Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

28mm tires on paved roads . . . have you tried them? Do you like them?

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway
View Poll Results: Have you tried 28mm tires? Do you like them better than 25's? (Vote all that apply)
I tried tubeless 28's. I like them.
58
22.14%
I tried tubeless 28's. I don't like them.
5
1.91%
I tried tubed 28's. I like them.
184
70.23%
I tried tubed 28's. I don't like them.
3
1.15%
I've never tried 28mm bike tires for very long.
10
3.82%
I'm not interested in going to 28's at all.
23
8.78%
Multiple Choice Poll. Voters: 262. You may not vote on this poll

28mm tires on paved roads . . . have you tried them? Do you like them?

Old 12-09-19, 07:10 AM
  #1  
FlashBazbo
Chases Dogs for Sport
Thread Starter
 
FlashBazbo's Avatar
 
Join Date: Feb 2007
Posts: 4,288
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 983 Post(s)
Liked 141 Times in 94 Posts
28mm tires on paved roads . . . have you tried them? Do you like them?

It seems most people have made the switch to 25mm tires. But much of the cycling press would like us to believe that if 25mm is good, 28mm must be better! I'm about to mount up a set of tubeless tires on my general, all-purpose road bike. If you've tried 28's, I'm curious what you think of them. Do you run them the same pressure you would run 25's? Do you like them for the comfort or the speed? Do you think the comfort is worth the loss of speed (if any)? And are you tubed or tubeless? Let's keep this to paved roads (of whatever quality). Gravel changes the equation in a lot of ways. Have you tried 28mm tires long term on pavement? Do you like them? Do they live up to the hype?
FlashBazbo is offline  
Old 12-09-19, 07:38 AM
  #2  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
My first road tubeless were 25s, some top of the line Gavias. Great tires that rode wonderfully, though my frame of reference at the time was 23/25mm tubed tires.

Then I tried 30mm tires (Schwalbe G-One Speed) - suuuuper awesome for a bigger guy like me (~200lb at the time). Being able to run them at 70psi was a game-changer - long rides were much less fatiguing and they rolled really, really well; a magic carpet ride on so-so roads. I'd been so happy with them that I stuck with them exclusively for a few years and told myself that I wouldn't buy another bike unless the frame could clear them.

This year, I tried some 28mm Hutchison Fusion 5 Performance 11-Storm. My weight is down, so I've been able to run them at the same ~70psi, too. Not quite as cush as the G-One Speeds, even at the same pressure. They seem to roll about the same, though they feel notably more nimble (I don't know if it's a slight change in trail with the slightly smaller diameter or the lower weight, but it's certainly there).

On spirited group rides, neither has been a hindrance, neither in a straight line nor when thrashing out of the saddle (in a pinch, I have taken some 35/38mm tires out with the group and they were a *lot* more work). Solo, they're both definitely beneficial (faster) over longer rides (3+ hours) just because I'm fresher and less beat up. On shorter rides, I'm doubtful that any penalty (aero, weight, etc) would be statistically significant.

No desire to go back to 25s.
WhyFi is offline  
Old 12-09-19, 07:41 AM
  #3  
Rides4Beer
Senior Member
 
Join Date: Oct 2018
Location: VA
Posts: 1,437

Bikes: SuperSix Evo | Revolt

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times in 414 Posts
Love my 28mm GP5Ks, they measure out to 30mm on my rims (20c) and are just as fast as the 23's I used to run. If anything, I can go faster because they're more comfortable/stable on the crappy roads here. I'll never go back.
Rides4Beer is offline  
Likes For Rides4Beer:
Old 12-09-19, 08:05 AM
  #4  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 8,553

Bikes: Nekobasu, Pandicorn, Lakitu

Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 4905 Post(s)
Liked 1,731 Times in 958 Posts
Unless you're of the die-hard C&V crowd, there's a fair chance you ride on 28s now. I'm on not-too-wide 19mm internal wheels, any my 700x25 tubeless Giant Gavias mount to 27.5mm wide. If I want to actually run 25, I need to buy a 23.

On my CX frame, a 700x28 is the narrowest I've ever run, and none of them mounted to 28 wide-- the Continentals I ran some years ago inflated to almost 31mm wide.

A wider tire is something of a trade-off: you're opting to beat your body up less at the loss of some aerodynamic efficiency. The added comfort is absolutely worth it.
__________________
DrIsotope is offline  
Likes For DrIsotope:
Old 12-09-19, 08:09 AM
  #5  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Related note: the new 2020 Schwalbe Pro One TLE Souplesse looks like it has finally hit some retailers. Really looking forward to trying them in a 28mm once the price dips to the $50-ish neighborhood.
WhyFi is offline  
Old 12-09-19, 08:21 AM
  #6  
big chainring 
Senior Member
 
Join Date: Sep 2007
Location: Wilmette, IL
Posts: 7,317
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 746 Post(s)
Liked 717 Times in 347 Posts
You think 700×28's are good riding? Wait till you go 27×1 1/4. As someone thats been into cycling for 50 years, it just makes me laugh. Now just waiting to see the next new thing, 5 speed cassettes! Great chain angles, more efficient, chains last longer, and what you do is vary your cadience more, which someone will do a study on and find its less fatigueing. We're all riding on a carousel of time.
big chainring is offline  
Likes For big chainring:
Old 12-09-19, 08:42 AM
  #7  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 8,553

Bikes: Nekobasu, Pandicorn, Lakitu

Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 4905 Post(s)
Liked 1,731 Times in 958 Posts
__________________
DrIsotope is offline  
Old 12-09-19, 08:49 AM
  #8  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Originally Posted by big chainring
You think 700×28's are good riding? Wait till you go 27×1 1/4. As someone thats been into cycling for 50 years, it just makes me laugh. Now just waiting to see the next new thing, 5 speed cassettes! Great chain angles, more efficient, chains last longer, and what you do is vary your cadience more, which someone will do a study on and find its less fatigueing. We're all riding on a carousel of time.
You're just fishing for an "okay, Boomer," aren't you?
WhyFi is offline  
Old 12-09-19, 08:59 AM
  #9  
FlashBazbo
Chases Dogs for Sport
Thread Starter
 
FlashBazbo's Avatar
 
Join Date: Feb 2007
Posts: 4,288
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 983 Post(s)
Liked 141 Times in 94 Posts
Originally Posted by DrIsotope
Unless you're of the die-hard C&V crowd, there's a fair chance you ride on 28s now.
Yes, my 25mm tubeless on ENVE SES wheels actually measure 29mm wide. But, for purposes of this thread, let's keep it to 28mm nominal (marked 28mm on the sidewall) tires.
FlashBazbo is offline  
Old 12-09-19, 10:43 AM
  #10  
berner
Senior Member
 
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340

Bikes: Specialized Secteur, old Peugeot

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times in 299 Posts
Speed and comfort are not the only criteria for bike tires. In my opinion 28 or wider tires are more likely to ride over debris on the road than narrower tires.
berner is offline  
Old 12-09-19, 10:51 AM
  #11  
Cyclist0108
Occam's Rotor
 
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times in 1,164 Posts
I switched out my puny little anorexic 28mm GP40000 II's, which were a measly 30mm on my rims, and put on some Compass Barlow Pass 38mm and pumped them up real good to 35 psi in the front, 40 psi in the back. They "feel" a wee bit more sluggish, but my GPS data say otherwise. (Jan says people sometimes subjectively interpret a harsher ride as a faster ride.)
Cyclist0108 is offline  
Likes For Cyclist0108:
Old 12-09-19, 12:02 PM
  #12  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 4,261
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1971 Post(s)
Liked 1,297 Times in 629 Posts
Originally Posted by FlashBazbo
It seems most people have made the switch to 25mm tires. But much of the cycling press would like us to believe that if 25mm is good, 28mm must be better!
Most people have made the switch to 28mm tires at least, really, regardless of what the sidewall says.

I started on 28s; my first road bike was my grandfather's, and it originally came with 28s, so I stuck with that width. I first tried 23s when I got my Emonda.

If you've tried 28's, I'm curious what you think of them. Do you run them the same pressure you would run 25's?
No. The wider the tire, the less pressure it needs to feel composed on the road. I ride 28s at around 10% lower pressure than 25s.

When I do smooth road rides on my gravel bike (which has 53s), I don't inflate them above 40PSI. 40PSI would be extremely squirmy on a 25mm road tire, but feels fine when a tire is so big.

Do you like them for the comfort or the speed?
Comfort achieved through adequate compliance is speed.

But I wouldn't say that I notice much difference either way. 25s are big enough for most paved roads around here to achieve adequate compliance without feeling underinflated. I haven't noticed any performance differences from switching between tires in the 20s. (Even my gravel bike with its 53s performs within a mph of my Emonda, and there are likely factors other than tire width slowing it down.)
Obviously wide tires can compromise the aerodynamics of a wheel somewhat. On an aero wheel, I'd tend to run whatever the wheel manufacturer says it was made for.

And are you tubed or tubeless?
Tubed. I've only pinched once on the road, and we don't have quite enough pinhole stabby things to make tubeless seem worth it. Most of my friends are tubed, but I've actually spent more time on the roadside in the last few years waiting for friends to sort out problems with road tubeless setups than tubed.

Originally Posted by DrIsotope
Unless you're of the die-hard C&V crowd, there's a fair chance you ride on 28s now.
Even if you're of the die-hard C&V crowd, there's a fair chance you ride on 28s or bigger now. Until the mid-1980s, most road bikes could fit 30mm or bigger tires no problem.
HTupolev is offline  
Old 12-09-19, 12:15 PM
  #13  
RedBullFiXX
Senior Member
 
RedBullFiXX's Avatar
 
Join Date: Jul 2017
Location: SoCal USA
Posts: 188
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 41 Times in 33 Posts
Like the way 28mm Pro One TL feel on the flats, rollers (30mm + mounted)
Went back to 25mm TL for 2 reasons, lighter, and climb much better (28mm + mounted)
Now on GP5000TL, (27mm + mounted)
RedBullFiXX is offline  
Old 12-09-19, 12:34 PM
  #14  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4741 Post(s)
Liked 3,860 Times in 2,509 Posts
I've been riding 28c tires on my winter/rain/city fix gear since I went clincher on it 20 years ago. Three summers ago I went to then new 28c Vittoria G+ and have been sold from the first ride. But it is not just the width. Those are very high quality tires. I've ridden 28c's that were crap and that I took off as soon as I could.

My good fix gear is set up on the G+ but with 28c in front and 25c in back. (It has traditional biggish ti chainstays. When the wheel is slid all the way forward on the dropout, 25c's are close ans 28c's don't fit at all. On a big hill day, I will bring both the 12 tooth and 24 tooth cogs and use the entire dropout. Until i need to do something tire related, I cannot tell that I have different tires front and rear, The bike just feels right. (Rode Cycle Oregon on it last September. Had no tire issues at all and never thought about them; except the morning of day 4. Wet and below freezing! Had frozen water maybe inside my tires, Until things melted, a very disconcerting ride. It had been so wet that going into that freeze dry simply wasn't possible. This guy who has ridden a half dozen car-less winters in Michigan and Massachusetts saw some new wrinkles!)

Us old timers remember the silk Clemente Del Mondo tubulars (probably 30c though no one measured or talked about width numbers then). They were the ultimate luxury ride. They were faster than any clincher of the day and many of the cheaper and lighter cotton tubulars. The big G+ tires are the closest I've ridden to those tires in many decades.

Yes, those tires I like, the G+ (and now G 2.0) are expensive. But I only get to go around this life once. I want to do it on nice rubber. (Plus those G+/G 2.0s grip better and crash less than many/most other tires, making this go-'round that much better.)

Ben
79pmooney is offline  
Old 12-09-19, 01:20 PM
  #15  
RockiesDad
Full Member
 
Join Date: Oct 2015
Location: Bay Area, CA
Posts: 427
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 220 Post(s)
Liked 31 Times in 17 Posts
So what about going to 30mm or even 32mm? Are we hitting the point of diminishing returns going up in size for road bikes???
RockiesDad is offline  
Old 12-09-19, 01:29 PM
  #16  
Cyclist0108
Occam's Rotor
 
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times in 1,164 Posts
Cram in as wide a tire as possible.

I just bought a frame that will allow for 55mm tires.
Cyclist0108 is offline  
Old 12-09-19, 01:51 PM
  #17  
Seattle Forrest
Senior Member
 
Seattle Forrest's Avatar
 
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,645 Times in 6,054 Posts
28 mm nominal ballooned out to 33 mm actual on Enve wheels made for this. Love it.
Seattle Forrest is offline  
Old 12-09-19, 02:56 PM
  #18  
taco2ewsday
Senior Member
 
Join Date: Sep 2019
Location: Memphis 10
Posts: 193

Bikes: 2021 Canyon Endurace SL8, 2019 Cannondale Topstone Sora, 2002 Giant Yukon

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 148 Times in 57 Posts
I ride 32mm on pavement all the time but I"m coming from MTB and wanted a little more comfort.
taco2ewsday is offline  
Old 12-09-19, 03:03 PM
  #19  
FlashBazbo
Chases Dogs for Sport
Thread Starter
 
FlashBazbo's Avatar
 
Join Date: Feb 2007
Posts: 4,288
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 983 Post(s)
Liked 141 Times in 94 Posts
Now, let me get this straight. On this forum, where nobody agrees with anybody about anything . . . nobody who has tried 28mm wide tires didn't like them??? EVERYBODY who tried them liked them?

The Apocalypse is near!
FlashBazbo is offline  
Likes For FlashBazbo:
Old 12-09-19, 03:23 PM
  #20  
WhyFi
Senior Member
 
WhyFi's Avatar
 
Join Date: Jan 2010
Location: TC, MN
Posts: 39,505

Bikes: R3 Disc, Haanjo

Mentioned: 353 Post(s)
Tagged: 1 Thread(s)
Quoted: 20791 Post(s)
Liked 9,436 Times in 4,663 Posts
Originally Posted by RockiesDad
So what about going to 30mm or even 32mm? Are we hitting the point of diminishing returns going up in size for road bikes???
IMO, this is going to be determined by your weight, your roads and your comfort threshold.

For me, once I get to about 65psi, there's very little benefit of going lower, regardless of tire size (if we're talking strictly paved roads), it just doesn't meaningfully add to my comfort, so going bigger than 28/30 is just adding more rotating mass and a larger frontal section (though how much of an aero detriment this is depends on other things, too, like tire/rim profile).

If lighter guys feel perfectly comfortable at 80psi on 25mm tires, cool - in that position, I wouldn't up-size either. If heavier guys need 32s to run at their desired pressure, that's understandable, too.
WhyFi is offline  
Old 12-09-19, 03:24 PM
  #21  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by RockiesDad
So what about going to 30mm or even 32mm? Are we hitting the point of diminishing returns going up in size for road bikes???
It's probably too personal to pin down to any specific point. I went from ~25mm to 28-30mm about eight years ago, and pivoted almost exclusively to 38-42mm tires a couple years ago. They don't seem to slow me down much at the speeds I ride, and my body is much happier afterward.

I don't expect pros and the roadies imitating them to go much beyond 25-28mm for aero/weight reasons, though.

Thankfully, a combination of factors have gone into loosening up the clearances on road bikes, so everyone can find that sweet spot for themselves.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498

Last edited by ThermionicScott; 12-09-19 at 03:41 PM.
ThermionicScott is offline  
Old 12-09-19, 04:02 PM
  #22  
Seattle Forrest
Senior Member
 
Seattle Forrest's Avatar
 
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,645 Times in 6,054 Posts
Originally Posted by WhyFi
IMO, this is going to be determined by your weight, your roads and your comfort threshold.

For me, once I get to about 65psi, there's very little benefit of going lower, regardless of tire size (if we're talking strictly paved roads), it just doesn't meaningfully add to my comfort, so going bigger than 28/30 is just adding more rotating mass and a larger frontal section (though how much of an aero detriment this is depends on other things, too, like tire/rim profile).

If lighter guys feel perfectly comfortable at 80psi on 25mm tires, cool - in that position, I wouldn't up-size either. If heavier guys need 32s to run at their desired pressure, that's understandable, too.
​​​​​​That's the crux of the matter for me. More scenic roads to enjoy.
Seattle Forrest is offline  
Likes For Seattle Forrest:
Old 12-09-19, 04:10 PM
  #23  
BengalCat
Senior Member
 
Join Date: Dec 2015
Location: Brentwood WLA
Posts: 326

Bikes: 50/34, 11-40, 11 Speed

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 142 Post(s)
Liked 73 Times in 52 Posts
On a road bike that is ridden on normal paved roads in decent condition, wider RB tires of a particular line and same model are, regardless of your weight, faster and more comfortable.
BengalCat is offline  
Old 12-09-19, 05:12 PM
  #24  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,611

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4717 Post(s)
Liked 1,526 Times in 997 Posts
Originally Posted by BengalCat
On a road bike that is ridden on normal paved roads in decent condition, wider RB tires of a particular line and same model are, regardless of your weight, faster and more comfortable.
Well.. maybe or not.. This is just rolling resistance -- weight and aero not accommodated.

Sy Reene is offline  
Old 12-09-19, 05:15 PM
  #25  
Seattle Forrest
Senior Member
 
Seattle Forrest's Avatar
 
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,645 Times in 6,054 Posts
Weight doesn't matter on flat ground and the difference in weight we're talking about accounts for 0.0000001% up even the steepest paved road on the planet. Aerodynamics are a lot more complicated than just skinny good fat bad, the interface between the rim and tire are more important. On a set of SES 4.5 ARs, a 28 mm tire is more aero than a 25 mm.
Seattle Forrest is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.