Continental GP5000 Tour de France tan: PROBLEM?
#1
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,423
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 624 Times
in
399 Posts
Continental GP5000 Tour de France tan: PROBLEM?
I’ve been GP5000’s for a while and used to ride on GP4000’s, no issues. But I bought some of these “special edition” tanwall 700x25’s, two pair, and put one pair on my 1961 Gitane. They look great!
Oddly, the bike has been more or less finished for a couple of months, but only took it for an 18-mile shakedown ride this morning. I really like riding this bike; but, four miles from home, something felt odd and I looked down to see the front tire going flat. Shoot, might be my ongoing issue with shifting Velox rim tapes? I do not know yet. I had forgotten how excrutiatingly tight these were to install, and I could not get the tire off using the plastic tire levers that come with some packs of Continental tubes… could not even get under the tire bead at all, they are that tight! So, a four mile walk in cycling shoes - not happy.
I mean these things are tight; to the degree that, were it not mechanically impossible (someone fact check me on this), I’d think I had 700C tires on 27” rims. I just looked, the rims are mismatched with Rigida front and Wolber rear, but both say 700C on the stickers.
Anyone else experience this? As in, so tight tire changing is nearly impossible?
I’ll look and see if I have a regular GP5000 in the workshop to see if it fits better, even if blackwall. I might need to change tire type… were some tire mismanufactured? How to tell? I might be researching to see if can find another tire in tanwall with anything near the GP5000’s performance. And, while I have no issues with 25mm, i have vast clearance and could run up to 30mm, which would look odd to my eye but I know there are many stating that wider is faster.
And I need to dig out my old, thin style, metal tire irons; pretty sure I used them to install the tires (no simple pushing on with thumbs), and see about getting this tire off.
Oddly, the bike has been more or less finished for a couple of months, but only took it for an 18-mile shakedown ride this morning. I really like riding this bike; but, four miles from home, something felt odd and I looked down to see the front tire going flat. Shoot, might be my ongoing issue with shifting Velox rim tapes? I do not know yet. I had forgotten how excrutiatingly tight these were to install, and I could not get the tire off using the plastic tire levers that come with some packs of Continental tubes… could not even get under the tire bead at all, they are that tight! So, a four mile walk in cycling shoes - not happy.
I mean these things are tight; to the degree that, were it not mechanically impossible (someone fact check me on this), I’d think I had 700C tires on 27” rims. I just looked, the rims are mismatched with Rigida front and Wolber rear, but both say 700C on the stickers.
Anyone else experience this? As in, so tight tire changing is nearly impossible?
I’ll look and see if I have a regular GP5000 in the workshop to see if it fits better, even if blackwall. I might need to change tire type… were some tire mismanufactured? How to tell? I might be researching to see if can find another tire in tanwall with anything near the GP5000’s performance. And, while I have no issues with 25mm, i have vast clearance and could run up to 30mm, which would look odd to my eye but I know there are many stating that wider is faster.
And I need to dig out my old, thin style, metal tire irons; pretty sure I used them to install the tires (no simple pushing on with thumbs), and see about getting this tire off.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#2
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,469
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1827 Post(s)
Liked 3,367 Times
in
1,573 Posts
this matches my experiences with Continental tires on vintage rims. In addition to carrying some metal tire irons with a sharp enough lip to get under the bead, I carry a small tire jack tool called EZ-Clincher:
Steve in Peoria
Steve in Peoria
Likes For steelbikeguy:
#3
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,778
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3583 Post(s)
Liked 3,395 Times
in
1,929 Posts
VAR makes a similar bead jack, with included tire levers:
#4
Happy With My Bikes
Join Date: Sep 2020
Location: Oklahoma
Posts: 2,182
Bikes: Hi-Ten bike boomers, a Trek Domane and some projects
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 880 Post(s)
Liked 2,304 Times
in
1,114 Posts
Mine are tight, but I managed to mount mine as easily as any other tire I've encountered. In fact I had to dismount one of mine and remount after getting distracted and mounting it backwards. I have mine on modern Bontrager tubeless ready rims so I don't know if that makes any difference.
__________________
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
"It is the unknown around the corner that turns my wheels." -- Heinz Stücke
#5
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
If your tires are that tight, I would use a different tape than Velox. I don't leave the house on tires I couldn't change by hand, and that includes bikes with tubeless-compatible rims or stiff wire-beaded winter tires (thankfully not on the same wheels!)
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 09-05-21 at 02:03 PM.
#6
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,237 Times
in
653 Posts
Bike Hand Tire Seating Tool
After nearly 50 years of mounting bike tires using my hands plus lots of different tools, I found one that works the best for me: the Bike Hand Tire Seating Tool
I've seen these marketed under several different brands.
About the toughest rims I've mounted tires on are the old Ambrosio Elite 19 model.
verktyg
I've seen these marketed under several different brands.
About the toughest rims I've mounted tires on are the old Ambrosio Elite 19 model.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#7
Senior Member
Join Date: Nov 2015
Posts: 4,474
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1635 Post(s)
Likes: 0
Liked 824 Times
in
533 Posts
One can just imagine the possible crazy results of combining these apparently undersized GP 5000s with a notoriously hard to tire rim like the Ambrosio Elite.....
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#8
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,844
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,047 Times
in
1,253 Posts
Should not be possible without ripping the tire bead apart.
#9
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,423
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 624 Times
in
399 Posts
THIS!!!!! Sadly, too many months between when I mounted the tires and when I took the shakedown ride. Forgot.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#11
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,469
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1827 Post(s)
Liked 3,367 Times
in
1,573 Posts
Considering how often this topic gets discussed, I wonder if there is any way to get tire manufacturers to publish their actual bead diameter, instead of the nominal 622mm bsd?
Offhand, I imagine they would prefer not to, since that would/might imply there was some sort of guarantee that they would maintain that value.
It would be very interesting to know whether they measure the bead diameter of every tire coming off of the production line, or if it is just a go/no-go gauge, or what.
Steve in Peoria
Offhand, I imagine they would prefer not to, since that would/might imply there was some sort of guarantee that they would maintain that value.
It would be very interesting to know whether they measure the bead diameter of every tire coming off of the production line, or if it is just a go/no-go gauge, or what.
Steve in Peoria
#12
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,642
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 2,511 Times
in
1,049 Posts
FWIW, I've never had a problem getting Continental 4000s or 5000s onto Mavic Open Pro rims; they all but install themselves, and is a major reason why I ride that combination so much. Getting them onto a pair old old Weinmann (I think) "Gentlemen" rims, however, is basically impossible without a prying device like Steelbikeguy and verktyg showed above. I have two Kool-Stop Bead Jacks - one in the tool collection and one for carrying in my pocket on rides. I used the Bead Jack for pretty much all tire installations now as my hands are not as strong as the used to be.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#13
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Velox cloth tape is a quality product, and I use it on a few wheels... but it's thick, and sometimes that makes the tire fit way tighter than it needs to. Even if you don't plan to set a wheel up tubeless, "tubeless tape" or the like can be great because it's thin and strong. Try some Kapton 1 mil or Scotch 8898 or Tesa 4289 tape in 1/2" width, two layers, and see if that makes it easier to get tires on and off.
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 09-06-21 at 10:01 AM.
#14
Senior Member
Join Date: Nov 2015
Posts: 4,474
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1635 Post(s)
Likes: 0
Liked 824 Times
in
533 Posts
Question is, how does a big, established tire company like Continental get this tire so wrong??
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#15
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
#16
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,865 Times
in
1,439 Posts
Velox cloth tape is a quality product, and I use it on a few wheels... but it's thick, and sometimes that makes the tire fit way tighter than it needs to. Even if you don't plan to set a wheel up tubeless, "tubeless tape" or the like can be great because it's thin and strong. Try some Kapton or Scotch 8898 or Tesa 4289 tape in 1/2" width, two layers, and see if that makes it easier to get tires on and off.
__________________
My Bikes
My Bikes
#17
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,605
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
#18
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,605
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10947 Post(s)
Liked 7,473 Times
in
4,181 Posts
Conti 5k TDF tires fit easily for me. Hand mount without a struggle.
Meanwhile, I wrestled with some 28mm Panaracer GK slicks tonight- both pulling off and putting back on the wheel. I put that same tire on one of my kid's bikes a couple months ago and it went on without a thought.
Some tires mount easier on some wheels and some are torturous on those same wheels, but are a breeze on other wheels.
Likes For mstateglfr:
#19
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
With Velox or other cloth tape, I use the narrowest tape I can get that will cover the spoke holes but not climb up the rim walls. That helps with tight fitting tires.
Otherwise, ditto the more rigid plastic rim strips like the Conti Easy Tape, Schwalbe high pressure rim strips, etc. Or Gorilla tape or tubeless tape.
The tricky bit is squeezing the beads together from both sides of the tire, into the center channel. But if the center channel is shallow and the cloth rim tape is thick, that's a problem. And with new tires it's hard to keep the beads squeezed together around the entire... umm... tire.
I'm guessing Conti is erring on the side of a tighter fit to ensure compatibility with tubeless rims.
FWIW, I've been very satisfied with Conti GP Classic skinwalls for a couple of years on three bikes. Rolling resistance isn't quite on par with the GP5k or GP4k tires, but they're still very good and easy to mount with just my hands and unmount with a single plastic tire lever. And I like the reddish brown sidewalls better than the lighter tan or cream sidewalls used on some tires (including the Soma Supple Vitesse, which are otherwise excellent tires).
Otherwise, ditto the more rigid plastic rim strips like the Conti Easy Tape, Schwalbe high pressure rim strips, etc. Or Gorilla tape or tubeless tape.
The tricky bit is squeezing the beads together from both sides of the tire, into the center channel. But if the center channel is shallow and the cloth rim tape is thick, that's a problem. And with new tires it's hard to keep the beads squeezed together around the entire... umm... tire.
I'm guessing Conti is erring on the side of a tighter fit to ensure compatibility with tubeless rims.
FWIW, I've been very satisfied with Conti GP Classic skinwalls for a couple of years on three bikes. Rolling resistance isn't quite on par with the GP5k or GP4k tires, but they're still very good and easy to mount with just my hands and unmount with a single plastic tire lever. And I like the reddish brown sidewalls better than the lighter tan or cream sidewalls used on some tires (including the Soma Supple Vitesse, which are otherwise excellent tires).
Likes For canklecat:
#21
Senior Member
#22
Senior Member
Thread Starter
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,423
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 624 Times
in
399 Posts
FWIW, I've never had a problem getting Continental 4000s or 5000s onto Mavic Open Pro rims; they all but install themselves, and is a major reason why I ride that combination so much. Getting them onto a pair old old Weinmann (I think) "Gentlemen" rims, however, is basically impossible without a prying device like Steelbikeguy and verktyg showed above. I have two Kool-Stop Bead Jacks - one in the tool collection and one for carrying in my pocket on rides. I used the Bead Jack for pretty much all tire installations now as my hands are not as strong as the used to be.
Velox cloth tape is a quality product, and I use it on a few wheels... but it's thick, and sometimes that makes the tire fit way tighter than it needs to. Even if you don't plan to set a wheel up tubeless, "tubeless tape" or the like can be great because it's thin and strong. Try some Kapton or Scotch 8898 or Tesa 4289 tape in 1/2" width, two layers, and see if that makes it easier to get tires on and off.
I question that premise. Continental's own rim tape is -- drum-roll -- thinner than Velox: https://www.biketiresdirect.com/prod...tape-rim-strip
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#23
Full Member
I’m typically using Stans rim tape now. I think it is kapton with some white tint mixed in, kapton is typically clear/yellowish. I know two layers are recommended but I only lay down one. I have a lot of trust in the durability of the material. Has anyone ever had issues wit one layer of Kapton or Stans failing?
FSA makes a non-adhesive continuous strip (like the Conti) that is thin and stretches slightly into place. I like this one if it can closely match the channel width of the rim I’m using. It’s handy if you think you may need to remove it for access to nipples, etc.
I’ve tried the Conti black strips too, seem to recall them being thicker. They might be fine.
I’ve given up on the cotton Velox in favor of plastic as it dries out faster when wet.
FSA makes a non-adhesive continuous strip (like the Conti) that is thin and stretches slightly into place. I like this one if it can closely match the channel width of the rim I’m using. It’s handy if you think you may need to remove it for access to nipples, etc.
I’ve tried the Conti black strips too, seem to recall them being thicker. They might be fine.
I’ve given up on the cotton Velox in favor of plastic as it dries out faster when wet.
#24
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,469
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1827 Post(s)
Liked 3,367 Times
in
1,573 Posts
Well, one thing I won't be doing is changing rims to better fit the tires. And I think I need to check, I bought a bead jack a while back, but to carry it I'd need to replace every under-seat bag I own due to size. I did see something called a TyreKey online last night, it might be an option, more portable.
Steve in Peoria
#25
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
Well, that's an option. Wow, almost ten bucks and I presume that's per wheel? Not per pair?
Disclaimer: I haven't used the above products specifically. But Pacenti blue tape and Stan's tape work on the same principle.
__________________
RUSA #7498
Originally Posted by noglider
People in this forum are not typical.
Last edited by ThermionicScott; 09-17-21 at 12:50 PM. Reason: fixing quotes