't tell your girlfriend I said that) and then train your ass off. That's all there really is to it.
#4
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am planning to show Carleton my bike tossing in person as soon as possible since we race on the same track (you are racing this year right?). So after I come around him with my bike all back and forth and stuff ...
As for training, that is already in the works and is going very well, and I have many years of play under my belt so I know how to get that done. So in my off time I am nit picking equipment choices to figure out what I can improve. I already have the frame and wheelset that I want. I just decided on the tires for this years racing, so the big stuff that matters is all decided. Now I just need to decide on the little stuff. I have been using a steel nitto bar that weighs almost a kilo forever and am toying with the idea of getting a new bar with aero top. The only thing to figure out is the width and material.
Jamie
As for training, that is already in the works and is going very well, and I have many years of play under my belt so I know how to get that done. So in my off time I am nit picking equipment choices to figure out what I can improve. I already have the frame and wheelset that I want. I just decided on the tires for this years racing, so the big stuff that matters is all decided. Now I just need to decide on the little stuff. I have been using a steel nitto bar that weighs almost a kilo forever and am toying with the idea of getting a new bar with aero top. The only thing to figure out is the width and material.
Jamie
#5
Senior Member
Join Date: Mar 2007
Posts: 6,401
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
IMO, if you are a distance/endurance/omnium rider, use the same alloy or carbon bars you use for road racing. If you are a sprinter, use a 38 cm. steel bar, or - if you're up-to-date - one of the one-piece carbon wunderbars used by the guys who don't have to pay for their own stuff.
Then, get the hell off the internet and back to the gym where you belong.
HTH!
<edit> Did they ever fix the transitions at Alpenrose? I got to the point that I started referring to my wheels as landing gear. I'm still not sure if the locals thought that was funny or not...
Last edited by Six jours; 03-15-14 at 01:15 AM.
#6
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
As for me, I have a firm theory of resting my legs more than I train them ... so internet time is rest time ... but thanks for the help. Oh, and I am mostly an omnium rider, but I really like to give our local sprinters fits as much as I can.
#7
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
You guys are awesome
Great to see you back, Six. I'll see you at the track tomorrow afternoon, jmikmi. I'll bee the fat guy on a white Tiemeyer (not waving my bars)
Great to see you back, Six. I'll see you at the track tomorrow afternoon, jmikmi. I'll bee the fat guy on a white Tiemeyer (not waving my bars)
#8
Senior Member
Join Date: Mar 2007
Posts: 6,401
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
They have done a bit of work. They fixed the primary transition issue over 15 years ago for the world masters games. They have done a few minor tweaks since then and I would say the track is very friendly to out of town riders now. The corners are still pretty tight, but it works and getting air is pretty much a thing of the past. I have to say that I really hated corner 1 during miss-n-outs and almost any corner in a sprint, but I also knew that out of towners hated it even more ... so I actually miss it now.
So what I'm trying to say is "Give 'em hell" - regardless of your handlebar width.
#9
Senior Member
Join Date: Mar 2007
Posts: 6,401
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
Well, jmikmi might be. I'm just an old fat guy with a bunch of stories no one cares about. FWIW, I never really went away. I've just been on the wagon, so had the sense to stay away from this forum. Now that I'm back on the sauce, well, that's your misfortune, isn't it?
#11
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But I am no Mark Cavendish! I need that bike wave to get up to speed, or at least that is how I do it. Seems to work for me, so I am still mixed ... leaning towards going narrow ... but still worried I will lose my station as the little guy with the widest elbows on the track. I like create my space on the track through fear and intimidation.
Are there any other bars, other than the scatto that are flat topped and worthy of a sprint? The deda, nitto, easton and even the cinelli are all round top bars. Zipp ... the sprinter in me says that will be weak ... anyone race on those? The aero weannie in me says flatter is better, scatto is my only choice that seems worthy but it is on the narrow side. If the calendar would just flip to May I could be done with all this and just race, but for now I ponder equipment while resting for my next interval session.
Jamie
Are there any other bars, other than the scatto that are flat topped and worthy of a sprint? The deda, nitto, easton and even the cinelli are all round top bars. Zipp ... the sprinter in me says that will be weak ... anyone race on those? The aero weannie in me says flatter is better, scatto is my only choice that seems worthy but it is on the narrow side. If the calendar would just flip to May I could be done with all this and just race, but for now I ponder equipment while resting for my next interval session.
Jamie
#13
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
jmikmi, do you need your bars to have forearm clearance for standing starts or a grip area up top for Madison exchanges?
Yeah, they are popular among sprinters and enduros alike. They are the "handlebar of reference" these days. They are narrow, short, shallow, aero, carbon, etc... 3T got it right with these. The only people that don't seem to be able to make use of them are the Madison riders who need a grip area up top to hold during exchanges.
Some people are even using them for Kilos.
Yeah, they are popular among sprinters and enduros alike. They are the "handlebar of reference" these days. They are narrow, short, shallow, aero, carbon, etc... 3T got it right with these. The only people that don't seem to be able to make use of them are the Madison riders who need a grip area up top to hold during exchanges.
Some people are even using them for Kilos.
#14
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have my kilo/pursuit bar setup done, I am looking for a bar for everything but madisons. I plan to keep my nitto steel bars in place for the madison, want a more aero bar for mass starts and sprints. The scattos are at the top and I would have bought them if not for the price and the width. Although the width is still a likely advantage, it is a change and change is bad ... and yes that doesn't make sense, but I was hoping for better options instead of only having a single choice.
#15
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
I have my kilo/pursuit bar setup done, I am looking for a bar for everything but madisons. I plan to keep my nitto steel bars in place for the madison, want a more aero bar for mass starts and sprints. The scattos are at the top and I would have bought them if not for the price and the width. Although the width is still a likely advantage, it is a change and change is bad ... and yes that doesn't make sense, but I was hoping for better options instead of only having a single choice.
#16
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Alpenrose - Portland
Posts: 361
Bikes: Veloforma for my primary.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
40 c-c has been my bar of choice for years. So going to a 37 is not horrible, I am just trying to figure out in my head if narrow is really better or just a fad. I don't like to pay money for fads. And if narrow is better, why not just go all the way to the 35. While I don't like change, I really don't like to pay for change that doesn't work. However it always comes down to a case study of one ... me. I was just hoping to get some additional feedback from people here who might have made the switch and regretted it or not.
#17
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
40 c-c has been my bar of choice for years. So going to a 37 is not horrible, I am just trying to figure out in my head if narrow is really better or just a fad. I don't like to pay money for fads. And if narrow is better, why not just go all the way to the 35. While I don't like change, I really don't like to pay for change that doesn't work. However it always comes down to a case study of one ... me. I was just hoping to get some additional feedback from people here who might have made the switch and regretted it or not.
Remember, the 3T Sphinx bars came out around the same time? Those didn't last. They could be considered a fad. Even if the UCI didn't all but ban them, many were enchanted by them and tried them but went back to normal bars. They are rare at local races where they are still legal.
#18
Senior Member
Join Date: Oct 2013
Posts: 149
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
FSA Wing Pro bars and some of the other AL road semi aero bars are a lot less money and not much less aero if you do not need the sprinter wrist clearance.
#19
Senior Member
Join Date: Dec 2012
Location: South Africa
Posts: 429
Bikes: S-1 :-D
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But I am no Mark Cavendish! I need that bike wave to get up to speed, or at least that is how I do it. Seems to work for me, so I am still mixed ... leaning towards going narrow ... but still worried I will lose my station as the little guy with the widest elbows on the track. I like create my space on the track through fear and intimidation.
If you like to stick your elbows out to create space, then a narrower bar to be more aero seems a little pointless. If you are still going to stick your elbows out the small aero benefit of the narrower bar will be float away on the parachute of your position .
That aside, if you still want the pretty narrow bar, but are still concerned that you wont be able to flap your bike from side to side, you do mention that you have good upper body strength - that should negate any reduction in leverage from going narrower.
A question - is your bike-flailing really for speed, or secretly part of your fear and intimidation tactic..
#20
Senior Member
Join Date: Aug 2008
Location: Santa Ana
Posts: 279
Bikes: Fuji Elite, 3Rensho track, Trek Madone 6.9, Specialized MTB, GT MTB, Cannondale Cad3 fixie
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I also vote for the Scattos. I ride 40 mm on the road, and 37 with the Scattos (or is it 38? I'm old and my memory is fading). Carleton and others are correct, the Scattos have enough room so you can use them easily for standing starts. I found I had better 500 m times with the Scattos than I did with aero bars, due mostly to the improved start positioning and leverage.
#21
Senior Member
Join Date: Feb 2014
Location: Southern Cali
Posts: 53
Bikes: Specialized Langster and Cannondale CAAD10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would not get the scatto's they will wreck your fit! They are also not necessary and are a common cleshay among people trying to buy speed. Especially for an enduro doing longer events it will close up your chest to much. Even for a sprinter hyper narrow bars are not necessary take Francois Pervis who is currently the fastest in the world. For a sprinter his shoulders are quite narrow yet he is not riding hyper narrow bars.
Also think back to when Theo Bos had the 200m world record. He did that on Pro track bars which are 40cm. Hyper narrow bars are not essential to going fast. If I was in your situation I would go for a bar like the Cobra track bar sold on Euro Asia. They are 38 o-o and plenty stiff. I have ridden these bars to two state championship wins.
Also think back to when Theo Bos had the 200m world record. He did that on Pro track bars which are 40cm. Hyper narrow bars are not essential to going fast. If I was in your situation I would go for a bar like the Cobra track bar sold on Euro Asia. They are 38 o-o and plenty stiff. I have ridden these bars to two state championship wins.
#22
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
I would not get the scatto's they will wreck your fit! They are also not necessary and are a common cleshay among people trying to buy speed. Especially for an enduro doing longer events it will close up your chest to much. Even for a sprinter hyper narrow bars are not necessary take Francois Pervis who is currently the fastest in the world. For a sprinter his shoulders are quite narrow yet he is not riding hyper narrow bars.
Also think back to when Theo Bos had the 200m world record. He did that on Pro track bars which are 40cm. Hyper narrow bars are not essential to going fast. If I was in your situation I would go for a bar like the Cobra track bar sold on Euro Asia. They are 38 o-o and plenty stiff. I have ridden these bars to two state championship wins.
Also think back to when Theo Bos had the 200m world record. He did that on Pro track bars which are 40cm. Hyper narrow bars are not essential to going fast. If I was in your situation I would go for a bar like the Cobra track bar sold on Euro Asia. They are 38 o-o and plenty stiff. I have ridden these bars to two state championship wins.
#24
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
STRUCTURE: CARBON
SIZES: 350MM / 370 MM / 400 MM (CENTRE TO CENTRE)
REACH: 83 MM
DROP: 117 MM
Look Cycle - AERO TRACK HANDLEBAR - Accessories - Track
I'm guessing that Pervis didn't use the 40mm bars. From the looks in this video, I'd guess that he's using the 37mm.
#25
Elitist
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 15,965
Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 1386 Post(s)
Liked 92 Times
in
77 Posts
Zero Talent, you want to go over all of the World Records (Elite and Masters) that have since been broken using narrow bars?
...and State Championship records, too
...and State Championship records, too