Specialized stem ID
#1
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
Specialized stem ID
So the MB-1 came with a pretty cool Big S stem/bar combo.
They may get moved to a Stumpy if I don't go with bullmoose which is what this would probably get if I do move them.
Pretty sure they are a set and maybe a bit rare as I cannot find another example anywhere yet.
The serrations on the bar match the stem and are not the same as a Slingshot stem and X-2+2 bars, these are narrower.
The bars are stamped Specialized X-1+2, the stem is stamped on the quill S P with a dot in the middle.
Guess they are identified but would like to know what they were used on and when since we already know about bullmoose, putterhead and slingshot, never seen these.
They may get moved to a Stumpy if I don't go with bullmoose which is what this would probably get if I do move them.
Pretty sure they are a set and maybe a bit rare as I cannot find another example anywhere yet.
The serrations on the bar match the stem and are not the same as a Slingshot stem and X-2+2 bars, these are narrower.
The bars are stamped Specialized X-1+2, the stem is stamped on the quill S P with a dot in the middle.
Guess they are identified but would like to know what they were used on and when since we already know about bullmoose, putterhead and slingshot, never seen these.
Likes For merziac:
#2
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
Help?
#3
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,193
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,295 Times
in
865 Posts
The S P might be only a date code.
Likes For dddd:
#4
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
#5
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,262
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,336 Times
in
2,176 Posts
-----
am ignorant of these Sinyard stem/bar products
wondering if Nitto be the vendor?
-----
am ignorant of these Sinyard stem/bar products
wondering if Nitto be the vendor?
-----
#6
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
#7
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
#8
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
Turns out there are no serrations and there maybe other bars that would work with it but any bar with a raised area for a regular stem would look bad and may not fit either.
Still doesn't tell us much if anything about what they may have came on.
#9
Senior Member
100% sure that's a Nitto product. Spec's bars in those days were frequently rebranded/made by Nitto. The giveaway is the quill/wedge, as well as the forging of the extension (look at a Nitto Dirt Drop) which is a perfect match for the contemporary products made by Nitto.
Likes For wschruba:
#10
Senior Member
Thread Starter
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
100% sure that's a Nitto product. Spec's bars in those days were frequently rebranded/made by Nitto. The giveaway is the quill/wedge, as well as the forging of the extension (look at a Nitto Dirt Drop) which is a perfect match for the contemporary products made by Nitto.
Seems very odd to me that no other examples can be found and no one else so far has ever seen them either.
Maybe these are the only ones ever made and I hit the jackpot.
#11
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,524
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
That same combo has sold on ebay several times, but not recently. They tend to bring $100 or more.
__________________
Please don't confuse ebay "asking" prices with "selling" prices. Many sellers never get their ask price. some are far from it. Value is determined once an item actually SELLS. Its easy enough to check SOLD prices.
Please don't confuse ebay "asking" prices with "selling" prices. Many sellers never get their ask price. some are far from it. Value is determined once an item actually SELLS. Its easy enough to check SOLD prices.
#12
2k miles from the midwest
Join Date: Feb 2005
Location: Washington
Posts: 1,964
Bikes: ~'75 Colin Laing, '80s Schwinn SuperSport 650b, ex-Backroads ti project...
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 525 Post(s)
Liked 931 Times
in
446 Posts
I have a couple of those Spesh X1 bars somewhere that were attached to cast alloy SR "slingshot" stems, but I haven't seen that X1+2 before.