Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

The ultimate 27" tire reference thread!

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

The ultimate 27" tire reference thread!

Old 10-06-21, 07:07 AM
  #276  
macstuff 
Full Member
 
Join Date: Jun 2021
Location: Des Moines, Iowa
Posts: 249

Bikes: A Blue One and 2 Green One's, then there's the Yellow one. And oh, yeah, a Black One. Did I mention the Red One?

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 75 Post(s)
Liked 182 Times in 79 Posts
I've got two bikes that still have 27" inches on them and I noticed the short supply and the size being squeezed out a few years ago. I bought four pairs, all different and haven't gone through set yet.

Schwalbe puncture resistant w/ reflective strip - About 300 miles on them and all the center flashing isn't gone yet. The compound is very soft to the touch but they wear very slowly
Pasela Pro-tite - in the wings
Pasela regulars - in the wings
Michelin World Tour - About 500 miles on them and still look newish. These won't inflate past 65lbs on non hooked rims without spitting off the rim. Probably the rims fault though, and me for matching them up.

Im not very demanding of my tires. I look for the smoothest path always. The streets in Tucson are another story but I avoid most of the bigger holes.
I found the Michelins in England and the others here in the USA on Ebay. I think I bought them all in 2019.
By the looks of it, there will be a couple pairs of Paselas at my Estate Sale.... stand by.....
macstuff is offline  
Old 10-08-21, 02:40 AM
  #277  
tommymc
Newbie
 
Join Date: Sep 2012
Location: Central Florida
Posts: 73

Bikes: Many, mostly old & low tech

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Liked 20 Times in 11 Posts
Western Bikeworks, www.westernbikeworks.com, has Schwalbe HS159 27 X 1-1/4 gumwalls at $19.99 ($16.99 each when I put 2 into the basket). With puncture protection and real tread they look like great commuter or pathway tires.
tommymc is offline  
Likes For tommymc:
Old 10-10-21, 08:54 PM
  #278  
sunburst
Senior Member
 
sunburst's Avatar
 
Join Date: Jan 2008
Location: SF Bay Area
Posts: 1,759

Bikes: Giant, Peugeots, Motobecanes, Kona, Specialized, Bike Friday, Ironhorse, Royal Scot, Schwinns

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 185 Post(s)
Liked 96 Times in 51 Posts
Originally Posted by tommymc
Western Bikeworks, www.westernbikeworks.com, has Schwalbe HS159 27 X 1-1/4 gumwalls at $19.99 ($16.99 each when I put 2 into the basket). With puncture protection and real tread they look like great commuter or pathway tires.
Thx for the pointer. I just picked up a pair, with some tubes. My favorite 27" tire. I've bought 3 pair in the past for 3 vintage restorations. Noticeably lighter than the Marathons in the same size, and feel like it too, although a Schwalbe guy at Sea Otter said the Marathon had lower rolling resistance. To me, the 159's feel better.
sunburst is offline  
Old 10-13-21, 09:59 AM
  #279  
machinist42
mycocyclist
 
machinist42's Avatar
 
Join Date: Dec 2016
Location: Monkey Junction, Wilmington, NC
Posts: 2,239

Bikes: 1964 Schwinn Paramount P-13 DeLuxe, 1964 Schwinn Sport Super Sport, 1972 Falcon San Remo, 1974 Maserati MT-1, 1974 Raleigh International, 1984 Lotus Odyssey, 198? Rossin Ghibli, 1990 LeMond Le Vanquer (sic), 1991 Specialized Allez Transition Pro, +

Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 901 Post(s)
Liked 802 Times in 441 Posts
Happy Wednesday the 13th!

SwiftTire's Sand Canyon 27 x 1 3/8 Tan Wall are back in stock!

"Description

The original SwiftTire! Now in Tan for a more vintage feel.

  • 27 x 1 3/8
  • 66 TPI
  • 350 grams
  • 35-80 PSI
  • Tan sidewalls
  • Folding Kevlar bead
  • 33 mm width on common 630 rims
  • Made in Japan by Panaracer exclusively for us
A SwiftTire balanced for both on and off road adventures. Features a chevron tread pattern, which when combined with our premium Panaracer casing makes for a top shelf tire at mid-level pricing. For hooked-edge / beaded rims. For those who loved the Michelin World Tour, this is the tire for you!"



(Price has inflated 20%, to $36, but where else are you going to find a 350 g folding Kevlar beaded 27" tire with a tan wall?

I ordered a pair already.

(I have been refreshing their page for years, literally years, waiting for these to present and an hour or so ago they did. I have no personal experience with them, but they are attractive on paper? I somehow don't think they will be in stock for very long?))

Last edited by machinist42; 10-13-21 at 11:05 AM. Reason: Added Picture, because it did happen.
machinist42 is offline  
Likes For machinist42:
Old 10-13-21, 12:18 PM
  #280  
dddd
Ride, Wrench, Swap, Race
 
dddd's Avatar
 
Join Date: Jan 2010
Location: Northern California
Posts: 9,171

Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.

Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1554 Post(s)
Liked 1,274 Times in 846 Posts
I suspect these are based on the same casing size as the 1-1/4 Pasela, which measures huge compared to other 1-1/4" tires.

The World Tour is of course similarly huge (though is heavy, sluggish and stiff at least compared to most skin-side tires).

I get good tread mileage from Panaracer tires of this type, Pasela et al.
dddd is offline  
Old 10-13-21, 03:05 PM
  #281  
dmark 
Senior Member
 
Join Date: Oct 2017
Location: NJ
Posts: 647

Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 203 Times in 141 Posts
Originally Posted by tommymc
Western Bikeworks, www.westernbikeworks.com, has Schwalbe HS159 27 X 1-1/4 gumwalls at $19.99 ($16.99 each when I put 2 into the basket). With puncture protection and real tread they look like great commuter or pathway tires.
Thanks! 15.99 free ship with 4 tires.
__________________
Last new bike 1991
dmark is offline  
Old 10-16-21, 01:04 PM
  #282  
evwxxx
FalconLvr
 
Join Date: Jun 2006
Location: SW Virginia
Posts: 1,364

Bikes: 62 Falcon, 58 Raleigh Lenton Gran Prix, 74 Raleigh Pro, 75 Raleigh Int, 75 Raleigh Comp, 76 Colnago Super, 75 Crescent, 80 Peugeot PX10, plus others too numerous to mention!

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Liked 104 Times in 64 Posts
Western bikeworks now only has 3 gumwall schwalbes left in stock! Hopefully they will get more in,,,

Last edited by evwxxx; 10-16-21 at 01:05 PM. Reason: Add
evwxxx is offline  
Old 10-16-21, 01:07 PM
  #283  
dddd
Ride, Wrench, Swap, Race
 
dddd's Avatar
 
Join Date: Jan 2010
Location: Northern California
Posts: 9,171

Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.

Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1554 Post(s)
Liked 1,274 Times in 846 Posts
Blueskycycling has HS159's in white or gum for $20 today. Plus tax/shipping.
dddd is offline  
Old 10-18-21, 02:41 PM
  #284  
squirtdad
Senior Member
 
squirtdad's Avatar
 
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,856

Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque

Mentioned: 104 Post(s)
Tagged: 0 Thread(s)
Quoted: 2304 Post(s)
Liked 2,741 Times in 1,499 Posts
Originally Posted by dddd
I suspect these are based on the same casing size as the 1-1/4 Pasela, which measures huge compared to other 1-1/4" tires.

The World Tour is of course similarly huge (though is heavy, sluggish and stiff at least compared to most skin-side tires).

I get good tread mileage from Panaracer tires of this type, Pasela et al.
this is good to know, I was wondering at how big my Paselas were be cause they looked bigger than 1 1/4. they are pretty sluggish, especially compared to 28mm gravel king
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)



squirtdad is offline  
Old 11-08-21, 02:58 PM
  #285  
ramzilla
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
I just ordered a pair of these Pasela Panaracer Urban Max 27" tires. Hope they roll as fast as they claim.

https://www.thebikesmiths.com/collec...panaracer-3319
ramzilla is offline  
Old 11-08-21, 03:27 PM
  #286  
dddd
Ride, Wrench, Swap, Race
 
dddd's Avatar
 
Join Date: Jan 2010
Location: Northern California
Posts: 9,171

Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.

Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1554 Post(s)
Liked 1,274 Times in 846 Posts
Originally Posted by ramzilla
I just ordered a pair of these Pasela Panaracer Urban Max 27" tires. Hope they roll as fast as they claim.

https://www.thebikesmiths.com/collec...panaracer-3319
Are there any actual claims about it's rolling performance?

It's a ruggedized tire for urban use, so there will be some layers of added material under the tread cap, but Paselas typically leave the sidewalls thin, to flex easier.
dddd is offline  
Old 11-09-21, 02:05 PM
  #287  
halb 
Newbie
 
Join Date: Jan 2020
Location: eastern CT
Posts: 46

Bikes: yes

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 10 Times in 10 Posts
Velomine has Vittoria Randos in 700x28 for $16.99. 4 in stock.
halb is offline  
Old 11-09-21, 02:09 PM
  #288  
halb 
Newbie
 
Join Date: Jan 2020
Location: eastern CT
Posts: 46

Bikes: yes

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 10 Times in 10 Posts
Oops! Not 27's
halb is offline  
Old 11-18-21, 08:46 AM
  #289  
Sactown_Albert 
Full Member
 
Sactown_Albert's Avatar
 
Join Date: Sep 2020
Location: Sacramento, CA
Posts: 419

Bikes: 2017 Sage Skyline, 2015 Co-Motion Periscope Tandem, 2012 Soma Smoothie, 2006 Kona Jake, 1986 Miyata Nine Twelve, 1977 Peugeot UO18c, 1977 Peugeot PRN10, 1974 Allegro Schweitzermeister Model 76, 1972 Hugo Rickert Spezial

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Liked 580 Times in 186 Posts
I buy regularly from Bike Tires Direct and they are a good and long established online vendor. They have a good rewards program, too for repeat customers.
Sactown_Albert is offline  
Likes For Sactown_Albert:
Old 11-24-21, 07:16 AM
  #290  
Panurgist
Newbie
 
Join Date: Sep 2011
Location: Richmond, Va
Posts: 9

Bikes: Rivendell Sam Hillborne, Peugeot UO8, Trek 820, Motobecane Grand Record + projects

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I have a set of the Swift Tires ( black wall ). They measure 30mm at 45psi on VERY narrow rims. That works out to just a bit under 1 1/4" . The O.D. on these rims is 20mm sooo maybe 18mm I.D. ? The cheap 1 1/4 tires I took off were measuring around 27mm. I'm sure they would be plumper on normal rims.
I am very happy with them. Smooth, fast, and enough tread to last a while. Definite step up from the Chin Shens they replaced.
Panurgist is offline  
Old 11-26-21, 09:02 PM
  #291  
dddd
Ride, Wrench, Swap, Race
 
dddd's Avatar
 
Join Date: Jan 2010
Location: Northern California
Posts: 9,171

Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.

Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1554 Post(s)
Liked 1,274 Times in 846 Posts
Originally Posted by Panurgist
I have a set of the Swift Tires ( black wall ). They measure 30mm at 45psi on VERY narrow rims. That works out to just a bit under 1 1/4" . The O.D. on these rims is 20mm sooo maybe 18mm I.D. ? The cheap 1 1/4 tires I took off were measuring around 27mm. I'm sure they would be plumper on normal rims.
I am very happy with them. Smooth, fast, and enough tread to last a while. Definite step up from the Chin Shens they replaced.
There's going to be about 6-7mm difference between the outer and inner width dimensions, so your 20mm wide rims will probably measure i13mm, which is very near the lower limit of what is possible to mount tires on and have the tube and valve stem fill the space between the rim sidewalls and tire beads.

Back in the 70's, it wasn't possible to make a wider rim without some serious weight gain. Later design development allowed deeper and wider rims extruded with much thinner walls and of stronger alloys like Maxtal, and which defines today's state-of-the-art alloy rims.

30mm (as mounted) tires on such narrow rims invites the possibility of the tube suffering stretching stress concentration as the pressure tries to push the tube down between the tire beads after the tube has already firmed up and started to pin the tube against the inside of the tire. The rubber reinforcing pad surrounding the valve stem, in particular, may not fully descend to the floor of the rim and so may cause tube wall ruptures to either side of said rubber reinforcement (look for tell-tale stretch marks to either side of the rubber valve stem reinforcement).
It is helpful with such combinations of wide tires on narrow rims to tug on the valve stem as the tire is being inflated past 5psi, to prevent such tube ruptures.
It is also helpful to use only tubes having generous width relative to the tire width.

Last edited by dddd; 11-26-21 at 09:07 PM.
dddd is offline  
Old 11-27-21, 10:09 AM
  #292  
Panurgist
Newbie
 
Join Date: Sep 2011
Location: Richmond, Va
Posts: 9

Bikes: Rivendell Sam Hillborne, Peugeot UO8, Trek 820, Motobecane Grand Record + projects

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by dddd
There's going to be about 6-7mm difference between the outer and inner width dimensions, so your 20mm wide rims will probably measure i13mm, which is very near the lower limit of what is possible to mount tires on and have the tube and valve stem fill the space between the rim sidewalls and tire beads.

Back in the 70's, it wasn't possible to make a wider rim without some serious weight gain. Later design development allowed deeper and wider rims extruded with much thinner walls and of stronger alloys like Maxtal, and which defines today's state-of-the-art alloy rims.

30mm (as mounted) tires on such narrow rims invites the possibility of the tube suffering stretching stress concentration as the pressure tries to push the tube down between the tire beads after the tube has already firmed up and started to pin the tube against the inside of the tire. The rubber reinforcing pad surrounding the valve stem, in particular, may not fully descend to the floor of the rim and so may cause tube wall ruptures to either side of said rubber reinforcement (look for tell-tale stretch marks to either side of the rubber valve stem reinforcement).
It is helpful with such combinations of wide tires on narrow rims to tug on the valve stem as the tire is being inflated past 5psi, to prevent such tube ruptures.
It is also helpful to use only tubes having generous width relative to the tire width.
Thanks, good info.
I'll un-mount the tires and check it out. They are presta valves ( there isn't anywhere near enough room for schrader )
I bought this bike as a frame and fork project ( a Raleigh Super Course ) and I wanted aluminum rims for better braking, these were all I could find locally at the time.
Panurgist is offline  
Old 12-10-21, 01:09 PM
  #293  
sd5782 
Senior Member
 
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,501

Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others

Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 577 Post(s)
Liked 686 Times in 385 Posts
In praise of the Kendas

I’m just a low performance biker in the Midwest, but the cheap Kenda K35s do have a place for me. They were what I have used on my old 73 Super Sport for decades. I got a bit more involved in the next rung up of vintage bikes in the last 5-10 years. That put me onto some Panaracer Paselas and Gravel Kings. Nothing pricey, but a notch up.

Anyhow, after updating my old Schwinn including a new crank spider so I could change the front chainrings, I also updated to Paselas. They are the standard 1 1/4” ones and not Pro Tite with the added flat protection. They really transformed the feel and rode nicely except….. City riding here in the Midwest with the poor pavement and patches and cracks was terrible on that bike. I think the frame is quite stiff and has fairly sporty angles. I found myself watching for the tiniest road imperfections.

Back to the Kendas on my SS upright conversion and my 73 stocker and city riding on poor roads is quite tolerable. The Kendas on an upright conversion of a 72 Schwinn Continental was pleasing too. On that bike, one could practically ignore the road surface. Today I did a 15 mile shakedown ride with half being on so so roads on my recent Peugeot UO14 acquisition. The bike had a pleasant neutral feel with the Kendas and the tires and bike complemented each other for the conditions.

Obviously nicer tires for nicer roads equal nicer feel, but there is something to be said for a decent ride over poorer pavement. Other thicker tires would certainly give similar results, but this is my experience. All areas of the country aren’t blessed with fine pavement, especially in the heavier traveled cities.
sd5782 is offline  
Old 01-08-22, 07:02 PM
  #294  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,674

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
I just mounted a Swift Tire Sand Canyon on a Rigida 13-20 for my Motobecane and inflated to 55 psi, it measures 1 1/8. I wonder what the OG Michelin Elan measured on these rims.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Old 01-08-22, 07:42 PM
  #295  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by Classtime
I just mounted a Swift Tire Sand Canyon on a Rigida 13-20 for my Motobecane and inflated to 55 psi, it measures 1 1/8. I wonder what the OG Michelin Elan measured on these rims.
In fairness to the tires, those are really skinny rims. Panaracer Pasela 27"x1-1/4" tires measure an honest-to-goodness 32mm on the original wide steel rims on my wife's Schwinn Suburban. I bet your tires would measure closer to the labelling on wider rims, too!
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 01-08-22, 08:01 PM
  #296  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,674

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Originally Posted by ThermionicScott
In fairness to the tires, those are really skinny rims. Panaracer Pasela 27"x1-1/4" tires measure an honest-to-goodness 32mm on the original wide steel rims on my wife's Schwinn Suburban. I bet your tires would measure closer to the labelling on wider rims, too!
I'm actually pleased that they mounted a might narrower. I was looking for Folding 1 1/4 Paselas and they weren't to be found. These rims are what came with the 1978 Grand Jubile -- a tourer?

edit: at 60 psi or less and my 155 lbs. on these rims results in a less than ideal cross section. At 80 psi, they are still very comfortable and more round.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.

Last edited by Classtime; 01-09-22 at 03:42 PM.
Classtime is offline  
Likes For Classtime:
Old 01-10-22, 10:23 AM
  #297  
Genghis Kant
Newbie
 
Join Date: Dec 2021
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Thanks for the info!
Genghis Kant is offline  
Old 01-10-22, 11:03 AM
  #298  
dantonvb
Newbie
 
Join Date: Jun 2007
Posts: 19
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 9 Times in 4 Posts
I just bought one pair of Pirelli model Jet Caju 27 x 1.1/4 here in Brazil. It is made in China, and wired. It weights 500g each.
dantonvb is offline  
Old 01-25-22, 12:23 PM
  #299  
oneclick 
Senior Member
 
Join Date: Feb 2020
Posts: 2,890
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Likes: 0
Liked 1,311 Times in 775 Posts
Black 1 1/4" Paselas available in Canada

My LBS just checked with their "supplier in Vancouver", "50 in stock there", and the price was reasonable so I'm in for four. Their store interface is the same as loads of other online LBS presences, I'd bet the same supplier get to other LBSs in the Great White North.

Only 46 now...
oneclick is offline  
Old 04-02-22, 01:32 PM
  #300  
Sailboat Bob
Junior Member
 
Sailboat Bob's Avatar
 
Join Date: Mar 2022
Posts: 9
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Whats the fastest option?

Setting up a racer for the season. Concerning speed and nothing else whats the best thing for 27" clinchers?
Sailboat Bob is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.