My fiancee got hit by a car. Now I'm trying to replace her Reynolds Crescent frame
#51
Newbie
Thread Starter
Well, guys I have a frame here that supports all of those issues. But the pics indicate she did not have eyelets on the original bike. However since there is radio silence about this search I am going to step aside unless contacted by the OP. Most of the C&V crowd know of my proclivity to help other members out. If this doesn't work for the OP my feelings won't be hurt. Smiles, CrapMaster Honk
#52
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18351 Post(s)
Liked 4,502 Times
in
3,346 Posts
https://www.facebook.com/marketplace...tory_type=post
Just happened upon this as I was poking around Facebook Marketplace. Not lugged so not the level you're hunting for but a good sign that they're out there.
Click through to the fourth picture for the surprise!
Just happened upon this as I was poking around Facebook Marketplace. Not lugged so not the level you're hunting for but a good sign that they're out there.
Click through to the fourth picture for the surprise!
"varldsmastarcykeln crescent" apparently means world champion, but not necessarily that bike.
https://www.facebook.com/marketplace...tory_type=post
This one however... lugs for days. On MP for 9 weeks, I bet you could strike a deal.
This one however... lugs for days. On MP for 9 weeks, I bet you could strike a deal.
I'm guessing a little larger. 56cm to 58cm?
#53
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,033
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,374 Times
in
3,666 Posts
Sorry to drop off the face of the earth! Been really tied up at work and haven't had the time to check up on this post. Didn't realize people were still commenting. I'm going to show her these pics. She's pretty fixated on finding another Crescent but this is a nice, nice bike. Thank you again for posting these pics. What would you say is the tire clearance? She likes to ride 30-32 m, usually cross tires. We have pretty rough roads and fun lil gravel paths around here we like to get out on.
#54
FalconLvr
Join Date: Jun 2006
Location: SW Virginia
Posts: 1,296
Bikes: 62 Falcon, 58 Raleigh Lenton Gran Prix, 74 Raleigh Pro, 75 Raleigh Int, 75 Raleigh Comp, 76 Colnago Super, 75 Crescent, 80 Peugeot PX10, plus others too numerous to mention!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 107 Times
in
66 Posts
To the OP: This is what I have: top of line “Pepita” model, full Reynolds 531 butted tubes, forks and stays. Campy dropouts. No dents or dings but usual paint chips. 56cm c to c. You mentioned you live in southern Ohio, I am in sw Virginia but so happens I will be driving through southern Ohio (from Charleston WV to Dayton) next Thursday or Friday. This bike is probably what your fiancé had, but 2cm taller. PM me if interested. ew
Likes For evwxxx:
#55
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
To the OP: This is what I have: top of line “Pepita” model, full Reynolds 531 butted tubes, forks and stays. Campy dropouts. No dents or dings but usual paint chips. 56cm c to c. You mentioned you live in southern Ohio, I am in sw Virginia but so happens I will be driving through southern Ohio (from Charleston WV to Dayton) next Thursday or Friday. This bike is probably what your fiancé had, but 2cm taller. PM me if interested. ew
Likes For noobinsf:
Likes For nswartsell:
#57
FalconLvr
Join Date: Jun 2006
Location: SW Virginia
Posts: 1,296
Bikes: 62 Falcon, 58 Raleigh Lenton Gran Prix, 74 Raleigh Pro, 75 Raleigh Int, 75 Raleigh Comp, 76 Colnago Super, 75 Crescent, 80 Peugeot PX10, plus others too numerous to mention!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 107 Times
in
66 Posts
Likes For nswartsell:
#59
Newbie
Thread Starter
Hey all. Wondering if someone out there might be able to help me replace my fiancee's bike.
Her dad bought a 54 cm orange Crescent bicycle with some nice lugs and Reynolds 531 tubing in the 1970s. He passed it down to her when she was 13 and she's ridden it nearly every day since.
A couple weeks ago a driver ran a red light and hit her. She's ok -- bruised up but she fell away from the car, thank goodness. Her bike wasn't so lucky. It ended up under the car as it sped away. We have not been able to locate it.
On top of the trauma of being hit by a car, she's just heartbroken her bike is gone. It means so much to her. There is no way to replace it, but I'm trying to do the next best thing and locate another one. If anyone has any leads on a 52 or 54 cm orange Crescent (the Reynolds version with lugs, not the lower-quality version), I'd gladly pay a very fair price for the frame or a complete bike. We're in southern Ohio, but I'd pay for shipping in most cases.
Thanks for reading this and for any help you might be able to give.
Her dad bought a 54 cm orange Crescent bicycle with some nice lugs and Reynolds 531 tubing in the 1970s. He passed it down to her when she was 13 and she's ridden it nearly every day since.
A couple weeks ago a driver ran a red light and hit her. She's ok -- bruised up but she fell away from the car, thank goodness. Her bike wasn't so lucky. It ended up under the car as it sped away. We have not been able to locate it.
On top of the trauma of being hit by a car, she's just heartbroken her bike is gone. It means so much to her. There is no way to replace it, but I'm trying to do the next best thing and locate another one. If anyone has any leads on a 52 or 54 cm orange Crescent (the Reynolds version with lugs, not the lower-quality version), I'd gladly pay a very fair price for the frame or a complete bike. We're in southern Ohio, but I'd pay for shipping in most cases.
Thanks for reading this and for any help you might be able to give.
Likes For nswartsell:
#60
Garage tetris expert
Join Date: May 2016
Location: Texas Hill Country
Posts: 888
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 386 Post(s)
Liked 691 Times
in
328 Posts
I’m glad you found it, and thanks for letting us know. Another week and folks here would’ve completed their imagined bike build, boxed and shipped it.
By the way, I keep reading your thread title on my mobile like this: “My fiancee got hit by a car. Now I'm trying to replace her..”
By the way, I keep reading your thread title on my mobile like this: “My fiancee got hit by a car. Now I'm trying to replace her..”
Last edited by panzerwagon; 09-27-22 at 07:52 PM.
Likes For panzerwagon:
#61
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1301 Post(s)
Liked 1,903 Times
in
1,137 Posts
panzerwag,
Your phone is killing me!
nswartsell: You should check into your home owners insurance to see if they might cover the costs of the replacement parts to see her made whole. Many companies will cover costs of hit and run types of accidents for the cyclist. the LBS should create a list of parts and consumables that were damaged and give you a price for the replacements. When I worked full time in a shop I did numerous appraisals for damage that were almost always compensated for the cyclist. Glad you found the frame and can rebuild it. Smiles, MH
Your phone is killing me!
nswartsell: You should check into your home owners insurance to see if they might cover the costs of the replacement parts to see her made whole. Many companies will cover costs of hit and run types of accidents for the cyclist. the LBS should create a list of parts and consumables that were damaged and give you a price for the replacements. When I worked full time in a shop I did numerous appraisals for damage that were almost always compensated for the cyclist. Glad you found the frame and can rebuild it. Smiles, MH
#62
too many bikes
Join Date: Aug 2013
Location: Berkeley, CA
Posts: 64
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Likes: 0
Liked 30 Times
in
16 Posts
Thank you all for your incredible kindness! Our LBS got in contact today and told us someone found her bike on the side of the road and brought it into the shop. We'd posted a lot on social media so I guess the finder recognized it. LBS checked it out and the frame appears straight/rideable though some components are gonna need some attention. Crazy. We're very glad to have it back.
I really enjoyed this thread.
#63
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18351 Post(s)
Liked 4,502 Times
in
3,346 Posts
Glad the bike was recovered. Check the frame for alignment (which can be adjusted).
Post some photos, and an inventory of what needs replaced.
Post some photos, and an inventory of what needs replaced.
#64
Full Member
Please do post a photograph of the full drive-side of the recovered Crescent...
along with a list of needed parts for the repairs.
Some of our members might surprise you with donated parts.
along with a list of needed parts for the repairs.
Some of our members might surprise you with donated parts.