Go Back  Bike Forums > Bike Forums > Road Cycling
Reload this Page >

Affordable Modern Steel Road bike options

Notices
Road Cycling “It is by riding a bicycle that you learn the contours of a country best, since you have to sweat up the hills and coast down them. Thus you remember them as they actually are, while in a motor car only a high hill impresses you, and you have no such accurate remembrance of country you have driven through as you gain by riding a bicycle.” -- Ernest Hemingway

Affordable Modern Steel Road bike options

Old 09-11-21, 12:33 PM
  #1  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Affordable Modern Steel Road bike options

I've decided for my next bike I would like a modern road bike with a steel frame. I really like the ride of my vintage bikes, but miss my brifters and indexed shifting. Don't really want to modify an old bike. My only real qualifications are steel frame, wider tires like 30mm+, endurance geometry, and indexed shifting drivetrain with brifters. I want to start searching the used market for one. Hoping for some suggestions of brand and model that I should be looking for. Thinking like a $500 budget. I've seen some Jamis bikes that seem to meet what I'm looking for, but haven't seen one in my size. I'm hoping there are other brands and models I should be looking for. Thanks in advance for any suggestions.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-11-21, 01:26 PM
  #2  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,459
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3637 Post(s)
Liked 5,314 Times in 2,700 Posts
Anything is possible but I wouldn't expect many choices with that budget.
shelbyfv is online now  
Likes For shelbyfv:
Old 09-11-21, 02:31 PM
  #3  
Leinster
Senior Member
 
Join Date: Jun 2013
Location: location location
Posts: 3,033

Bikes: MBK Super Mirage 1991, CAAD10, Yuba Mundo Lux, and a Cannondale Criterium Single Speed

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 343 Post(s)
Liked 292 Times in 205 Posts
Originally Posted by shelbyfv
Anything is possible but I wouldn't expect many choices with that budget.
maybe frame only?
Leinster is offline  
Likes For Leinster:
Old 09-11-21, 02:44 PM
  #4  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by shelbyfv
Anything is possible but I wouldn't expect many choices with that budget.
Yeah I've seen some that meet all of what I'm looking for in the price range except for size. Hard one to search though as it mostly turns up vintage steel bikes.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-11-21, 02:57 PM
  #5  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 4,261
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1971 Post(s)
Liked 1,297 Times in 629 Posts
Originally Posted by BikingViking793
Don't really want to modify an old bike.
Why not? If what you're after is the feel of the older bikes, the easiest way to nail that is to use an older bike as a base. Modern steel often uses wider tubing and ends up a lot stiffer.

In many cases it's not like you'd actually need much modification anyway. As long as you're not buying something really old, or that uses a bunch of French standards, adding brifters is unlikely to require much "modification" besides re-spacing the rear end.
HTupolev is offline  
Likes For HTupolev:
Old 09-11-21, 03:03 PM
  #6  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by HTupolev
Why not? If what you're after is the feel of the older bikes, the easiest way to nail that is to use an older bike as a base. Modern steel often uses wider tubing and ends up a lot stiffer.

In many cases it's not like you'd actually need much modification anyway. As long as you're not buying something really old, or that uses a bunch of French standards, adding brifters is unlikely to require much "modification" besides re-spacing the rear end.
It's a fall back if I can't find anything. But prefer not to. I think finding one with clearance for wide tires would be a challenge alone.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-11-21, 03:27 PM
  #7  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,390 Times in 4,148 Posts
Originally Posted by BikingViking793
My only real qualifications are steel frame, wider tires like 30mm+, endurance geometry, and indexed shifting drivetrain with brifters. I want to start searching the used market for one. Hoping for some suggestions of brand and model that I should be looking for. Thinking like a $500 budget.
At $500, I would not use any specifics besides 'steel' for your search. Keep the search as wide as possible at that price and go from there.
Don't even look for a specific size since if you look for '56cm', you may miss out on what someone calls 'M/L' or a 55cm that fits like the 56 you want due to geometry.


As for brands with modern steel frames...
jamis, kona, surly, all city, black mountain, fairlight, soma, mason, and many more.
mstateglfr is offline  
Likes For mstateglfr:
Old 09-11-21, 08:37 PM
  #8  
Leinster
Senior Member
 
Join Date: Jun 2013
Location: location location
Posts: 3,033

Bikes: MBK Super Mirage 1991, CAAD10, Yuba Mundo Lux, and a Cannondale Criterium Single Speed

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 343 Post(s)
Liked 292 Times in 205 Posts
Originally Posted by BikingViking793
It's a fall back if I can't find anything. But prefer not to. I think finding one with clearance for wide tires would be a challenge alone.
20c tires became a thing in the late 80s/early 90s, but outside of that era, tire clearance really shouldn’t be a problem. Even in the mid-80s you’d see bikes like Fignon’s with his Modolo calipers that could probably easily take a 30.
Leinster is offline  
Old 09-11-21, 09:37 PM
  #9  
biker128pedal
Senior Member
 
biker128pedal's Avatar
 
Join Date: Jan 2007
Location: Eastern VA
Posts: 1,702

Bikes: 2022 Fuel EX 8, 2021 Domane SL6, Black Beta (Nashbar frame), 2004 Trek 1000C for the trainer

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 260 Post(s)
Liked 443 Times in 262 Posts
Out of your budget but I keep looking back at Waterford made frame sets. I have all the parts from my old broke Madone but my carbon wheels are rim brake.

https://www.benscycle.com/milwaukee-...BoC8i4QAvD_BwE
biker128pedal is online now  
Old 09-12-21, 02:21 AM
  #10  
Lazyass
Senior Member
 
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,337
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 638 Times in 395 Posts
I was going to recommend the Soma Fog Cutter but then I saw your small $500 budget. Good luck with that. No one can tell you what to look for in used bikes, we have no clue what's for sale where you live.
Lazyass is offline  
Old 09-12-21, 06:00 AM
  #11  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by biker128pedal
Out of your budget but I keep looking back at Waterford made frame sets. I have all the parts from my old broke Madone but my carbon wheels are rim brake.

https://www.benscycle.com/milwaukee-...BoC8i4QAvD_BwE
yeah that seems like a fun option down the road. This is more of a budget option:

https://carsoncitybikeshop.com/priva...me-52cm-black/

for now I’m gonna stick to finding something used though.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Likes For BikingViking793:
Old 09-12-21, 08:03 AM
  #12  
johnnyace 
Le savonnier
 
johnnyace's Avatar
 
Join Date: Sep 2016
Location: Oregon
Posts: 1,706

Bikes: I can count 'em on one hand

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 729 Post(s)
Liked 597 Times in 269 Posts
Originally Posted by BikingViking793
yeah that seems like a fun option down the road. This is more of a budget option:

https://carsoncitybikeshop.com/priva...me-52cm-black/
A New Albion frameset would be a good option, either the Privateer, Homebrew, or Drake. I used to own a Homebrew that was pretty nice.
johnnyace is offline  
Old 09-12-21, 05:33 PM
  #13  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 4,261
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1971 Post(s)
Liked 1,297 Times in 629 Posts
Originally Posted by BikingViking793
I think finding one with clearance for wide tires would be a challenge alone.
If you're talking about modern gravel tires, sure. But in your OP, you wrote "30mm+." Tons of quality vintage steel road frames can fit that no problem, especially if you're looking at early 1980s and before.
HTupolev is offline  
Old 09-12-21, 05:48 PM
  #14  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by HTupolev
If you're talking about modern gravel tires, sure. But in your OP, you wrote "30mm+." Tons of quality vintage steel road frames can fit that no problem, especially if you're looking at early 1980s and before.
And those will all have quill stems. I know it can be done, just not really interested in changing a vintage bike.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-12-21, 05:58 PM
  #15  
HTupolev
Senior Member
 
Join Date: Apr 2015
Location: Seattle
Posts: 4,261
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1971 Post(s)
Liked 1,297 Times in 629 Posts
Originally Posted by BikingViking793
And those will all have quill stems.
Yes. I didn't realize that you'd have any issues with that.
HTupolev is offline  
Old 09-19-21, 08:05 PM
  #16  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Will a Surly Cross Check frameset work well for me? Thinking I like it a bit better than the New Albion and have a bike I could take most the parts from to build it up.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-20-21, 07:25 AM
  #17  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,390 Times in 4,148 Posts
Originally Posted by BikingViking793
Will a Surly Cross Check frameset work well for me? Thinking I like it a bit better than the New Albion and have a bike I could take most the parts from to build it up.
A new CC frameset costs more than your entire stated budget. And its hardly anything special in terms of design, features, butting, etc. But yeah, it can work fine if thats the geometry and style bike you want. It has canti posts, I would assume you know this but since you want a road bike(traditionally caliper brakes) I figured I will still mention that.
The CC geometry is definitely longer and lower than some other options, at least thats true at the larger end of the frame sizing.

You have had many bikes and presumably know what works well for geometry so I would guess you know if the CC geometry works in your frame size.
mstateglfr is offline  
Likes For mstateglfr:
Old 09-20-21, 01:25 PM
  #18  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
Originally Posted by BikingViking793
I've decided for my next bike I would like a modern road bike with a steel frame. I really like the ride of my vintage bikes, but miss my brifters and indexed shifting. Don't really want to modify an old bike. ...... Thinking like a $500 budget.
Really?

It seems from this post (and the half-dozen bikes in your info) that you have considerable experience cycling, and ridiculously unrealistic expectations. I had to go back and check that this wasn't a zombie post form ten or more years ago.

Except for big-box stores, I don't know anybody selling quality bikes (on par with what you already ride) for $500. You can get some decent but outmoded bikes from Bikes Direct, with either ancient 7-speed or 8-speed Claris, cheap, heavy wheels, cheap heavy seats and seat posts, etc ..... Stuff you probably wouldn't enjoy riding. And certainly nothing you would call "modern."
Maelochs is offline  
Old 09-20-21, 01:35 PM
  #19  
BikingViking793 
Senior Member
Thread Starter
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by Maelochs
Really?

It seems from this post (and the half-dozen bikes in your info) that you have considerable experience cycling, and ridiculously unrealistic expectations. I had to go back and check that this wasn't a zombie post form ten or more years ago.

Except for big-box stores, I don't know anybody selling quality bikes (on par with what you already ride) for $500. You can get some decent but outmoded bikes from Bikes Direct, with either ancient 7-speed or 8-speed Claris, cheap, heavy wheels, cheap heavy seats and seat posts, etc ..... Stuff you probably wouldn't enjoy riding. And certainly nothing you would call "modern."
I said used market. I’ve received the help I wanted and know a few more brands to look for.
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 09-20-21, 06:43 PM
  #20  
sanmi
Senior Member
 
Join Date: Jan 2015
Posts: 151
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by BikingViking793
I've seen some Jamis bikes that seem to meet what I'm looking for, but haven't seen one in my size.
I had a 2006 Jamis Quest. What a bike. Great ride. But no way it would fit 30mm tires. 25mm max.

I've converted several vintage frames. Huge project, even for one that seems simple, just because stuff always comes up that you don't expect. And likely not made easier given the current parts shortage. Fun stuff if you're into it but if not...

I think an older Surly is a decent idea. I don't know about pricing but you might get lucky with a ~10 year old model.

Good luck
sanmi is offline  
Likes For sanmi:
Old 09-21-21, 05:39 AM
  #21  
bleui
Senior Member
 
Join Date: Aug 2012
Posts: 459
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 2 Times in 2 Posts
if I may recommend a custom Ti from chinese factory, I got one for around $500 (frame only) been 3 years on it without any issues. But for the record the ride quality is a bit "harsher" than my vintage steel or my modern steel CX bike (with the same wheelset, tyre, and saddle/seatpost combo)
bleui is offline  
Likes For bleui:
Old 09-21-21, 07:52 AM
  #22  
ExPatTyke
Full Member
 
ExPatTyke's Avatar
 
Join Date: Jul 2016
Location: Weston-super-Mare, Somerset, UK
Posts: 433

Bikes: Gitane Course, Paris Sport, Peugeot AO8, Peugeot Bretagne, Peugeot Premiere 85, Peugeot Premiere 86, Peugeot ANC Halfords Team Replica, Peugeot Festina Team Replica, Motobecane Grand Sport, Motobecane Super 15, Raleigh Pro Race, Raleigh Stratos, BSA

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 427 Times in 90 Posts
A Thorn Audax frameset is around about your budget. I've seen a few of them on Audax and BCTC rides - they look very well made and the owners are always complimentary about them. They'll take tyres up to 35mm. The people who run Thorn are very good and they will ship overseas.
https://www.thorncycles.co.uk/bikes
ExPatTyke is offline  
Likes For ExPatTyke:
Old 09-21-21, 01:38 PM
  #23  
NitroExpress
Junior Member
 
Join Date: Aug 2017
Location: Memphis, TN
Posts: 81

Bikes: 1974 Mirella ~ Campy Record Group, 1985 Maruishi Mountain Ace 18, 1999 Waterford 2200, 2023 Poseidon X Ambition (with lots of upgrades)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Liked 38 Times in 23 Posts
Originally Posted by BikingViking793
I've decided for my next bike I would like a modern road bike with a steel frame. I really like the ride of my vintage bikes, but miss my brifters and indexed shifting. Don't really want to modify an old bike. My only real qualifications are steel frame, wider tires like 30mm+, endurance geometry, and indexed shifting drivetrain with brifters. I want to start searching the used market for one. Hoping for some suggestions of brand and model that I should be looking for. Thinking like a $500 budget. I've seen some Jamis bikes that seem to meet what I'm looking for, but haven't seen one in my size. I'm hoping there are other brands and models I should be looking for. Thanks in advance for any suggestions.
Check this out in the for sale section, in Wisconsin...'

1984 Klein Performance with your choice of components
NitroExpress is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.