I want a late 80s/early 90s Cannondale
#1
Newbie
Thread Starter
I want a late 80s/early 90s Cannondale
Specifically the R series. Really hoping to get one with a 3.0 frame. Those bikes are just so pretty. However, what do y'all think? There are some in my area for around $300-600, though they're the lower end models (SR500), and I'm not sure if I should be spilling that much for a used aluminum frame. Is it safe to bike one of those after 30 years, even without cracks or the like on the frame? Also I plan on biking on pavement, but by no means freshly paved roads. Will it hold up against the smaller bumps of worn pavement? Thanks!
#2
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,675
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 336 Post(s)
Liked 225 Times
in
136 Posts
I have to say if I was looking for a bike in that age group, it would be steel, but as the saying goes “the heart wants what the heart wants”.
look carefully at every joint and paint scratch.
look carefully at every joint and paint scratch.
Likes For Wileyrat:
#3
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,370
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
For another perspective, after nearly 40 years of riding and racing high-end Italian, English, and American steel bikes, I bought my first aluminum bike in 2005 and consigned my remaining steel bikes to the basement. The five bikes currently in active rotation are all aluminum, including a 1995 Cannondale H300 hybrid I bought last weekend to use as my winter and rain bike.
If the Cannondale that you're considering buying hasn't been crashed or otherwise damaged, it should last at least as long as any comparable steel bike. In support of that claim, see the link to a 1992 frame fatigue test below. Spoiler: the only frames that survived the test were a Cannondale, another aluminum frame from the European bike manufacturer Principia, and a Trek carbon fiber frame. None of the steel or titanium frames survived testing.
12 High-End Frames in the EFBe Fatigue Test
If the Cannondale that you're considering buying hasn't been crashed or otherwise damaged, it should last at least as long as any comparable steel bike. In support of that claim, see the link to a 1992 frame fatigue test below. Spoiler: the only frames that survived the test were a Cannondale, another aluminum frame from the European bike manufacturer Principia, and a Trek carbon fiber frame. None of the steel or titanium frames survived testing.
12 High-End Frames in the EFBe Fatigue Test
#4
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
Specifically the R series. Really hoping to get one with a 3.0 frame. Those bikes are just so pretty. However, what do y'all think? There are some in my area for around $300-600, though they're the lower end models (SR500), and I'm not sure if I should be spilling that much for a used aluminum frame. Is it safe to bike one of those after 30 years, even without cracks or the like on the frame? Also I plan on biking on pavement, but by no means freshly paved roads. Will it hold up against the smaller bumps of worn pavement? Thanks!
The 3.0 might max out at a 25 mm tire which would mean that you might have to plan ahead to make sure your wheelset was especially compliant on rough surfaces. I would say to get a responsive lightweight tubular wheelset with some better tubular tires to maximize your ride. Or, if you are riding clinchers, I would says since you are likely limited to 25 mm maximum width to get some "open tubular" designed tires such as Challenge Strada 320's or any of the Veloflex or Vittoria Open tubulars with the high thread count casing. You could then run them with latex inner tubes and moderate your tire pressure down a bit. Cannondales will challenge you to eliminate every possible source of vibration/oscillation so having headset bearings properly set for example is very important too.
#5
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
I’ve been riding an ‘88 criterium with a steel fork for decades. It is a great bike, and it is dropout width limited, but I haven’t be able to replace it. Maybe someday... I have always wanted a titanium frame.
I never warmed up to the Series 2.8 or 3.0 with the cantilever rear dropouts. Regardless of the marketing, I’ve always understood it to be a fallout of the Klein lawsuit on the seat stays. Obviously Cannondale dropped them as soon as they had the legal opportunity and never looked back.
If I were going for an older Cannondale, I wouldn’t go any further back than a 1997.
John
I never warmed up to the Series 2.8 or 3.0 with the cantilever rear dropouts. Regardless of the marketing, I’ve always understood it to be a fallout of the Klein lawsuit on the seat stays. Obviously Cannondale dropped them as soon as they had the legal opportunity and never looked back.
If I were going for an older Cannondale, I wouldn’t go any further back than a 1997.
John
Likes For 70sSanO:
#6
Senior Member
Join Date: Aug 2009
Posts: 2,388
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1557 Post(s)
Liked 1,733 Times
in
973 Posts
Is there any reason why you specify 'late 80s to early 90's'? If I were you I would look for a mid 90's to early 2000's Cannondale with carbon forks. They have the same styling as the earlier bikes with the fat round tubing, but come with carbon forks which helps dampen the road buzz.
I got a R500 with 650c wheels for my son. It's a pretty bike.
I got a R500 with 650c wheels for my son. It's a pretty bike.
#7
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,923
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1818 Post(s)
Liked 1,693 Times
in
974 Posts
I have no idea what the roads look look where you are, but the poorest paved roads where I live would send me looking for something else than a late '80s or early '90s Cannondale road frame. They often don't have room even for a 700 x 25 tire let alone a 700 x 28 tire that would soften the blows transmitted by those extremely stiff frames. before buying one, find out how wide a tire you can use
Likes For alcjphil:
#8
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,370
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
Apparently there are a few people who still believe the myth that aluminum bikes are inherently more punishing to ride.
As Sheldon Brown said, years ago:
And, as Mario Cipollini said, even earlier:
Last anecdote: when Miguel Indurain retired from racing and Pinarello took back all his bikes, he asked around the pro peloton for recommendations of a bike to buy. It came down to a choice between a Colnago and a Cannondale. He bought the Cannondale.
I remember our area Cannondale sales rep chortling over the report of the bike purchase. He said, "We'd have been happy to give him one of our bikes if he'd asked!"
As Sheldon Brown said, years ago:
"Did you know that:
- Aluminum frames have a harsh ride?
- Titanium frames are soft and whippy?
- Steel frames go soft with age, but they have a nicer ride quality?
- England's Queen Elizabeth is a kingpin of the international drug trade?
And, as Mario Cipollini said, even earlier:
Last anecdote: when Miguel Indurain retired from racing and Pinarello took back all his bikes, he asked around the pro peloton for recommendations of a bike to buy. It came down to a choice between a Colnago and a Cannondale. He bought the Cannondale.
I remember our area Cannondale sales rep chortling over the report of the bike purchase. He said, "We'd have been happy to give him one of our bikes if he'd asked!"
#9
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,505
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2743 Post(s)
Liked 3,390 Times
in
2,053 Posts
#10
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,434
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
I've ridden steel bikes most of my life. I bought a 1985 Cannondale ST 400 a few years back. It was their "sports touring" model so it can take a 700 x 32c tire. It's a heck of a bike. It has a long wheelbase (42 inches) but is very responsive and stable. It's a great bike.
Last edited by bikemig; 01-01-21 at 06:17 AM.
Likes For bikemig:
#11
Senior Member
My favorite old school Cdale is the Caad9. The last of the USA made frames. Before that model it is certainly the cantilevered drop out 3.0. Not practical for anything other than fast riding and racing due to tire fit limitations, but just a plain ol' cool design and super stiff to the point of not exactly all day comfort.
#12
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
Apparently there are a few people who still believe the myth that aluminum bikes are inherently more punishing to ride.
As Sheldon Brown said, years ago:
And, as Mario Cipollini said, even earlier:
Cannondale - is best bike!
Last anecdote: when Miguel Indurain retired from racing and Pinarello took back all his bikes, he asked around the pro peloton for recommendations of a bike to buy. It came down to a choice between a Colnago and a Cannondale. He bought the Cannondale.
I remember our area Cannondale sales rep chortling over the report of the bike purchase. He said, "We'd have been happy to give him one of our bikes if he'd asked!"
As Sheldon Brown said, years ago:
"Did you know that:
- Aluminum frames have a harsh ride?
- Titanium frames are soft and whippy?
- Steel frames go soft with age, but they have a nicer ride quality?
- England's Queen Elizabeth is a kingpin of the international drug trade?
And, as Mario Cipollini said, even earlier:
Cannondale - is best bike!
Last anecdote: when Miguel Indurain retired from racing and Pinarello took back all his bikes, he asked around the pro peloton for recommendations of a bike to buy. It came down to a choice between a Colnago and a Cannondale. He bought the Cannondale.
I remember our area Cannondale sales rep chortling over the report of the bike purchase. He said, "We'd have been happy to give him one of our bikes if he'd asked!"
Cannondale always innovated and their designs steadily evolved for decades. I never actually rode one of the cantilevered seat stay frames but I would tend to believe that they really were harsh.
As for the stereotype that titanium frames are soft and whippy.... well, that perception is also based in past riders’ actual experiences. Now I have a lovely Veritas compact titanium road frame with oversized top and down tubes that is very stiff and amazingly compliant at the same time - quite a magic trick by the builder. But this is where matching the right frame to the right rider requires a proper synergy. A bad match is a bad match. The folks who reject a stiff Cannondale after owning one and saying they moved on and never looked back have legit reasons for forming that opinion.
A high school friend I really looked up to let me ride his Teledyne Titan titanium bike and he rode my Masi Gran Criterium one day. I had lusted after the Teledyne Titanium prior to that. After the ride, I came away unimpressed, deeply disappointed really. That titanium bike was truly “soft and whippy”. I mean the designers were on to something but the frame builders copied the tubing sizes from a steel bike without engineering it for stiffness and the end result was a wet noodle, really!
#13
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,370
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
My favorite old school Cdale is the Caad9. The last of the USA made frames. Before that model it is certainly the cantilevered drop out 3.0. Not practical for anything other than fast riding and racing due to tire fit limitations, but just a plain ol' cool design and super stiff to the point of not exactly all day comfort.
And the "aluminum frames are punishing to ride" myth probably started there. Up to the mid-1980s, the few ultra-short-wheelbase road bikes ridden in the U.S. were, almost exclusively, built up from very expensive Italian framesets and very expensive Italian component groups and used by racers. But then Cannondale introduced their comparatively affordable criterium bikes (complete bikes, that is, not framesets) at a time when many riders were deciding to move up from their generic sport touring bikes to something offering higher performance. Many of them bought Cannondale crit bikes.
It's not surprising that they found the handling of the Cannondales, which were essentially track bikes with brakes and gears added, to be disconcerting fast and unforgiving. And it's understandable that some people associate the ride of a criterium-geometry Cannondale with its being an aluminum frame, but they're mistaken. It's the geometry, not the frame material, that determines how the bike rides.
Likes For Trakhak:
#14
With a mighty wind
Join Date: May 2015
Posts: 2,586
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 859 Times
in
488 Posts
Funny story. In the early 90's I desperately wanted a Cannondale. It was my 13 year old dream.
I have had a lot of bikes since then.
My dad never forgot the Cannondale.
He'll show me a new flyrod and say "it's the Cannondale of flyrods".
I have had a lot of bikes since then.
My dad never forgot the Cannondale.
He'll show me a new flyrod and say "it's the Cannondale of flyrods".
#15
Senior Member
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,212
Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 576 Post(s)
Liked 1,001 Times
in
488 Posts
I understand the affliction. Something like this is easy to admire. Not mine, client wheeled it in. It originally belonged to someone in the family; someone who never rode it.
Likes For DorkDisk:
#16
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
John
#17
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
IMHO, the USA-made (pre-06) 'Dales are some of the best finished 'mass-market' bikes ever made. The welding is damn near seamless. I wouldn't be any more wary of a vintage Cannondale than any other 30+ year old bike.
One thing to note, if you're shopping used'Dales is that they used the same frame across different models, just with different components; so if you're planning on fitting updated wheels and components, there's no frame difference between, say an
R500, 600, or 900
One thing to note, if you're shopping used'Dales is that they used the same frame across different models, just with different components; so if you're planning on fitting updated wheels and components, there's no frame difference between, say an
R500, 600, or 900
#19
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
#20
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
Still can’t really see the cassette. Here the bike is an 8x2. The XC Pro Microdrive short cage rear derailleur has hard, positive shifts with the indexed Command shift levers.
Here’s the photo I was looking for...
Last edited by masi61; 01-01-21 at 02:35 PM.
#21
Newbie
Thread Starter
I've ridden steel bikes most of my life. I bought a 1985 Cannondale ST 400 a few years back. It was their "sports touring" model so it can take a 700 x 32c tire. It's a heck of a bike. It has a long wheelbase (42 inches) but is very responsive and stable. It's a great bike.
Beautiful bike btw!
#22
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,370
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
The ride of a criterium-geometry racing bike is an acquirable taste, but those bikes aren't exactly relaxing to ride and can be, as mentioned earlier in this thread, a bit fatiguing for long rides. The heyday of the criterium bike (whether steel or aluminum) didn't last much past the end of the '80s, and most manufacturers of racing bikes now produce road racing bikes that offer moderately fast handling and reasonable long-distance comfort.
#23
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,434
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Well it's the rider that matters whether a bike is "slow" or "fast." This bike has the relaxed geometry of an old school touring bike (42 inch wheelbase, 18 inch stays) but is more responsive than a steel bike would be with a similar geometry (I own a 1982 Reynolds 531 Trek with very similar geometry). I've ridden my share of racing bikes. This bike is not that responsive but it's a steady bike and reasonably quick handling. I like it for long distance rides since it has a triple crank, 3 water bottle braze ons, and I'm running 32c tires.
#24
Senior Member
Lighter high performance tire are usually 700c and more widely available in numerous models. Not sure what is made currently in 27".
#25
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,923
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1818 Post(s)
Liked 1,693 Times
in
974 Posts
When I started racing in my mid 40's as a master I was riding my 1973 Raleigh Professional which I had bought brand new. If you want to do many races, crits are pretty much unavoidable. Initially, I had much more trouble hanging in in road races, even flat ones than crits. In fact, in my very first crit I snagged a 3rd place podium. My Professional, despite having fairly relaxed geometry, was a great bike for criteriums. It could hold its line through corners as well as any bike I have owned and on rough pavement its compliant frame allowed me to corner much faster than guys on their super stiff crit bikes which left them skittering sideways as I carved through on my flexy Raleigh. Stiffness is not only about frame material. The stiffest bike I own is my steel Bertrand touring bike, it is very unpleasant too ride with 700 x 23 tires, but because it is a touring bike it has room for the much wider 700 x 32 tires that I ride it with currently.My reluctance to ride an earlier Cannnondale road frame has nothing to do with the frame material, those guys pretty much wrote a lot of the early chapters of the book on building reliable, long lasting aluminum bicycle frames. If you want to buy a bike with a really stiff frame, close tire clearances limiting you to narrow tires will make for a bike that will not be enjoyable to ride on poorly paved roads