Handlebar Diameter (drops, bend area)
#1
Senior Member
Thread Starter
Join Date: Sep 2009
Posts: 947
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 261 Times
in
129 Posts
Handlebar Diameter (drops, bend area)
I know there are different handlebar diameters where the stem clamps the bar. My question is whether the other areas of the bar (alloy road bars, like FSA) have different diameters between brands and models. I thought these FSA Omega Compact bars I bought for one bike were same as bars on my road bike (same make and model, bought close to 10 years ago), but they feel like a much smaller diameter. I’m guessing it’s the bar tape, however, I’ve had this same tape and it was way thicker feeling on a previous handlebar in had for this bike.
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,071
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4199 Post(s)
Liked 3,851 Times
in
2,301 Posts
Drop bar diameters range from 22.2 to 24.5mm aprox. for common ones. A little while ago some brand offered a bigger diameter but I haven't seen them any longer. No surprise as the levers being made by other companies would have to also be bigger in size to fit. 22.2mm is the "classic" steel bar diameter with the stem clamp area expanded to 25.4. 23.5/23.8 is the "classic" Al bar size. Note that both will reduce at the curves as when a tube is bent it usually is deformed from a true round shape.
Bar wrap can vary in it's thickness and if added layers are wrapped can be rather large in diameter. Andy
Bar wrap can vary in it's thickness and if added layers are wrapped can be rather large in diameter. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Senior Member
Join Date: Mar 2012
Posts: 981
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 506 Post(s)
Likes: 0
Liked 638 Times
in
356 Posts
I know there are different handlebar diameters where the stem clamps the bar. My question is whether the other areas of the bar (alloy road bars, like FSA) have different diameters between brands and models. I thought these FSA Omega Compact bars I bought for one bike were same as bars on my road bike (same make and model, bought close to 10 years ago), but they feel like a much smaller diameter. I’m guessing it’s the bar tape, however, I’ve had this same tape and it was way thicker feeling on a previous handlebar in had for this bike.
#4
Senior Member
Thread Starter
Join Date: Sep 2009
Posts: 947
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 261 Times
in
129 Posts
I’m now thinking that in addition to how the tape was applied and it’s thickness, the older FSA bars are flatter on top. Hard to tell with tape on there and each bar has a gel padding beneath the tape.