Campy old friction shifter with 9 sp cassette?
#1
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Spain
Posts: 185
Bikes: Tommasini, Caad 7 , Seven, Pinarello
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 65 Post(s)
Likes: 0
Liked 15 Times
in
10 Posts
Campy old friction shifter with 9 sp cassette?
Currently I run 10sp campy cassete with Campy FRICTION shifters for front and rear derailleur, all perfect but I don,t use the 10 cogs so I can mont 8 or 9 sp cassete with the same shifters ?
The rear hub is Campy record 9/ 10 sp maybe 8 ?
The rear hub is Campy record 9/ 10 sp maybe 8 ?
#2
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
If it works with 10 cogs, it will work with 9.
I have Campy Triomphe shifters friction shifting a 10-speed cassette on my rain bike.
I have Campy Triomphe shifters friction shifting a 10-speed cassette on my rain bike.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#4
Senior Member
Yea, it should just work the same as with a 10sp cassette. You may need to adjust the limit screws on the derailleur.
I also have 10sp rear on a Campy friction bikes with NR on one and SR on the other. They work great that way and shift much better than the old 6 speed freewheels. The ramps on the cassette make the shifts smooth and the spacing is so tight that you are almost never between gears so it is quiet. No more clang, clang, clang.
I also have 10sp rear on a Campy friction bikes with NR on one and SR on the other. They work great that way and shift much better than the old 6 speed freewheels. The ramps on the cassette make the shifts smooth and the spacing is so tight that you are almost never between gears so it is quiet. No more clang, clang, clang.
#5
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Spain
Posts: 185
Bikes: Tommasini, Caad 7 , Seven, Pinarello
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 65 Post(s)
Likes: 0
Liked 15 Times
in
10 Posts
Yea, it should just work the same as with a 10sp cassette. You may need to adjust the limit screws on the derailleur.
I also have 10sp rear on a Campy friction bikes with NR on one and SR on the other. They work great that way and shift much better than the old 6 speed freewheels. The ramps on the cassette make the shifts smooth and the spacing is so tight that you are almost never between gears so it is quiet. No more clang, clang, clang.
I also have 10sp rear on a Campy friction bikes with NR on one and SR on the other. They work great that way and shift much better than the old 6 speed freewheels. The ramps on the cassette make the shifts smooth and the spacing is so tight that you are almost never between gears so it is quiet. No more clang, clang, clang.
#6
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
If you are already using the 10 speed, wait for them to wear out, and then buy 9 speed if you want.
10 speed Veloce cassettes are cheap, so maybe go 9 or 10, depending on price.
10 speed Veloce cassettes are cheap, so maybe go 9 or 10, depending on price.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#7
Hump, what hump?
Join Date: Dec 2003
Location: SC midlands
Posts: 1,934
Bikes: See signature
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 227 Times
in
145 Posts
Damn. Now I’ll have to try my Shimano 600s with a 10-speed cassette.
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
#10
Senior Member
Over the years I've been saying on the forums that the cassette ramps and chains that followed them were what made shifting so much easier, not so much the indexing. Early indexing didn't have them and was just as hard to shift as friction, in fact harder because you didn't have trim so if it wasn't perfectly adjusted it didn't work well at all. I have an old Cannondale that had Suntour 6sp indexing and it was awful. This isn't to say that I don't like indexing, my main ride is Chorus 10sp, but when I go back to my bike with the friction downtube it feels just fine to ride.
#11
Senior Member
Thread Starter
Join Date: Sep 2009
Location: Spain
Posts: 185
Bikes: Tommasini, Caad 7 , Seven, Pinarello
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 65 Post(s)
Likes: 0
Liked 15 Times
in
10 Posts
No, not really. I've used both and neither really need trim, or at least you get used to shifting this way. You need very little movement of the shifter and it feels very natural. The ramps force the chain up or down rather than the derailleurs position and you instinctively know when it is right. The old freewheels had much larger spacing so you'd frequently be between gears or not quite in it. Like I said above, no more clang, clang, clang.
Over the years I've been saying on the forums that the cassette ramps and chains that followed them were what made shifting so much easier, not so much the indexing. Early indexing didn't have them and was just as hard to shift as friction, in fact harder because you didn't have trim so if it wasn't perfectly adjusted it didn't work well at all. I have an old Cannondale that had Suntour 6sp indexing and it was awful. This isn't to say that I don't like indexing, my main ride is Chorus 10sp, but when I go back to my bike with the friction downtube it feels just fine to ride.
Over the years I've been saying on the forums that the cassette ramps and chains that followed them were what made shifting so much easier, not so much the indexing. Early indexing didn't have them and was just as hard to shift as friction, in fact harder because you didn't have trim so if it wasn't perfectly adjusted it didn't work well at all. I have an old Cannondale that had Suntour 6sp indexing and it was awful. This isn't to say that I don't like indexing, my main ride is Chorus 10sp, but when I go back to my bike with the friction downtube it feels just fine to ride.
#12
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#13
Senior Member
Join Date: Mar 2011
Posts: 3,094
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1034 Post(s)
Liked 1,290 Times
in
743 Posts
No, not really. I've used both and neither really need trim, or at least you get used to shifting this way. You need very little movement of the shifter and it feels very natural. The ramps force the chain up or down rather than the derailleurs position and you instinctively know when it is right. The old freewheels had much larger spacing so you'd frequently be between gears or not quite in it. Like I said above, no more clang, clang, clang.
Over the years I've been saying on the forums that the cassette ramps and chains that followed them were what made shifting so much easier, not so much the indexing. Early indexing didn't have them and was just as hard to shift as friction, in fact harder because you didn't have trim so if it wasn't perfectly adjusted it didn't work well at all. I have an old Cannondale that had Suntour 6sp indexing and it was awful. This isn't to say that I don't like indexing, my main ride is Chorus 10sp, but when I go back to my bike with the friction downtube it feels just fine to ride.
Over the years I've been saying on the forums that the cassette ramps and chains that followed them were what made shifting so much easier, not so much the indexing. Early indexing didn't have them and was just as hard to shift as friction, in fact harder because you didn't have trim so if it wasn't perfectly adjusted it didn't work well at all. I have an old Cannondale that had Suntour 6sp indexing and it was awful. This isn't to say that I don't like indexing, my main ride is Chorus 10sp, but when I go back to my bike with the friction downtube it feels just fine to ride.
#14
Senior Member
Join Date: Mar 2011
Posts: 3,094
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1034 Post(s)
Liked 1,290 Times
in
743 Posts
I have seen people running 10 speed chains on a 9 speed cassette, some say it works fine, others say no. There is not a lot of difference between them so a 10 speed chain will work on the 9 speed cassette. For me, if I were changing the cassette, I would buy a new chain anyway, so I would simply buy a new 9 speed chain. That is just me though. Try it and see how you like it. Change it if necessary.
Last edited by phughes; 11-26-19 at 11:20 AM.