26" question
#1
Junior Member
Thread Starter
Join Date: Feb 2021
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 14 Times
in
4 Posts
26" question
I have not mountain biked for years. It's been all road, mostly commuting. Plus some track riding. For pure fun factor I find 26" wheels to be the best for me. Maybe 27.5. But 29" feel too large, though of course they are great for going over the big stuff.
Since I am recreational only, there is nothing wrong with 26" right? My old old old MTB is 26" of course. but looking to upgrade.
Thanks...
Since I am recreational only, there is nothing wrong with 26" right? My old old old MTB is 26" of course. but looking to upgrade.
Thanks...
#2
Constant tinkerer
I agree with you, and I'm still riding my old 26" bikes. But 26" wheels have been made "obsolete" by mainstream manufacturers. You aren't likely to find any decent new bikes that use them. But there are tons of old MTBs out there that are just as good as they were 20 years ago.
If you want something new, 27.5" (584) is pretty close to 26" (559) and that small difference wouldn't stop me from getting a new bike, if that's what I wanted (I don't.) Be careful about "upgrading" with a newer bike. Depending what you have now, a new bike in a reasonable price range might be much heavier than your current bike.
If you want something new, 27.5" (584) is pretty close to 26" (559) and that small difference wouldn't stop me from getting a new bike, if that's what I wanted (I don't.) Be careful about "upgrading" with a newer bike. Depending what you have now, a new bike in a reasonable price range might be much heavier than your current bike.
#3
Senior Member
Absolutely there is nothing wrong with 26" wheels on a mountain bike. In fact with the small frame size I use, Its perfect.
With larger frames there's nothing wrong with 27.5" thats popular now either. Both sizes have their advantages. For med size or larger frames I wouldn't rule out either if you really like a specific new bike and it feels right.
Perhaps for serious competitive mountain biking there is a specific size that works best depending on the course. Sometimes its 26", Sometimes larger.
As far as being obsolete goes, I could care less. In fact a 26" tire is one of the criteria I used when buying a new bike in 2018. I know I'll be able to buy new 26" tires for my bike longer than I'll ever need anyway.
With larger frames there's nothing wrong with 27.5" thats popular now either. Both sizes have their advantages. For med size or larger frames I wouldn't rule out either if you really like a specific new bike and it feels right.
Perhaps for serious competitive mountain biking there is a specific size that works best depending on the course. Sometimes its 26", Sometimes larger.
As far as being obsolete goes, I could care less. In fact a 26" tire is one of the criteria I used when buying a new bike in 2018. I know I'll be able to buy new 26" tires for my bike longer than I'll ever need anyway.
Last edited by xroadcharlie; 02-16-21 at 07:44 AM.
Likes For xroadcharlie:
#4
Senior Member
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
There are a lot of factors that go into it.
Depends how tall you are. A large rider will get a lot out of 29. A smaller rider might appreciate 27.5 or 26.
Looking for new + modern tech. Not a lot in 26 size.
Riding modern mtb technical trails. A lot are now being made with FS, disc and 29r capability in mind. Flow trails or non technical stuff can usually be ridden with 26.
And budget. If it's limited, a good used 26r might do. If you are spending enough for new, and the above works in its favor, you would get more bang out of a 29r. Larger gear range, better suspension, better brakes, better clearance.
Depends how tall you are. A large rider will get a lot out of 29. A smaller rider might appreciate 27.5 or 26.
Looking for new + modern tech. Not a lot in 26 size.
Riding modern mtb technical trails. A lot are now being made with FS, disc and 29r capability in mind. Flow trails or non technical stuff can usually be ridden with 26.
And budget. If it's limited, a good used 26r might do. If you are spending enough for new, and the above works in its favor, you would get more bang out of a 29r. Larger gear range, better suspension, better brakes, better clearance.
#5
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
For your kind of riding any kind of bicycle will do.
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty:
#6
jj
Join Date: Jul 2019
Posts: 331
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 140 Post(s)
Liked 110 Times
in
78 Posts
Does your current bike really need anything other than new cables, grips, tires, and paint?
Powdercoat paint jobs are surprisingly cheap and super durable.
You could have a “new” bike for $300 in your ideal perfect color that rides just as nice as a $2K brand new gravel/adventure bike.
There are companies making great tires for 26” wheels, and tire tech has come a long way from where it was 20 years ago.
Powdercoat paint jobs are surprisingly cheap and super durable.
You could have a “new” bike for $300 in your ideal perfect color that rides just as nice as a $2K brand new gravel/adventure bike.
There are companies making great tires for 26” wheels, and tire tech has come a long way from where it was 20 years ago.
#7
Senior Member
Join Date: Dec 2019
Posts: 956
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 263 Times
in
212 Posts
I just built a new frame and fork for my old 26" MTB, modified the stem for threadless, painted it in vibrant 80s colours, put it all back together and it rides fantastic.
But everyone thinks it is uncool. Well I don't care. 90s MTBs are coming back into style. You heard it here first.
But everyone thinks it is uncool. Well I don't care. 90s MTBs are coming back into style. You heard it here first.
#8
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,599
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Liked 699 Times
in
436 Posts
My mtn.bike is older, and has 26" wheels. My height would allow me to go with larger wheels if I was to buy a new bike, which I'm not planning on. If I was buying a new bike, I'd probably go with a larger wheelset, as I do ride some trails with rocks and roots that a larger wheel would roll over easier. I'm doing ok with the 26'ers, but feel that larger would be better for the trails I ride. All depends on what trails you are riding and whether you feel ok on the bike with larger wheels.
#11
Senior Member
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Re read the quote.
The old mtb's are as good as THEY were 20 years ago.
Ummm... Yeah. They didn't turn into cheese.
A top of the line 2000 mtb is still a top of the line 2000 mtb.
#13
Senior Member
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
It's not his error you chose to quote him out of context in order to make your own rhetorical statement.
#14
Word.
Join Date: Jul 2008
Location: Rural New England
Posts: 232
Bikes: Surly Disc Trucker, Orbea Oiz XCountry Bike, Specialized Roubaix, Borealis Echo Fat Bike for Winter, many others out in the barn.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 64 Post(s)
Liked 99 Times
in
51 Posts
Ride what you got.
I was a 26" holdout until 2018. I now have a 29er (with 2.1" tires) and boy, is it easy to ride the technical single track here in central Massachusetts! Just point and pedal. Amazingly capable. No thinking involved. Tons O'fun.
After a couple years with it though, I'm starting to miss the skill required to clear technical sections on a 26" bike; not enough to go back, but enough to appreciate what it took to pick and execute a successful line on such a boney machine.
I was a 26" holdout until 2018. I now have a 29er (with 2.1" tires) and boy, is it easy to ride the technical single track here in central Massachusetts! Just point and pedal. Amazingly capable. No thinking involved. Tons O'fun.
After a couple years with it though, I'm starting to miss the skill required to clear technical sections on a 26" bike; not enough to go back, but enough to appreciate what it took to pick and execute a successful line on such a boney machine.
Last edited by Brett A; 02-16-21 at 02:48 PM.
#15
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
If you are enjoying riding what you have, keep it.
But if you are wanting to upgrading to something new, you’re not going to find anything 26 inch and new that is considered an upgrade.
While I think that most people over-blow the importance of wheel size, I can’t see any reason one would choose a 26” bike over a 27.5 or 29er at this point unless this was for dirt jumping.
I say this as someone who is still riding a FS 26er as my main MTB. It is a great bike, but I am under no illusions that it is due to the small wheel size, and a 27.5 version of this would be even better.
The discussion around wheel size often gets confused with the discussion around geometry. What makes bikes from 2020 more capable than bikes from 2010 is less the wheel size, than it is the geometry.
But if you are wanting to upgrading to something new, you’re not going to find anything 26 inch and new that is considered an upgrade.
While I think that most people over-blow the importance of wheel size, I can’t see any reason one would choose a 26” bike over a 27.5 or 29er at this point unless this was for dirt jumping.
I say this as someone who is still riding a FS 26er as my main MTB. It is a great bike, but I am under no illusions that it is due to the small wheel size, and a 27.5 version of this would be even better.
The discussion around wheel size often gets confused with the discussion around geometry. What makes bikes from 2020 more capable than bikes from 2010 is less the wheel size, than it is the geometry.
Last edited by Kapusta; 02-16-21 at 02:49 PM.
#16
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,624
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,181 Times
in
771 Posts
29 also rolls over imperfections in the trail vs. falling into the ruts like a 26" tired would do.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
#17
Very Senior Member
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211
Bikes: Giant Quasar & Fuji Roubaix
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times
in
244 Posts
I "upgraded" from a 26" Schwinn to a 27.5" Giant FS-I still miss that old Schwinn and all the crazy things I could do on it. Maybe I just miss my youth (71 now). I rode several 29ers before I got the 27.5 and they always felt unwieldy to me. I'm 5'10". But after riding a FS bike I was convinced that was what I wanted. My mistake. I lock out the rear suspension on most trails because I like it stiff and then I'm just dragging extra weight around, except when I hit a more technical trail, which are few and far between around here. Then I readjust it. My first true MTB was a Raleigh 26" hard tail. Hated the shifting on it-for some reason couldn't keep it tuned. I traded it straight across for the Schwinn hard tail. We were both happy.
#18
Senior Member
Join Date: Dec 2019
Posts: 956
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 263 Times
in
212 Posts
29 also rolls over imperfections in the trail vs. falling into the ruts like a 26" tired would do.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
As you can see it's about a quarter of the circumference before the two tyre outlines start to diverge noticeably. It's hard to see how this can make much difference except on very large ruts.
Likes For DMC707:
#20
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
i get what youre saying but youre verbage is confusing
i have a 95 Marin Team Issue with a Tange Prestige frameset, fully rigid that was (and still is) an amazing bicycle. Being rigid, it can still roll with a modern gravel bike if its wearing skinny tires, or mount the 26x2.2’s and it is still just as capable now as it was in 1995. Fast, light, responsive.
Ditto for a ‘00 Yeti FRO - but i would say the vintage Rock Shox front end makes it a little less versatile for wanting to just roll gravel, and if it ever needs a rebuild, its going to be a pain
that said — those bikes are still enormously capable machines and are fun to ride on occasion
However - i ride my 140 trailbike now 95% of the time. Its just so much more comfortable than the old XC race inspired geometry and seating positions of the 90’s - and i have no real racing aspirations anymore
That said - with some minor tweaks of the cockpit on either one of those old bikes (namely for me, a shorty stem and some riser bars, plus a switch to a 1x drivetrain ). - these wont be competitive with a full suspension trailbike, but would be very competitive if you compared them to some of the steel bikes makers like Surly, Salsa or Soma are putting out
im just not going to do anything gravity oriented on an old bike like thaat, but i wouldnt do it on a Surly either
Likes For DMC707:
#21
Senior Member
Join Date: Nov 2014
Location: Ann Arbor Michigan
Posts: 152
Bikes: miyata 83 1000,84 1000,83 610,88 ridge runner ,Schwinn 84 high sierra,88 Cimmeron,86 Passage,84 Stumplumper ,83 Mt Whitney,83 Trek 850,Merckx Century,PX10, RB1,XO 1 XO 4,bunch of stuff like that
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 57 Post(s)
Liked 51 Times
in
42 Posts
26in
26 in wheels are the most popular tire size world wide for 100 years......you also have the widest selection of tires available.....and way cheaper.........26 in wheels are stronger and lighter because they are slightly smaller.....you produce more torque on a smaller wheel......you can have just as much fun as on any other tire............it takes a more skilled rider to roll on 26s dude........bigger tires might give a advantage if you were competing with pro racers........but if youre that good someone will buy you a 29er and pay you to race it..........
Last edited by homelessjoe; 02-17-21 at 12:23 PM. Reason: claify
Likes For homelessjoe:
#22
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
I have not mountain biked for years. It's been all road, mostly commuting. Plus some track riding. For pure fun factor I find 26" wheels to be the best for me. Maybe 27.5. But 29" feel too large, though of course they are great for going over the big stuff.
Since I am recreational only, there is nothing wrong with 26" right? My old old old MTB is 26" of course. but looking to upgrade.
Thanks...
Since I am recreational only, there is nothing wrong with 26" right? My old old old MTB is 26" of course. but looking to upgrade.
Thanks...
But i wouldnt spend too many dollars on upgrading something mid range or lower.
but if by upgrade you mean getting a new bike - there really isnt anything in 26” except for some BMXish dirt jumping type bikes. 27.5” also seems to be going away unless its a “plus size” (3” tires). 29’ers have won the war. I am on the short side (5’8” ) - it took me 2 or 3 rides to get used to the sensation of riding a 29’er, but now that i am used to it, i likely wouldnt go back. The modern 29’er geometry is much more sorted and friendlier for “medium height” guys like myself than the original Fishers and Niners from 15 years ago.
But i happily will ride a 26’er and have done so if for some reason my big bike is not available.
#23
Constant tinkerer
29 also rolls over imperfections in the trail vs. falling into the ruts like a 26" tired would do.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
Picture the difference between a full size truck and a Honda Civic going over the same pothole...The pothole would hardly be felt in the truck, where as it'd probably feel like it was swallowing up your Civic because of the difference in wheel sizes.
Likes For FastJake:
#24
Senior Member
To be honest what you're going to feel between pretty much any 26" mountain bike and pretty much any 27.5/29" wheeled mountain bike is more due to pretty significant changes in geometry in more recently designed bikes than the wheel sizes per se. If you're used to most any 26" wheeled mountain bike, the relatively long wheelbase, slack head angle, short stem, wide bars, low bottom bracket, etc will lead to a bike that feels considerably less responsive at low speeds, on pavement, etc. This is in favor of fairly considerable gains in stability at speed. This generally feels worse for parking lot rides, and on trail until you adapt to the steering of a recent bike. 26" to 27.5" is really a pretty minor difference in rolling diameter--it's closer to 26" than 29" in actual rim diameter.
In realistic terms, there are basically no 26" wheeled mountain bikes beyond the very entry level for an average sized adult for general trail riding purposes--there are only a few dirt jump, and increasingly rarely, downhill bikes available in 26". If you want something that feels a little bit more like what you're used to, consider looking at XC targeted bikes with 27.5 wheels.
In realistic terms, there are basically no 26" wheeled mountain bikes beyond the very entry level for an average sized adult for general trail riding purposes--there are only a few dirt jump, and increasingly rarely, downhill bikes available in 26". If you want something that feels a little bit more like what you're used to, consider looking at XC targeted bikes with 27.5 wheels.
Likes For cpach:
#25
Senior Member
Join Date: Dec 2019
Posts: 956
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 263 Times
in
212 Posts
To be honest what you're going to feel between pretty much any 26" mountain bike and pretty much any 27.5/29" wheeled mountain bike is more due to pretty significant changes in geometry in more recently designed bikes than the wheel sizes per se. If you're used to most any 26" wheeled mountain bike, the relatively long wheelbase, slack head angle, short stem, wide bars, low bottom bracket, etc will lead to a bike that feels considerably less responsive at low speeds, on pavement, etc.
A 26" fully rigid MTB is still a lot of fun though. You just can't ride as difficult stuff for a given skill/confidence level.