Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Campagnolo Chorus 8 speed?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Campagnolo Chorus 8 speed?

Old 05-23-22, 03:56 PM
  #1  
strichzwei
Newbie
Thread Starter
 
Join Date: Oct 2021
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 5 Posts
Campagnolo Chorus 8 speed?

I recently purchased a davidson frame with what I think are 8 speed campagnolo "chorus" shifters and derailleurs, no wheel set. I would like to buy a wheel set and cassette to build this bike up but need to make sure of what I have.

I am not yet allowed to post pictures (too few posts), so can someone let me know how to identify what I have, are there serial or model numbers on the components that help identify what I have?

Thanks,
Scott

Last edited by strichzwei; 05-23-22 at 04:04 PM.
strichzwei is offline  
Old 05-23-22, 07:34 PM
  #2  
Spaghetti Legs 
Senior Member
 
Join Date: Dec 2014
Location: Central Virginia
Posts: 5,085

Bikes: Numerous

Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1672 Post(s)
Liked 3,034 Times in 904 Posts
If there’s a question of 8 speed, just take the right shifter and click all the way through, you should get 7 clicks. Campy 8 speed is my favorite for all around looks, reliability, and ease of set up. The only downside is if you do a lot of climbing, you’re limited to 53-39 and 13-26 for stock gearing. There are some tricks to getting the right cassettes, but in general avoid the pre Exa drive, which will have each cog individually lettered A-H.

https://branfordbike.com/new-page-1

Another good resource for helping to identify old parts

https://velobase.com/ViewBrand.aspx?...6-f75628ea75e7
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur

Spaghetti Legs is offline  
Likes For Spaghetti Legs:
Old 05-24-22, 04:34 AM
  #3  
kunsunoke 
spondylitis.org
 
kunsunoke's Avatar
 
Join Date: Mar 2013
Location: Fleetwood, PA, USA
Posts: 1,016

Bikes: '84 Colnago Super; '90 Bridgestone MB-1; '81 Trek 930; '01 Cinelli Supercorsa; '62 Ideor Asso; '87 Tommasini Super Prestige; '13 Lynskey R2300; '84 Serotta Nova Special; '94 Litespeed Catalyst; etc.

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 97 Times in 63 Posts
It's possible to run a Shimano 7+1 cassette setup (e.g. a standard Shimano 7-speed cassette cluster, plus one additional cog with 7-speed spacing) if you have an 8-9-10 speed compatible freehub body. The spacing will be identical to that of an eight-speed Campagnolo cassette, and you'll get better shifting with the Ergopower 8-speed shifters.

I've got that setup on two of my bikes.
kunsunoke is offline  
Old 05-24-22, 05:18 AM
  #4  
P!N20
Senior Member
 
P!N20's Avatar
 
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,452
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 1,882 Times in 924 Posts
Originally Posted by strichzwei
I recently purchased a davidson frame with what I think are 8 speed campagnolo "chorus" shifters and derailleurs
So are we talking Ergo levers/brifters like these?



Or down tube shifters like these?



The Chorus Ergo levers usually have 'Chorus' printed on the lever arm, if they don't they could be Record.

Chorus downtube shifters don't really exist, they were either Record or Veloce. (Although Velobase does list a graphite Chorus downtube shifter set.)

Also check the rear dropout spacing as 7 speed is 126mm while 8 speed is 130mm.

Campy 8 speed rear derailleur models all look quite similar. From about 1995? they started printing the model names on their components.

Last edited by P!N20; 05-24-22 at 05:21 AM.
P!N20 is offline  
Old 05-24-22, 06:11 AM
  #5  
T-Mar
Senior Member
 
Join Date: Nov 2004
Posts: 23,233
Mentioned: 652 Post(s)
Tagged: 1 Thread(s)
Quoted: 4719 Post(s)
Likes: 0
Liked 3,034 Times in 1,874 Posts
The combination of an exposed P-pivot bolt and a fixed, slant parallelogram of the rear derailleur, would make it very early 1990s and 8 speed compatible. Based on the solid cage section for the jocket pulley, it would appear to be 1992 Athena. Photo assist...


T-Mar is offline  
Old 05-24-22, 01:37 PM
  #6  
strichzwei
Newbie
Thread Starter
 
Join Date: Oct 2021
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 5 Posts
Oh wow, I wasn't expecting so much feedback without pictures thanks guys!
And then, T-Mar was able to post my pictures somehow, whaaat?! thanks!
Really appreciate all the help!
Scott
strichzwei is offline  
Old 05-24-22, 02:39 PM
  #7  
P!N20
Senior Member
 
P!N20's Avatar
 
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,452
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 1,882 Times in 924 Posts
Levers are Record, 1st gen Ergopower: https://velobase.com/ViewComponent.a...m=125&AbsPos=4
P!N20 is offline  
Old 05-25-22, 12:51 AM
  #8  
billytwosheds 
Senior Member
 
billytwosheds's Avatar
 
Join Date: Aug 2015
Location: Kingdom of Hawai'i
Posts: 1,289

Bikes: Peugeot, Legnano, Fuji, Zunow, De Rosa, Miyata, Bianchi, Pinarello, Specialized, Bridgestone, Cinelli, Merckx

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 428 Post(s)
Liked 464 Times in 213 Posts
And looks like the return spring on the shift lever is broken.
billytwosheds is offline  
Likes For billytwosheds:
Old 05-26-22, 07:58 AM
  #9  
strichzwei
Newbie
Thread Starter
 
Join Date: Oct 2021
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 5 Posts
You guys are reeaaally good.
Someone mentioned to me that parts to repair that spring may be NLA.
Is that true?
strichzwei is offline  
Old 05-26-22, 11:58 AM
  #10  
Dave Mayer
Senior Member
 
Dave Mayer's Avatar
 
Join Date: Dec 2006
Posts: 2,490
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1359 Post(s)
Liked 463 Times in 273 Posts
I've been riding some Campy Record 8-speed Ergopower shifters for the last week or so on a Vitus 979. Bike rides great and the shifting is flawless. Campagnolo totally had their act together by 1994 with this gear.

Your shifters may be a couple of years earlier, due to the alloy shifter bodies, but they should work great as well, when combined with the matching derailleur, and new cables/housing and expert setup. This assumes that your G-springs are not worn out, or spring carriers broken, or the bodies were not cracked in some kind of collision. If these shifters were used as they should have been used, then there is a high probability that the G-springs are kaput, as they are good for maybe 15k of riding. BTW: your rear derailleur will struggle to handle a 28 tooth rear cog, as they were made for racing blocks. And make sure you use correct Campagnolo-compatible cables with the smaller heads, to avoid them jamming in the shifters and causing all kinds of extraction misery and profanities when you try and replace them.

As far as the broken paddle spring- I've taken apart many Ergopower shifters and never seen this problem. Parts? Nope; your likely only avenue is to tear apart and scavenge off of another right shifter.

I love 8-speed Ergopower, but my sober advice is to go with something newer, unless you have some high degree of sentimental value with this kit. 11-speed Centaur is great stuff, if your frame can handle it.
Dave Mayer is offline  
Old 05-27-22, 11:14 AM
  #11  
strichzwei
Newbie
Thread Starter
 
Join Date: Oct 2021
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 5 Posts
Well Dave Mayer, thanks for sobering me up. That is really the advice I wanted, I was concerned with one frustration after the next. I will give davidson (impulse) a call and ask him what that frame will handle.

thanks guys!

Scott
strichzwei is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.