How to wash my bike with wash gun?
#1
Junior Member
Thread Starter
How to wash my bike with wash gun?
Dogma f10,CP super red 12s,CP ultra bora 50.I don't want water into bearings with water gun.what kind of water gun should I buy?
#2
Galveston County Texas
Join Date: Nov 2007
Location: In The Wind
Posts: 33,221
Bikes: 02 GTO, 2011 Magnum
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1350 Post(s)
Liked 1,243 Times
in
621 Posts
N o n e
Friend washed his Bike at the Car Wash.
Destroyed All the Bearings
Friend washed his Bike at the Car Wash.
Destroyed All the Bearings
__________________
Fred "The Real Fred"
Fred "The Real Fred"
Last edited by 10 Wheels; 06-20-21 at 03:21 PM. Reason: +
#3
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Wrong answer. The correct answer is pretty whatever you can afford. It's not going to wreck your bike by itself, you have to make all the mistakes. I've washed hundreds and hundreds of bikes w/ pressure washer and not killed a single one. This one is great, hopefully it's available somewhere: Muc Off bike washer
Likes For cxwrench:
#4
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,632
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4731 Post(s)
Liked 1,531 Times
in
1,002 Posts
One of these. They come in colors to help match the bike
#5
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Just don’t aim it at parts with bearings.
#6
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,976
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6186 Post(s)
Liked 4,803 Times
in
3,313 Posts
Why don't you just wipe it off with a damp towel? Or use those premoistened towelettes that come in a cannister? If it's not caked with mud, I can't see where you need a hose or pressure washer of any sort.
#7
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,370
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
Garden hose at low pressure plus soft long-bristle and short-bristle brushes. Takes no longer than a pressure washer would. Why risk washing out lubricant?
(My neighbor uses a gasoline-powered leaf blower for the postage-stamp-sized lawn in front of his Baltimore row house. What made me think of that?)
(My neighbor uses a gasoline-powered leaf blower for the postage-stamp-sized lawn in front of his Baltimore row house. What made me think of that?)
#8
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,038
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22583 Post(s)
Liked 8,923 Times
in
4,156 Posts
Garden hose at low pressure plus soft long-bristle and short-bristle brushes. Takes no longer than a pressure washer would. Why risk washing out lubricant?
(My neighbor uses a gasoline-powered leaf blower for the postage-stamp-sized lawn in front of his Baltimore row house. What made me think of that?)
(My neighbor uses a gasoline-powered leaf blower for the postage-stamp-sized lawn in front of his Baltimore row house. What made me think of that?)
#9
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,545
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1526 Post(s)
Liked 718 Times
in
510 Posts
+1 damp rag.
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
#10
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,923
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1818 Post(s)
Liked 1,693 Times
in
974 Posts
Don't do that. No sort of high pressure washer should ever be used on a high end road bike that has not done at least 100 km in torrential rain. Even then, the bike should be completely disassembled and overhauled before it goes back out on the road. Pressure washers are not needed anywhere near a road bike
Likes For alcjphil:
#11
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Don't do that. No sort of high pressure washer should ever be used on a high end road bike that has not done at least 100 km in torrential rain. Even then, the bike should be completely disassembled and overhauled before it goes back out on the road. Pressure washers are not needed anywhere near a road bike
Likes For cxwrench:
#12
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,098
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3422 Post(s)
Liked 3,559 Times
in
1,789 Posts
The 'don't (pressure) wash your bike' myth is just that...a myth. As I posted before I've washed a metric **** ton of bikes, many of them w/ a pressure washer. I think that most of the people claiming all the crazy stuff about pressure washers ruining bikes have never even used one.
It’s a significantly bad idea.
I’ve had to replace rusted headsets on far too many rental bikes, thanks to a clueless mechanic armed with a garden hose.
Put some soapy water in a bucket, apply with a couple of brushes, lightly rinse off with a fine spray from a garden hose, wipe down the frame with an absorbent cloth.
Or if only the frame needs a quick clean, spray some dilute ammonia on the frame, wipe with a soft cloth. I do that almost daily to get off the sweat drops and spilled drink mix.
That is all.
Last edited by terrymorse; 06-20-21 at 10:43 PM.
#13
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
A pressure washer is really good at injecting water into the moving parts of a bicycle. Even a garden hose with a nozzle will do the same.
It’s a significantly bad idea.
Some soapy water in a bucket, a couple of brushes, then lightly rinse off with a fine spray from a garden hose.
That is all.
It’s a significantly bad idea.
Some soapy water in a bucket, a couple of brushes, then lightly rinse off with a fine spray from a garden hose.
That is all.
#14
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,098
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3422 Post(s)
Liked 3,559 Times
in
1,789 Posts
I didn’t write that it can’t be done. I wrote that it’s a significantly bad idea, because it is. And I explained the failure mechanism. And I shared personal experiences of such failures.
The way bearings fail has been studied for at least 100 years. The top causes of bearing failure are loss of lubricant and water contamination. Pressure washing can produce both. Why take the chance?
Last edited by terrymorse; 06-20-21 at 11:06 PM.
Likes For terrymorse:
#15
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
If you’re telling the truth, and you’ve power washed many bikes without ruining moving parts, I say you’ve been lucky.
I didn’t write that it can’t be done. I wrote that it’s a significantly bad idea, because it is. And I explained the failure mechanism. And I shared personal experiences of such failures.
I didn’t write that it can’t be done. I wrote that it’s a significantly bad idea, because it is. And I explained the failure mechanism. And I shared personal experiences of such failures.
Likes For cxwrench:
#16
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,098
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3422 Post(s)
Liked 3,559 Times
in
1,789 Posts
When you've washed bikes as a pro team mechanic for the better part of 15 years 'luck' isn't part of the equation. Knowing what you're doing is a big part of it. Of course if you do it incorrectly you can blow right past seals. If you do it the right way you won't ruin a thing. Pretty much every pro team mechanic I've seen and/or worked with uses pressurized water to wash bikes. It's not hard if you are smart about it.
Pro team bicycle mechanics are equally untrained in engineering and tribology, and they are just as susceptible to picking up stupid tricks, passed down from older mechanics who swear they’ve been “doing it for years with no problems”. I wouldn’t trust any mechanic with a high pressure wand, even the “pro team” ones who claim they are “smart” about how they wield it.
Spraying high pressure water anywhere near bearings is risky. Such practice isn’t allowed in any industry that I can think of. Except bicycles, of course, where myth and lore survive.
__________________
Ride, Rest, Repeat. ROUVY: terrymorse
Ride, Rest, Repeat. ROUVY: terrymorse
Last edited by terrymorse; 06-21-21 at 09:29 AM.
Likes For terrymorse:
#17
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,545
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1526 Post(s)
Liked 718 Times
in
510 Posts
I don't think pro team mechanics are a great example to cite if you're talking practices to promote longevity... Replacing stuff regularly is likely to be preferred to spending more time on daily chores. It's certainly expeditious for them to use pressure washers.
Perhaps the clue is in cxwrench 's name? Mud, as opposed to dust, and cross bikes rather than road bikes?
Perhaps the clue is in cxwrench 's name? Mud, as opposed to dust, and cross bikes rather than road bikes?
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Likes For Kimmo:
#19
Senior Member
Join Date: Sep 2008
Posts: 781
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 479 Post(s)
Liked 277 Times
in
156 Posts
I have used the Hybrid cxwrench method for 40+ years. I wash my bikes.. a LOT. I don't use a pressure washer, but I do use a pre-pressure reducing valve garden hose that has enough pressure to reach the sun (okay, maybe the moon). I use the pressure on the wheels, tires, frame/fork, under the saddle... I dial it back for the drivetrain and hubs, and don't hit the bearings directly. It's not rocket surgery.
In addition to always having very clean bikes, I also ride some old bikes. Somehow, those two are NOT in conflict with each other.
In addition to always having very clean bikes, I also ride some old bikes. Somehow, those two are NOT in conflict with each other.
Last edited by Zaskar; 06-21-21 at 06:36 AM.
#20
Senior Member
Join Date: Jun 2008
Location: A Yankee in Houston, TX
Posts: 1,074
Bikes: State Bicycle Co. Undefeated Track SS/FG, Lynskey Helix-Bronze
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 204 Times
in
95 Posts
At the family home, we've got a 2300 psi electric pressure washer. Anytime I have my bike(s) there and need a good cleaning, I don't hesitate using the pressure washer. I just make sure to switch the nozzle out to 40° and it does the job. I've been cleaning all my bikes this way for the last 14 years and helps rid of all the crud that builds up especially on the cassette and brake calipers.
Likes For primov8:
#21
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,632
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4731 Post(s)
Liked 1,531 Times
in
1,002 Posts
I'm kinda surprised nobody's posted this classic yet.
#23
Senior Member
Join Date: Jan 2010
Posts: 39,229
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18409 Post(s)
Liked 15,518 Times
in
7,324 Posts
Take it in the shower with you.
#24
Senior Member
Join Date: Aug 2009
Posts: 1,297
Bikes: Too many.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 174 Times
in
86 Posts
If my bike is on the roof of my car when I take the car to the carwash it gets sprayed down. None of the bikes that I have been doing this with (for years) have self-destructed. I just don't spray down the bearing surfaces with a high-pressure spray. This isn't exactly rocket science. Use common sense and you'll be fine.
Likes For Andy Somnifac:
#25
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
I don't think pro team mechanics are a great example to cite if you're talking practices to promote longevity... Replacing stuff regularly is likely to be preferred to spending more time on daily chores. It's certainly expeditious for them to use pressure washers.
Perhaps the clue is in cxwrench 's name? Mud, as opposed to dust, and cross bikes rather than road bikes?
Perhaps the clue is in cxwrench 's name? Mud, as opposed to dust, and cross bikes rather than road bikes?
I have used the Hybrid cxwrench method for 40+ years. I wash my bikes.. a LOT. I don't use a pressure washer, but I do use a pre-pressure reducing valve garden hose that has enough pressure to reach the sun (okay, maybe the moon). I use the pressure on the wheels, tires, frame/fork, under the saddle... I dial it back for the drivetrain and hubs, and don't hit the bearings directly. It's not rocket surgery.
In addition to always having very clean bikes, I also ride some old bikes. Somehow, those two are NOT in conflict with each other.
In addition to always having very clean bikes, I also ride some old bikes. Somehow, those two are NOT in conflict with each other.