Gravel saddle feedback
#1
Junior Member
Thread Starter
Join Date: May 2022
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Gravel saddle feedback
Greetings,
I've recently joined the gravel crowd, having recently bought an ibis Hakka MX.
The saddle which the custom builder put on the bike (Supacaz Scorch) is too firm for my sharp, narrow sit bones.
I'm a competitive cyclist, so more often that not, I settle onto the front of my saddle, when pushing. The problem with minimalist saddles, for me, occurs when I sit more upright, whether to rest, or climb ... and that's when my sit bones dig in. Since my new bike's geometry is more in the gravel ballpark, I'm likely to be more upright than I used to, esp compared to triathlons! I will be riding a mix of road and gravel, but probably more road for a while.
Given the above, I've narrowed down my choice to the following 3 saddles. I'd appreciate some feedback from folks who may either have tried or currently use them. Thanks.
- WTB SL8 Carbon (narrow)
- Sella Repente Artax GL
- Selle Italia X-LR TI316 Superflow
I'd also been considering the Specialized Phenom S-Works, in the same weight category, but I've already sold my left kidney to buy the bike and various other components. Anyone interested in an appendix?
Looking forward to some useful feedback, thanks!
I've recently joined the gravel crowd, having recently bought an ibis Hakka MX.
The saddle which the custom builder put on the bike (Supacaz Scorch) is too firm for my sharp, narrow sit bones.
I'm a competitive cyclist, so more often that not, I settle onto the front of my saddle, when pushing. The problem with minimalist saddles, for me, occurs when I sit more upright, whether to rest, or climb ... and that's when my sit bones dig in. Since my new bike's geometry is more in the gravel ballpark, I'm likely to be more upright than I used to, esp compared to triathlons! I will be riding a mix of road and gravel, but probably more road for a while.
Given the above, I've narrowed down my choice to the following 3 saddles. I'd appreciate some feedback from folks who may either have tried or currently use them. Thanks.
- WTB SL8 Carbon (narrow)
- Sella Repente Artax GL
- Selle Italia X-LR TI316 Superflow
I'd also been considering the Specialized Phenom S-Works, in the same weight category, but I've already sold my left kidney to buy the bike and various other components. Anyone interested in an appendix?
Looking forward to some useful feedback, thanks!
#2
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
My preference has been Fizik - I love the ALIANTE. Nashbar always seemed to have these available 50% off back in the day.
If you want to sell a kidney or appendix, get one of these instead of the Specialized.
ANTARES VERSUS EVO R3 ADAPTIVE (the 3D printed thingy). If that isn't enough, higher end versions can cost an additional $150. ;-)
If you want to sell a kidney or appendix, get one of these instead of the Specialized.
ANTARES VERSUS EVO R3 ADAPTIVE (the 3D printed thingy). If that isn't enough, higher end versions can cost an additional $150. ;-)
#3
Junior Member
Thread Starter
Join Date: May 2022
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks chas58, I'll review the Aliante as well. Please confirm that you also have narrow sit bones? My geometry isn't run-of-the mill
Holding back on further body parts sales, for now.
Holding back on further body parts sales, for now.
#4
Senior Member
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times
in
173 Posts
if you like the shape of the aliante, consider a fabric scoop radius. Has built in flex in the shell compared to most of the fiziks I've owned that are relatively stiff. The channeled models of the fabric saddles are a bit stiffer similar to the VS/versus fizik equivalents.
Likes For redlude97:
#5
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
One of the most popular in the endurance crowd (and my favorite) is the Selle An Atomica.
#6
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
if you like the shape of the aliante, consider a fabric scoop radius. Has built in flex in the shell compared to most of the fiziks I've owned that are relatively stiff. The channeled models of the fabric saddles are a bit stiffer similar to the VS/versus fizik equivalents.
#8
Junior Member
Thread Starter
Join Date: May 2022
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, I've looked it up. It's likely to be too short though. I currently find myself perched on the tip of my Supacaz Scorch when pushing hard, and it's 270mm in length, whereas the SLR is 248mm, so quite a difference. I guess the fit will have more to do with where the rails are and the eventual horizontal position of the saddle tip w.r.t the handlebars.
#9
Junior Member
Thread Starter
Join Date: May 2022
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
When you speak of endurance, are you referring to easy cruising, or pushing hard (racing)? 200km racing?
#10
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
As is true for all saddle discussions, what I like has no bearing on what you like. The concept of a special saddle for gravel doesn't compute with me. I use the same saddle on all my bikes. It happens to be E3 Form (no longer made) and its successor Kontact. But I don't recommend them other to say, it's a little known brand and worth checking out. it's got a narrow nose and flat sitting surface, no cutout.
#11
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
As is true for all saddle discussions, what I like has no bearing on what you like. The concept of a special saddle for gravel doesn't compute with me. I use the same saddle on all my bikes. It happens to be E3 Form (no longer made) and its successor Kontact. But I don't recommend them other to say, it's a little known brand and worth checking out. it's got a narrow nose and flat sitting surface, no cutout.
Likes For chas58:
#12
Junior Member
Join Date: Jul 2020
Location: New Hampshire
Posts: 196
Bikes: 1984 homemade 531SL road bike; 1988 Ritchey TimberComp; 1997 Nashbar tandem; 1998 Kona Explosif; Specialized Epic, Scott CR1 Pro; Salsa Beargrease; Curtlo custom Tandem, Curtlo custom S3 steel gravel bike.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 49 Times
in
37 Posts
I agree there is really no such thing as a gravel saddle, but the Berk Dila saddle on gravel works very well. Immediate feeling is like a suspension seatpost - the saddle eats up so much vibration that it’s hard to believe how comfortable it is. Also crazy light and expensive, but comfort is important!
#13
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
I find my gravel saddle preference to be the same as my pavement saddle preferences. No difference for.
MTB is a different for me.
MTB is a different for me.