Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

GCN video of interest!?mmmm

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

GCN video of interest!?mmmm

Old 03-07-21, 05:32 AM
  #1  
reissue59
Full Member
Thread Starter
 
Join Date: Dec 2014
Posts: 332
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 158 Times in 67 Posts
GCN video of interest!?mmmm

They should have come here before
https://youtu.be/hFT5IOtJWq0
reissue59 is offline  
Old 03-07-21, 08:34 AM
  #2  
Trakhak
Senior Member
 
Trakhak's Avatar
 
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,338
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2429 Post(s)
Liked 2,888 Times in 1,646 Posts
Originally Posted by reissue59
They should have come here before
https://youtu.be/hFT5IOtJWq0
Whichever GCN bright bulb came up with the idea of welding disk brake mounts on a conventional fork should go back to clown college. Disk brakes require a fork specifically designed to take the associated stresses. Otherwise, you turn the fork into a ticking time bomb:

Trakhak is offline  
Likes For Trakhak:
Old 03-07-21, 09:23 AM
  #3  
BradH
Catching Smallmouth
 
BradH's Avatar
 
Join Date: Oct 2013
Location: In a boat
Posts: 590

Bikes: 1990 Specialized Sirrus Triple, 1985 Trek 460, 2005 Lemond Tourmalet, 1984 Schwinn LeTour 'Luxe, 1988 Trek 400T, 1985 Trek 450, 1997 Lemond Zurich, 1993 Diamond Back Apex, 1988 Schwinn Circuit, 1988 Schwinn Prologue, 1978 Trek TX700, Sannino

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 88 Post(s)
Liked 131 Times in 78 Posts
I enjoy watching GCN but whenever they try to do anything with a vintage bike they miss the mark.
BradH is offline  
Old 03-07-21, 10:27 AM
  #4  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 20,323
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times in 1,974 Posts
Better title explainer-

Can basic engineering principles be ignored when modifying a frame to go with modern brake systems?

whoever did the mod should be forced to go to engineering school.

there are plenty of steel forks with disc mounts-
most often they have an extended plate that spans from the dropout to 3-5cm Above the top disc mount point. Not all attached continuously but definitely increases the mount span.
repechage is offline  
Old 03-07-21, 11:11 AM
  #5  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,274

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 150 Post(s)
Tagged: 1 Thread(s)
Quoted: 6147 Post(s)
Liked 4,093 Times in 2,325 Posts
Originally Posted by reissue59
They should have come here before
Oh, for truck’s sake! This dipwit could have made a very serviceable bike out of this one for a fraction of the effort. “But I’ve got to have disc brakes to be safe!” Horse apples, as my mother would have said. A set of dual pivot side pulls would have vastly improved the braking without all the questionable engineering. Hell, new brake pads would have improved the braking significantly. Were the wheels steel? Even if they weren’t, new wheels probably would have improved the ride.

And, frankly, a whole lot of people have ridden centuries on bikes exactly like that one or even worse. Kids!
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Likes For cyccommute:
Old 03-07-21, 12:06 PM
  #6  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,406

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times in 696 Posts
Did you watch?

The only thing that matters is that someone watched, and skipped an ad or two.
Unca_Sam is offline  
Old 03-07-21, 01:54 PM
  #7  
guy153
Senior Member
 
Join Date: Dec 2019
Posts: 950
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 261 Times in 212 Posts
I don't usually watch GCN because they're so noddy. But this has to be the peak of muppetry.

At least it wasn't a particularly nice old bike that they were ruining!


​​​
guy153 is offline  
Likes For guy153:
Old 03-07-21, 02:05 PM
  #8  
ramones71 
Newbie
 
Join Date: Mar 2008
Location: Minnesota
Posts: 70

Bikes: 1980 Raleigh Competition G.S., 1987 Schwinn Tempo, 1987 Schwinn Voyageur, 1982 Raleigh Superbe, 1983 Specialized Sequoia, 2002 Lemond Buenos Aires, 1998 Marin Eldridge Grade

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 27 Times in 16 Posts
Good Lord. I believe this dude is what is known in the Queen's English as a pillock. What happened to Jon?
ramones71 is offline  
Old 03-07-21, 08:51 PM
  #9  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 13,522

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,798 Times in 1,798 Posts
Yeah, GCN's Jon had an appreciation for retro and was open to learning new stuff about old tech when it turned out he was wrong in a video.

GCN has rarely done a proper comparison in their many retro vs contemporary videos. But at least those are harmless, entertaining and may pique the curiosity of younger viewers to give retro a try.

But modding an old fork this way is a big yikes.

And I hope they don't convince Manon to try this bike. Bad enough they haven't given her a fair shake in those recent super aero recumbent bike "tests." They should be doing time trials over 30-60 minutes, not sprints. And put some decent tires on that recumbent. Last time I checked the closeups, that super aero recumbent was hobbled with rigid, heavy Continental Sport Contact or similar tires best suited to puncture resistant touring and commuter rides. Meanwhile Simon is riding a tarted up full zoot aero TT bike with the best tires, over relatively short distance/duration rides.
canklecat is offline  
Old 03-07-21, 11:39 PM
  #10  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,393 Times in 4,148 Posts
Originally Posted by Trakhak
Disk brakes require a fork specifically designed to take the associated stresses. Otherwise, you turn the fork into a ticking time bomb:
I thought the left fork blade was just beefed with a thicker gauge.
mstateglfr is offline  
Old 03-08-21, 01:22 AM
  #11  
RiddleOfSteel
Master Parts Rearranger
 
RiddleOfSteel's Avatar
 
Join Date: Mar 2015
Location: Portlandia's Kuiper Belt, OR
Posts: 4,680

Bikes: 1982 Trek 720 - 1985 Trek 620 - 1984 Trek 620 - 1980 Trek 510 - Other luminaries past and present

Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1553 Post(s)
Liked 2,006 Times in 984 Posts
10/10 for a heretical build IMO, as I have put two different kinds of electronic shifting on a '74 Paramount (with great success!). I don't like the "OMG I need disc brakes to have the ultimate braking" thinking as it is 99% unnecessary. "I can't believe [the fun, beautiful, and quirky] Manon rode 100 miles on this!"" History is apparently completely lost on this guy. I mean, TdF from the '70s and earlier??? Tall gearing and everything. But hey, this is 'normie' fodder, and that I guess serves a purpose. I also dislike the term "retro bike" as it just doesn't sound right or complimentary. Classic or vintage, yes, but not retro. I agree with others here that an updated rim brake groupset (and wheels!) would have more than sufficed. Center pull calipers as "cantilevers"...well, I suppose I could show him a picture of my '85 Trek 620???

@canklecat I agree that GCN has failed to do a proper modern vs. vintage, at least in a mostly apples-to-apples comparison. Their first one with Matt and Si (Matt on the Battaglin) was really fun, but that's "vintage" GCN, back when I started watching it. Good times.

For those wondering, Jon (great guy) moved to a behind-the-scenes role with the GCN App development/implementation. He was always a guy for the vintage and modernized vintage rides like I and so many of us do.
RiddleOfSteel is offline  
Likes For RiddleOfSteel:
Old 03-08-21, 03:43 AM
  #12  
guy153
Senior Member
 
Join Date: Dec 2019
Posts: 950
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 261 Times in 212 Posts
Originally Posted by RiddleOfSteel

For those wondering, Jon (great guy) moved to a behind-the-scenes role with the GCN App development/implementation. He was always a guy for the vintage and modernized vintage rides like I and so many of us do.
I think that was about the time I moved to a not bothering to watch GCN role. Probably well-timed. Yes Jon was good.
guy153 is offline  
Likes For guy153:
Old 03-08-21, 07:58 AM
  #13  
gthomson
Senior Member
 
gthomson's Avatar
 
Join Date: May 2020
Location: Great White North
Posts: 1,213

Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 543 Post(s)
Liked 469 Times in 299 Posts
My question is why? guess the GCN crew are running out of ideas for content. If I really want the technology of a new bike, I'll buy a new bike.
I do like when a manufacturer produces a new bike with new new components but makes every thing still look retro but this doesn't make sense to me.
gthomson is offline  
Old 03-08-21, 08:07 AM
  #14  
Narhay
Senior Member
 
Narhay's Avatar
 
Join Date: Sep 2012
Location: Toronto, ON, Canada
Posts: 3,731
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 956 Post(s)
Liked 568 Times in 314 Posts
Every GCN vintage bike test: boy this bike I did nothing to maintain mechanically other than a surficial tidy up sure is a pig to ride! And yes, this one had me cringing. Why mod such a crap bike to begin with. Were those steel bars?
Narhay is offline  
Likes For Narhay:
Old 03-08-21, 01:25 PM
  #15  
icemilkcoffee 
Senior Member
 
icemilkcoffee's Avatar
 
Join Date: Aug 2009
Posts: 2,592
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1541 Post(s)
Liked 1,701 Times in 956 Posts
Originally Posted by Trakhak
Whichever GCN bright bulb came up with the idea of welding disk brake mounts on a conventional fork should go back to clown college. Disk brakes require a fork specifically designed to take the associated stresses. Otherwise, you turn the fork into a ticking time bomb:

Not to mention current disk brake bikes typically have through axles, so the brake doesn't wrest the wheel out of the drop-outs.
icemilkcoffee is online now  
Likes For icemilkcoffee:
Old 03-08-21, 03:42 PM
  #16  
Rocket-Sauce 
Port
 
Rocket-Sauce's Avatar
 
Join Date: Jan 2008
Location: Boston
Posts: 9,496

Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 1,803 Times in 1,037 Posts
Once again, we did it first -and better
https://www.bikeforums.net/classic-v...i-s-ergos.html

I SO wanted to like this video since the above thread is one of my favorite on these forums. But as soon as they decided to add disc brakes to make it "safer", I lost a lot of respect for GCN. The troubles with adding disc tabs to the fork are illustrated above, but the stays are just as bad. It was hard to see, but there were no reinforcing or bracing on the stays. Just a brake mount welded on.

There are tons of better examples of this done right in their own "bike vault".
Rocket-Sauce is offline  
Old 03-08-21, 04:54 PM
  #17  
genejockey 
Klaatu..Verata..Necktie?
 
genejockey's Avatar
 
Join Date: May 2007
Location: SF Bay Area
Posts: 17,662

Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10247 Post(s)
Liked 11,600 Times in 5,946 Posts
Originally Posted by Trakhak
Whichever GCN bright bulb came up with the idea of welding disk brake mounts on a conventional fork should go back to clown college. Disk brakes require a fork specifically designed to take the associated stresses. Otherwise, you turn the fork into a ticking time bomb:

Arguably, this picture belongs in the "Folding Bikes" forum.
__________________
"Don't take life so serious-it ain't nohow permanent."

"Everybody's gotta be somewhere." - Eccles
genejockey is offline  
Likes For genejockey:
Old 03-08-21, 05:06 PM
  #18  
guy153
Senior Member
 
Join Date: Dec 2019
Posts: 950
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 261 Times in 212 Posts
Originally Posted by icemilkcoffee
Not to mention current disk brake bikes typically have through axles, so the brake doesn't wrest the wheel out of the drop-outs.
They brazed on thru-axle dropouts. Or rather his framebuilder "mate" did who "just happened to live round the corner". There was some earlier footage of the GCN guy apparently attacking the seatstays with what looked like a stick welder but I think it was all just for show.

Maybe they actually did replace the fork and glossed over that part. Let's hope so if they now send the rather gormless girl off on a 100 mile ride on the thing to see how awful it is (apart from the wonderful modern components of course).
guy153 is offline  
Old 03-08-21, 06:37 PM
  #19  
base2 
I am potato.
 
base2's Avatar
 
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,073

Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,578 Times in 910 Posts
I too, am curious about the fork.

A thick welding bead run up the backside of the fork leg from the dropout to several inches above the upper caliper post mount would do a lot & be subtle when doing so. It also wouldn't be a big deal to get a prefab mount from Paragon or Framebuilder Supply then fashion a reaction arm out of ¼ inch plate steel to spread the load half way up & then limit it to a 160mm rotor or whatever to keep the brake torque at a sensible level.

Something similar to this:
Disc tab with reaction arm by Richard Mozzarella, on Flickr

The video really offers no clear shot of the front brake tab & in fact I'd venture a guess all the camera angles are suspiciously chosen to obscure the front brake work all together.

You can do a lot with old steel. I have an all Ultegra 6800, modern 1&⅛ straight steerer carbon fork with extended rear dropouts & relocated stay braces & canti brakes on a '74 Schwinn Varsity. A lathe, a welder, some time with a brazing torch...It's just time, really.
20190105_133655 by Richard Mozzarella, on Flickr

Last edited by base2; 03-08-21 at 06:52 PM.
base2 is online now  
Likes For base2:
Old 03-09-21, 07:47 AM
  #20  
Ed Wiser
Full Member
 
Join Date: Jul 2020
Posts: 381
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 130 Times in 79 Posts
I can see the drive train upgrade but the whole disc brake upgrade. Is way above a “Normal” cyclist ability. An really is not needed.
Ed Wiser is offline  
Old 03-09-21, 08:36 AM
  #21  
acm
Senior Member
 
acm's Avatar
 
Join Date: May 2019
Location: Rochester, NY
Posts: 59

Bikes: '84 Centurion Pro Tour 15; '97 Cannondale M900

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 38 Times in 20 Posts
I've enjoyed a lot of GCN videos, but people are quick to forget that its primary purpose is a content mill designed to sell power meters to divorce guys. Basically every "retro" product comparison they do is just marketing material designed to show the 'superiority' of modern components. "If you buy this, you'll be faster!"
acm is offline  
Likes For acm:
Old 03-09-21, 11:58 AM
  #22  
gthomson
Senior Member
 
gthomson's Avatar
 
Join Date: May 2020
Location: Great White North
Posts: 1,213

Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 543 Post(s)
Liked 469 Times in 299 Posts
Not related to the topic of the video above, I do enjoy watching their videos for entertainment value at least. The weekly GCN show is light hearted and funny to watch and I like the dynamics between Si and Dan as they recall their glory days as pro racers. I also like the challenge rides they do, or some of the experiments like the Velo recumbent ride that Manon was in. It gives me something to watch when I Zwift but don't really feel like joining a group ride or race.

Last edited by gthomson; 03-09-21 at 01:50 PM.
gthomson is offline  
Likes For gthomson:
Old 03-09-21, 02:52 PM
  #23  
Bianchi84
Senior Member
 
Bianchi84's Avatar
 
Join Date: Feb 2017
Location: Concord, NC
Posts: 693

Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 233 Post(s)
Liked 346 Times in 187 Posts
Originally Posted by guy153
They brazed on thru-axle dropouts. Or rather his framebuilder "mate" did who "just happened to live round the corner". There was some earlier footage of the GCN guy apparently attacking the seatstays with what looked like a stick welder but I think it was all just for show.

Maybe they actually did replace the fork and glossed over that part. Let's hope so if they now send the rather gormless girl off on a 100 mile ride on the thing to see how awful it is (apart from the wonderful modern components of course).
"...gormless girl..." ? Isn't that a little harsh?
Bianchi84 is offline  
Likes For Bianchi84:
Old 03-10-21, 03:15 AM
  #24  
guy153
Senior Member
 
Join Date: Dec 2019
Posts: 950
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 261 Times in 212 Posts
Originally Posted by Bianchi84
"...gormless girl..." ? Isn't that a little harsh?
Yes. Especially as she is one of the best presenters. I saw an episode in which she painted a frame which was actually pretty good. So I apologize for calling her gormless.
guy153 is offline  
Old 03-10-21, 03:20 AM
  #25  
guy153
Senior Member
 
Join Date: Dec 2019
Posts: 950
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 321 Post(s)
Liked 261 Times in 212 Posts
Originally Posted by Rocket-Sauce
Once again, we did it first -and better
https://www.bikeforums.net/classic-v...i-s-ergos.html

I SO wanted to like this video since the above thread is one of my favorite on these forums. But as soon as they decided to add disc brakes to make it "safer", I lost a lot of respect for GCN. The troubles with adding disc tabs to the fork are illustrated above, but the stays are just as bad. It was hard to see, but there were no reinforcing or bracing on the stays. Just a brake mount welded on.

There are tons of better examples of this done right in their own "bike vault".
Didn't they put on a whole extended dropout that includes the brake tabs? This is a safe way to do it. The dropout curiously looked like one from Paragon Machine Works so it may be that his "mate around the corner" was actually in the US. Here in the UK we get most of those things from Ceeway and I'm not sure they carry that kind.

The whole thing was about as genuine as a £2 note.

If it was actually an interesting bike show they would make some kind of a jig to test where the fork will fail (not send their best presenter off on a 100 mile ride to see if she dies).

The dropouts are these possibly:

https://www.paragonmachineworks.com/...low-mount.html




Here's a frame from the video.

Last edited by guy153; 03-10-21 at 03:34 AM.
guy153 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.