Best brake shoes/pads for classic caliper rim brakes?
#1
Newbie
Thread Starter
Best brake shoes/pads for classic caliper rim brakes?
Need to get some replacement brake shoes for my Shimano 600 brake calipers (similar to the one in the photo below).
Any input on what are the best? Any thoughts on difference in performance with long vs short brake shoes/pads?
Any input on what are the best? Any thoughts on difference in performance with long vs short brake shoes/pads?
Likes For mtbikerjohn:
#3
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,097
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 801 Post(s)
Liked 1,000 Times
in
654 Posts
There is lots of love for the Kool stop salmons. I have them too on one of my bikes. I also have Jagwire road pads and I like them a lot too.
#4
Newbie
Thread Starter
#5
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times
in
819 Posts
The worst brake pads I ever head were black Shimanos. I could barely stop on a descent with Campag. sidepulls, which themselves are nothing to brag about, anyway.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#6
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,988
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 464 Times
in
255 Posts
Another fan of Kool Stop salmon pads here. No worries about wear when I get several thousand miles out of a pair here in steep Seattle where there’s many opportunities for long and hard braking. I use them in the Kool Stop holders (spare pads included in the purchase price!) that allow easy toe and tilt adjustments, then simple replacement several years later. I get the “Dura Type” replacements. They’re on both my fendered rain bike and the unfendered bike.
This Cross version, with V-brake type threaded posts, was a handy way to increase pad “height” on my brazed-post center pull, but the included triple compound pad wasn’t great, quickly replaced with full salmons.
This Cross version, with V-brake type threaded posts, was a handy way to increase pad “height” on my brazed-post center pull, but the included triple compound pad wasn’t great, quickly replaced with full salmons.
Last edited by Dfrost; 08-24-21 at 01:03 PM.
Likes For Dfrost:
#7
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,625
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times
in
1,574 Posts
Can't go wrong with Kool Stop salmons. They look different than stock brake pads, but having them on your bike has become a way to identify yourself as one of the "cool kids."
#8
seńor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 8,237
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times
in
3,183 Posts
If I were the op, the question is more, what particular Kool Stops would look appropriate for those S600 calipers?
If they were Campy, I would say to find the $25 Campy Mathauser pad that fits the Campy holder. Anything else just doesn't look right (to me).
However, for my '80s Dura Ace calipers, I'm using the holders that came with Tektros and the inexpensive Shimano Kool Stop pads that fit them. I tried some silver holders in these calipers, and they didn't look as good as these black ones.
.
.
So, if you could find these inexpensive, ubiquitous holders, you can then benefit by being able to purchase the inexpensive Kool Stop "Dura" pads that fit them. The problem is finding the holders, 'cause they're pretty expensive if purchased separately.
If they were Campy, I would say to find the $25 Campy Mathauser pad that fits the Campy holder. Anything else just doesn't look right (to me).
However, for my '80s Dura Ace calipers, I'm using the holders that came with Tektros and the inexpensive Shimano Kool Stop pads that fit them. I tried some silver holders in these calipers, and they didn't look as good as these black ones.
.
.
So, if you could find these inexpensive, ubiquitous holders, you can then benefit by being able to purchase the inexpensive Kool Stop "Dura" pads that fit them. The problem is finding the holders, 'cause they're pretty expensive if purchased separately.
Likes For SurferRosa:
#9
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,450
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1820 Post(s)
Liked 3,330 Times
in
1,564 Posts
I very much appreciate Kool Stop's creation of pads that fit some of the vintage brake shoes. Their pads are on my Campy sidepull and Weinmann centerpull brakes on my vintage bikes, in addition to their pads & shoes on my non-vintage bikes.
My only complaint is that the salmon pads have been more prone to squealing in humid conditions. Even when the pads are old (and the rims are too), I've had brakes that squealed when conditions are humid (i.e. most of the summer here in the midwest).
As far as long pads vs short.. I don't think I've noticed a difference. I have cantilevers on one bike, which often offer the option of long brake pads/shoes. The long ones tend to hit the fork blades. Use whatever you have. If the opportunity comes up to experiment, it might be fun to try both versions, but I doubt it will make much difference.
Steve in Peoria
My only complaint is that the salmon pads have been more prone to squealing in humid conditions. Even when the pads are old (and the rims are too), I've had brakes that squealed when conditions are humid (i.e. most of the summer here in the midwest).
As far as long pads vs short.. I don't think I've noticed a difference. I have cantilevers on one bike, which often offer the option of long brake pads/shoes. The long ones tend to hit the fork blades. Use whatever you have. If the opportunity comes up to experiment, it might be fun to try both versions, but I doubt it will make much difference.
Steve in Peoria
#10
Senior Member
Scott Mathauser. I don't care what they look like... they work even when wet unlike Kool Stop's.
__________________
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
1984 Cannondale ST
1985 Cannondale SR300
1980 Gary Littlejohn Cruiser
1984 Trek 760
1981 Trek 710
Pics
#11
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,097
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 801 Post(s)
Liked 1,000 Times
in
654 Posts
Likes For Velo Mule:
#12
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,340
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 502 Post(s)
Liked 623 Times
in
425 Posts
Brake Pads for late 70's Gipiemme Caliper - like Campy?
On a recent acquisition, there are Late 70's Gipiemme Caliper brakes, they do seem similar to Campy NR...
Wondering if anyone has these and what pads they're using with them.
The ones currently on are certainly original... hit the brakes and count to 50...
All opinions are appreciated.
Thanks
Yuri
Wondering if anyone has these and what pads they're using with them.
The ones currently on are certainly original... hit the brakes and count to 50...
All opinions are appreciated.
Thanks
Yuri
#13
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,337
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times
in
395 Posts
Dia Compe/Cane Creek Gray Matter brake pads are outstanding and cheap. Really soft compound. I'd get them over the salmon pads all day long. Pack of ten for less than $10.
https://www.ebay.com/itm/11153940545...BoC398QAvD_BwE
https://www.ebay.com/itm/11153940545...BoC398QAvD_BwE
Likes For Lazyass:
#15
Newbie
Thread Starter
Any input regarding compatibility between campagnolo/shimano and between different types (long/short) of brake pads on old brake calipers?
Would any of the two brakes shoes on the left work with campagnolo caliper pictured on the right?
Would any of the two brakes shoes on the left work with campagnolo caliper pictured on the right?
#16
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,173
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked 322 Times
in
189 Posts
#17
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,580
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1601 Post(s)
Liked 2,187 Times
in
1,092 Posts
Just don't do this
2008-06-01 08.43.29 on Flickr
Two points off, wrong pads (depth) and clashing tire/bike colors.
2008-06-01 08.43.29 on Flickr
Two points off, wrong pads (depth) and clashing tire/bike colors.
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#18
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,860
Bikes: many
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 1434 Post(s)
Liked 1,363 Times
in
747 Posts
Dredging up an old thread... I have Shimano 600 calipers like the OP (probably 6207?) which will need new pads. I know I can replace the holders altogether, and probably have some of those inexpensive Taiwanese grey pads/holders laying about. I saw lots of mention of Kool Stop salmons, which is fine, but I saw no mention of what might fit the Shimano holders. It doesn't seem like KS manufacturers pads expressly for them. Maybe some of the other options fit?
#19
Garage tetris expert
Join Date: May 2016
Location: Texas Hill Country
Posts: 912
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 689 Times
in
327 Posts
Dredging up an old thread... I have Shimano 600 calipers like the OP (probably 6207?) which will need new pads. I know I can replace the holders altogether, and probably have some of those inexpensive Taiwanese grey pads/holders laying about. I saw lots of mention of Kool Stop salmons, which is fine, but I saw no mention of what might fit the Shimano holders. It doesn't seem like KS manufacturers pads expressly for them. Maybe some of the other options fit?
https://www.bikeforums.net/classic-v...l#post22341333
#20
Port
Join Date: Jan 2008
Location: Boston
Posts: 9,496
Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 1,803 Times
in
1,037 Posts
Yokozuna's version of the old Scott Mathauser Super Brake pads are very good.
https://www.yokozunausa.com/shop/pro...0?category=715
https://www.yokozunausa.com/shop/pro...0?category=715
__________________
https://rowdml.tripod.com/panmass
https://rowdml.tripod.com/panmass
#22
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,092
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,450 Times
in
723 Posts
Replaceable! My friend Kevin just got some. I think they are the same shape and slide-in pattern as the pads on the original Scott Superbrake. Not bonded like the older Mathauser finned pads that old school tandemists liked using so much.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#23
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,171
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1554 Post(s)
Liked 1,274 Times
in
846 Posts
Salmon-colored pads from the major brake pad vendors seem to grip well, especially in wet weather, but I am recalling that Kool-Stop advised that the black compound is grippier than the salmon compound in dry conditions.
And, with respect to squealing, the higher the grip, the greater tendency for the overall setup to squeal under any particular conditions of humidity, all else being equal of course.
An especially good combo emerges with pads having the salmon compound in the "leading" or rearward-facing direction, and with the black compound facing in the forward direction, thus achieving a better balance of braking power and resistance to squealing. This is better than using toe-into achieve the same end, because the lever feel will be firmer and because there will be less need (if any) for the pads to be re-toed as the pads wear flat to the rim.
I fitted Kool-Stop dual-compound "MTB" pads to my 1964 Varsity after finding every other kind of pads (including salmon) to feel squishy and weak on the long-reaching, old Weinmann calipers (gripping half-anodized MA40 rims).
Braking was suddenly more than acceptably responsive!
And, with respect to squealing, the higher the grip, the greater tendency for the overall setup to squeal under any particular conditions of humidity, all else being equal of course.
An especially good combo emerges with pads having the salmon compound in the "leading" or rearward-facing direction, and with the black compound facing in the forward direction, thus achieving a better balance of braking power and resistance to squealing. This is better than using toe-into achieve the same end, because the lever feel will be firmer and because there will be less need (if any) for the pads to be re-toed as the pads wear flat to the rim.
I fitted Kool-Stop dual-compound "MTB" pads to my 1964 Varsity after finding every other kind of pads (including salmon) to feel squishy and weak on the long-reaching, old Weinmann calipers (gripping half-anodized MA40 rims).
Braking was suddenly more than acceptably responsive!
Last edited by dddd; 12-23-21 at 10:09 AM.