What do you do now?
#1
Newbie
Thread Starter
Join Date: Apr 2020
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What do you do now?
I'm searching for new career options. I've been wrenching for 15 years and I've finally realized I've slowly turned into the curmudgeonly jaded mechanic who dislikes his job. I don't hate it, there are lots of good parts about being a mechanic, but I'm sick of it. I've been in sales, service, been titled as "sales manager" and "service manager" and "general manager" of multiple shops. I've been around the bike shop block so to speak. Looking for the next step forward in life and I keep stumbling and not finding where to go.
#2
Senior Member
Join Date: Aug 2011
Posts: 554
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 52 Times
in
41 Posts
read: https://www.amazon.com/What-Color-Yo.../dp/1984856561
it will not give you the answer, but hopefully will provoke you to thought.
one of my take aways (paraphrased) = if you have an abundance of financial & emotional supports, you can go from A to D without a glitch. most of us have limitations, so we're inclined t go from A to B to C to … ad infinitum.
different jobs are part of our evolution as people. apparently you are cognizant of your well being enough to know when to make a change. at the risk of sounding glib, "follow your bliss". success comes in many forms, satisfaction being the main one. money, unfortunately the scorecard our society keeps, will follow. learning is cumulative, so just keep on it.
good luck!
it will not give you the answer, but hopefully will provoke you to thought.
one of my take aways (paraphrased) = if you have an abundance of financial & emotional supports, you can go from A to D without a glitch. most of us have limitations, so we're inclined t go from A to B to C to … ad infinitum.
different jobs are part of our evolution as people. apparently you are cognizant of your well being enough to know when to make a change. at the risk of sounding glib, "follow your bliss". success comes in many forms, satisfaction being the main one. money, unfortunately the scorecard our society keeps, will follow. learning is cumulative, so just keep on it.
good luck!
Likes For southpier:
#3
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
Become a mechanic in a different line of work?
I feel similarly as you. I've been turning wrenches in a different industry for nearly 25 years. Even though my primary income production for my employer is me turning wrenches, I also do sales, maintenance contracts, and web design/maintenance for the company.
My biggest problem is I'm really burned out of traveling. In my case I'd like to work in a place where the machines are brought to me. Years ago I had one service contract for about 1.5 years servicing machines all in one building, and it had its downsides, but at least I could leave my tools at work and pick a less mundane type of transportation to get there. I sure liked riding my last motorcycle to work during that time.
The pic below is a typical loadout of about 1/2 of my tools that I may have to roll several city blocks from my van. By the way, I love stairs so very much.
I feel similarly as you. I've been turning wrenches in a different industry for nearly 25 years. Even though my primary income production for my employer is me turning wrenches, I also do sales, maintenance contracts, and web design/maintenance for the company.
My biggest problem is I'm really burned out of traveling. In my case I'd like to work in a place where the machines are brought to me. Years ago I had one service contract for about 1.5 years servicing machines all in one building, and it had its downsides, but at least I could leave my tools at work and pick a less mundane type of transportation to get there. I sure liked riding my last motorcycle to work during that time.
The pic below is a typical loadout of about 1/2 of my tools that I may have to roll several city blocks from my van. By the way, I love stairs so very much.
Last edited by FiftySix; 04-18-20 at 07:53 PM.
Likes For FiftySix:
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,070
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4198 Post(s)
Liked 3,850 Times
in
2,300 Posts
Well in the bike field there's going over to the dark sides. Shop ownership or the supply side. All the abilities we use in repairing bikes cross over to many other fields (electrical, plumber, autos, medical ands nuke plants). But don't expect the human interactions to change. In fact the closer to the basic human need the field gets (home, food transportation) the greater the customer's expectations can get. After 45+ years in the LBS (15 as shop owner) I've had many co workers pass through the bike business and move on. Some were very glad and did find their true calling. Others still were jaded and listless. That parts up to you.
I have always suggest some career consoling to these coworkers. They are the pros at asking the right questions, listening to your answers and have had the range of experience in guiding many others (then we have). Andy (who really doesn't consider the other sides to be bad, just injecting some humor)
I have always suggest some career consoling to these coworkers. They are the pros at asking the right questions, listening to your answers and have had the range of experience in guiding many others (then we have). Andy (who really doesn't consider the other sides to be bad, just injecting some humor)
__________________
AndrewRStewart
AndrewRStewart
#5
Sr Member on Sr bikes
Look here: https://bicycleindustryjobs.com/JobSearch
Dan
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,070
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4198 Post(s)
Liked 3,850 Times
in
2,300 Posts
Dan- Right now the teams are trying to reduce their staff if at all possible. I would not suggest a long term faith in a field that is very volatile in the cash flow. Sponsors and brands are well known for changing their business plans. All it takes is a change in one or two positions in the company to have a different view to the benefit of supporting a team. But this is why I suggested a professional career consoler as they see the big picture better then those in the middle of a specific field do. Andy
__________________
AndrewRStewart
AndrewRStewart
#7
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
I started in shops ('77) then went into repping (several industry firms beginning in '87) and then back to school in ('02) for an IT certificate and hung on for ten years until retirement. Work is work, so find something you like.
Career counseling was not helpful or inspiring when I tried it.
Career counseling was not helpful or inspiring when I tried it.
Last edited by thumpism; 04-18-20 at 07:15 PM.
#8
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,507
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2743 Post(s)
Liked 3,390 Times
in
2,053 Posts
Trades. Plumbers, electricians, HVAC, etc aren't going anywhere soon.
Likes For dedhed:
#9
Junior Member
Did computer repairs, sales, and service for the last eleven years. I've been burned by employers for the last time in that field, burned out and unemployed. Totally understand how TC feels. They hire you to do one job, and next thing you know they're dumping the workloads of people that have either quit or been fired on you and still expect you to do the original job as well as you ever had before, and get mad at you when you can't complete all of it in a given day! First computer shop I worked at was great the first couple years, then they dumped three additional job position duties squarely on me, and by the time they fired me for "poor job performance" I had been tasked with the workloads of five employees! They did me a favor firing me after eight years as my stress levels were beyond anything I care to ever experience again, but it hurt none the less as I liked really working there.
Second computer store/shop I was at I quit after a little over three years as it was a completely opposite experience in that I hated working there and the management team was almost entirely made up of scumbags that wouldn't hesitate to rip-off a customer. Final straw was when both the department manager and department supervisor positions became available in the same month and they promoted two of the most obnoxious and lazy people in the department into those positions. Day one of their rain I showed up for my shift, was taken to the office for a "one on one" with the new department manager and told to my face that I was the most named person in the department's positive online customer feedback for ten consecutive months running, but my revenue metrics sucked so I needed to stop being so nice to the customers. Yeah... and then people wonder why Geek Squad has a bad reputation. So I gave my two week notice that week and have never set foot inside of a Best Buy since that two weeks was up. But lo' and behold, places I've applied at have shocked me with informing me that my resume is wrong, stating that they were informed I was fired from Best Buy for thirty-straight days of "no call, no show".
So yeah, in the seventeen months since quitting Best Buy, which I absolutely do not regret doing, I tried to go independent and do computer repair, but it's a dead market. People are scared to death of hiring someone to work on their computer who doesn't have a storefront (thanks media). I had one customer the entirety of 2019 for computer repair, and he not only didn't pay me the rate I quoted him, he wanted to argue about me simply advising him to replace a obviously failing thirteen year old computer in his business office, that his secretary was complaining about. At that point I said screw-it, I make more money selling stuff on Ebay and don't have the pressure of being asked if I'm done yet every five minutes. Then also began refurb'ing and flipping bicycles on Craigslist. Both said resell markets are highly volatile, and my income last year sucked bad enough that I'm still looking for a regular job.
Second computer store/shop I was at I quit after a little over three years as it was a completely opposite experience in that I hated working there and the management team was almost entirely made up of scumbags that wouldn't hesitate to rip-off a customer. Final straw was when both the department manager and department supervisor positions became available in the same month and they promoted two of the most obnoxious and lazy people in the department into those positions. Day one of their rain I showed up for my shift, was taken to the office for a "one on one" with the new department manager and told to my face that I was the most named person in the department's positive online customer feedback for ten consecutive months running, but my revenue metrics sucked so I needed to stop being so nice to the customers. Yeah... and then people wonder why Geek Squad has a bad reputation. So I gave my two week notice that week and have never set foot inside of a Best Buy since that two weeks was up. But lo' and behold, places I've applied at have shocked me with informing me that my resume is wrong, stating that they were informed I was fired from Best Buy for thirty-straight days of "no call, no show".
So yeah, in the seventeen months since quitting Best Buy, which I absolutely do not regret doing, I tried to go independent and do computer repair, but it's a dead market. People are scared to death of hiring someone to work on their computer who doesn't have a storefront (thanks media). I had one customer the entirety of 2019 for computer repair, and he not only didn't pay me the rate I quoted him, he wanted to argue about me simply advising him to replace a obviously failing thirteen year old computer in his business office, that his secretary was complaining about. At that point I said screw-it, I make more money selling stuff on Ebay and don't have the pressure of being asked if I'm done yet every five minutes. Then also began refurb'ing and flipping bicycles on Craigslist. Both said resell markets are highly volatile, and my income last year sucked bad enough that I'm still looking for a regular job.
#10
Senior Member
Join Date: Aug 2011
Posts: 554
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 52 Times
in
41 Posts
this guide gives a general direction for job growth, so if anyone wants to pursue, there will be some reward: https://www.bls.gov/ooh/
#12
Useless Member
Join Date: Jun 2015
Location: Louisville, KY
Posts: 745
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Liked 181 Times
in
113 Posts
I'm searching for new career options. I've been wrenching for 15 years and I've finally realized I've slowly turned into the curmudgeonly jaded mechanic who dislikes his job. I don't hate it, there are lots of good parts about being a mechanic, but I'm sick of it. I've been in sales, service, been titled as "sales manager" and "service manager" and "general manager" of multiple shops. I've been around the bike shop block so to speak. Looking for the next step forward in life and I keep stumbling and not finding where to go.
BTW, research any company before you take the bait on the hook. How have others fared with this company? What are their turnover rates? Is their pay what you are going to expect? Do NOT believe them when say advancement opportunities are great. Ask WHY advancement opportunities are great. Is it because they burn out their employees and they leave the company?
I've found the best companies to work for are the ones that are the hardest to get a job with. Persistence pays off here. Keep at them. Keep on trying and never take no for an answer. In fact, as a hiring manager myself, I kind of liked the people who were a pain in the rear and wanting a job. It showed tenacity.
Good luck!
Last edited by UKFan4Sure; 04-19-20 at 08:54 AM.
Likes For UKFan4Sure:
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,399 Times
in
1,933 Posts
When I burned out on bicycle mechanics, I became an RN and worked in hospitals for the next couple decades. Now that I'm retired, I've been able to return to bicycle mechanics on my own terms, volunteering at a local charity bike shop.
#14
Senior Member
Join Date: Aug 2011
Posts: 554
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 52 Times
in
41 Posts
you don't want to be the 50 year old guy with a 30 gallon bucket of grass clippings on your shoulder.
Likes For southpier:
#15
Senior Member
The last of the great salaried jobs are in Utilities, (Gas, Power, Water, Phone, Transportation, etc.) Government, or, large Multinational Corporations. We're really living in the big brother age now. The haves get salaries vacations & benefits. The have nots get hourly wages and not much more.
#16
Full Member
How about opening your own bike shop? Now, running your own business can open up a whole can of worms of problems and headaches that you'd have to deal with. I would only recommend this in an area that has a decent labor market. But you get to call the shots. If you have a decent head and can figure out a budget, go for it. It really doesn't take too much $ to open the doors. Plan for the worst and hope for the best. If you have a passion for riding, make sure it won't take that away.
I speak from experience in this area
I speak from experience in this area
#17
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
Just guessing that medical technology repair might be a decent biz to get into, after the hullabaloo blows over, or perhaps before. There could be jobs with the local reps of the equipment makers (GE, etc.) or a position at a hospital or clinic network. There's likely to be more money in repairing million dollar gadgets, than thousand dollar gadgets. It might require a bit of training at your nearby tech school, or an employer willing to train you. A good diagnostician who can follow procedures is valuable. And your experience as a bike mechanic means people have trusted you for their safety, over and over again.
A friend of mine went from musical instrument repair, to diesel mechanic for the city bus service. Now he's got a union, retirement, etc.
A friend of mine went from musical instrument repair, to diesel mechanic for the city bus service. Now he's got a union, retirement, etc.
Likes For Gresp15C:
#18
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,835
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 802 Post(s)
Liked 703 Times
in
376 Posts
Just guessing that medical technology repair might be a decent biz to get into, after the hullabaloo blows over, or perhaps before. There could be jobs with the local reps of the equipment makers (GE, etc.) or a position at a hospital or clinic network. There's likely to be more money in repairing million dollar gadgets, than thousand dollar gadgets. It might require a bit of training at your nearby tech school, or an employer willing to train you. A good diagnostician who can follow procedures is valuable. And your experience as a bike mechanic means people have trusted you for their safety, over and over again.
A friend of mine went from musical instrument repair, to diesel mechanic for the city bus service. Now he's got a union, retirement, etc.
A friend of mine went from musical instrument repair, to diesel mechanic for the city bus service. Now he's got a union, retirement, etc.
I work directly with the vendor's repair people to fix things that I can't do myself. The repair guys are pretty cool- very knowledgeable about computer hardware and their specialized parts and willing to do what it takes to get a malfunctioning machine back in service. The downside is that they are spread thin- they're mobile and on call 24 hours a day. They have told me that they can rack up 40 hours of overtime per week.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#19
Member
Ankurmenon:
I’m curious what elements of the current setting you dislike? The work itself, (sounds as though you may be burned out a bit) and simply the bike shop environment? or the people you work with (co-workers & bosses as opposed to customers)? Also, although advice is completely free and easy to come by, it would be hard to make suggestions without knowing your circumstances. I’m wondering roughly your age- is college an option at this point, do you already have a degree, and if so, what field?
I’m curious what elements of the current setting you dislike? The work itself, (sounds as though you may be burned out a bit) and simply the bike shop environment? or the people you work with (co-workers & bosses as opposed to customers)? Also, although advice is completely free and easy to come by, it would be hard to make suggestions without knowing your circumstances. I’m wondering roughly your age- is college an option at this point, do you already have a degree, and if so, what field?
#20
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
much like the field which I fell (construction), it gets tougher when you get older. I think the average age leaving the construction business is 33 and I lasted until 45 before going to matchbook college. credentialized many of my skills & taught me more new ones.
you don't want to be the 50 year old guy with a 30 gallon bucket of grass clippings on your shoulder.
you don't want to be the 50 year old guy with a 30 gallon bucket of grass clippings on your shoulder.
#23
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
I think the first question is whether you hate turning wrenches of any sort and don't want to do that in any industry. If you still like the mechanical aspect of work, then you might want to look into working for a city or county. There will always be parts of any job that you will hate, but there is a different atmosphere working for the government. And the benefits are good.
Our son went to school for HVAC and then worked doing maintenance for a pharmaceutical company for a while. From there he got a job working for a city in Arizona. Summers are brutal, but it has been a great job for him. He likes to get in there and get things done, so they pretty much leave him alone. And doing HVAC in AZ is a job he can have for as long as he wants to do it.
John
Our son went to school for HVAC and then worked doing maintenance for a pharmaceutical company for a while. From there he got a job working for a city in Arizona. Summers are brutal, but it has been a great job for him. He likes to get in there and get things done, so they pretty much leave him alone. And doing HVAC in AZ is a job he can have for as long as he wants to do it.
John