Veloplugs rant
#1
Senior Member
Thread Starter
Join Date: Aug 2009
Posts: 2,592
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1541 Post(s)
Liked 1,702 Times
in
956 Posts
Veloplugs rant
I got some red (small) veloplugs. They are too small for my son's MTB rim, as expected. Now I tried to put them in an Araya CT-19N rim. They absolutely will not go in. Then I tried it on a Mavic MA-2 rim. It goes it but will not stay in due to the slick walls of the eyelet. And I got over 100 of these (got them used).
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times
in
3,262 Posts
Maybe they just aren't for your rims.
Red Veloplugs fit 8.0 mm rim holes.
Red or Yellow? What size / colour should I use?
Unfortunately for many rims this can not be said with certainty since the hole size may vary from batch to batch.
To be sure please measure the hole size of your rim before ordering
https://veloplug.com/en/
There are two sizes of Veloplugs
The Yellow Veloplugs fit rim holes from 8.5 to 9.3 mmRed Veloplugs fit 8.0 mm rim holes.
Red or Yellow? What size / colour should I use?
Unfortunately for many rims this can not be said with certainty since the hole size may vary from batch to batch.
To be sure please measure the hole size of your rim before ordering
Likes For Iride01:
#3
Senior Member
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times
in
7,231 Posts
Hope they were free.
#4
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Why would you even...?
Likes For cxwrench:
#5
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 8,237
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3846 Post(s)
Liked 6,437 Times
in
3,183 Posts
Can you find another use for them? I once inherited thousands of rubber nipples and found dozens of uses for them, er, several anyway, including as knee warmers.
#6
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,418
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,595 Times
in
1,021 Posts
OK... Thanks... Here is another note for my USF file. Multiple plug sizes for different rims... Yep, Got It...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
#7
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,830
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7, Trek Emonda ALR, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Liked 1,666 Times
in
980 Posts
I used velo plugs in the past on some Mavic wheels and they worked great, but after I broke a couple of spokes when I hit a fairly good sized rock on the trail, I found they did not want to stay in after I removed to replace the spokes. I removed them and went back to the Velox. They are a nice idea but more of a answer to a problem that did not really exist.
Likes For jaxgtr:
#8
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1107 Post(s)
Liked 1,197 Times
in
758 Posts
I've used Veloplugs for many years on several different wheels. They work great. I keep a couple in my saddle bag thinking they might come out and get lost during a roadside tube change, but it's never happened. They are care free in my experience. OTOH, they don't work on some wheels, that's just life. Ironically, they don't work on my off center Velocity rim. They work on the front one. From my memory - without going to look at the bag of extras I have - I think there's two sizes/types.
As a solution to the wheels they don't work on, I used tape but it didn't upset me.
As a solution to the wheels they don't work on, I used tape but it didn't upset me.
Likes For icemilkcoffee:
#10
Senior Member
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times
in
7,231 Posts
#11
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
In lieu of.
Likes For cxwrench:
#12
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,217
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 653 Post(s)
Liked 345 Times
in
225 Posts
I've used them on Velocity rims with no problems.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer