For cleat’s sake!
#1
Junior Member
Thread Starter
For cleat’s sake!
Bought my first ever pair of clipless shoes and cleats at end of September (as well as first bike in about 15 years) and have worn them out already having cycled 1,500km.
I noticed them looking very worn within a week or two (the yellow grippy parts almost entirely gone). I thought I was probably having some extra wear as not used to clipless, but the left shoe failed completely after ten weeks. Luckily was close to a mate’s house who had a set to replace them with.
The new set (also Shimano) already look really beat up after about a week.
I went out and bought four new pairs of cleats (thinking it must be routine to replace them every quarter), but have since found out four pairs of cleats should last me a decade! Haha I know now that they should last at least two years/up to 5,000 miles.
So what am I doing wrong?
In terms of walking in them I do maybe 50 metres from the bike shed to changing rooms at work, four or five times a week. The 50 metre return involves walking down three flights of stairs. Are they so fragile that that amount of walking is the problem?
Attached are pictures of my first set of cleats after ten weeks and the new set after one week.
Thanks!
Original
Original
One week old
I noticed them looking very worn within a week or two (the yellow grippy parts almost entirely gone). I thought I was probably having some extra wear as not used to clipless, but the left shoe failed completely after ten weeks. Luckily was close to a mate’s house who had a set to replace them with.
The new set (also Shimano) already look really beat up after about a week.
I went out and bought four new pairs of cleats (thinking it must be routine to replace them every quarter), but have since found out four pairs of cleats should last me a decade! Haha I know now that they should last at least two years/up to 5,000 miles.
So what am I doing wrong?
In terms of walking in them I do maybe 50 metres from the bike shed to changing rooms at work, four or five times a week. The 50 metre return involves walking down three flights of stairs. Are they so fragile that that amount of walking is the problem?
Attached are pictures of my first set of cleats after ten weeks and the new set after one week.
Thanks!
Original
Original
One week old
Likes For Cramic:
#2
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,518
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3658 Post(s)
Liked 5,404 Times
in
2,744 Posts
My experience was similar. After years of SPDs, I tried SPD SL and road shoes earlier this year. I never got comfortable with them and didn't see an advantage over SPDs and A600 single sided pedals. I went back to the SPDs in a few months when the first set of cleats wore out.
Likes For shelbyfv:
Likes For nomadmax:
#4
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
+1. Rubber covers are cheaper than 1 pair of name brand cleats.
I walk in mine for short distances if I don’t have covers with me and my cleats do not wear-out so fast. Maybe my choice of the older Looks are thicker and potentially more durable. A case of ‘old tech’ being more durable than comparable ‘new tech’? IDK.
edit: cleat covers go just above the leg band on cycling shorts when riding.
I walk in mine for short distances if I don’t have covers with me and my cleats do not wear-out so fast. Maybe my choice of the older Looks are thicker and potentially more durable. A case of ‘old tech’ being more durable than comparable ‘new tech’? IDK.
edit: cleat covers go just above the leg band on cycling shorts when riding.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 12-17-21 at 08:47 AM.
Likes For Wildwood:
#6
Senior Member
Join Date: Sep 2017
Posts: 7,860
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6950 Post(s)
Liked 10,958 Times
in
4,685 Posts
I am baffled that your cleats are wearing that fast. I use the same system on my road bikes, and see nothing like that.
Even though you have already invested in SPD-SL, you should switch to SPD pedals and shoes. The recessed cleats last a long time, even if you are doing much walking on them. Oh, and they're easier to walk in.
Even though you have already invested in SPD-SL, you should switch to SPD pedals and shoes. The recessed cleats last a long time, even if you are doing much walking on them. Oh, and they're easier to walk in.
Likes For Koyote:
#7
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,976
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6186 Post(s)
Liked 4,803 Times
in
3,313 Posts
If you walk much at all in them, then get covers or SPD cleats. I've been exclusively SPD on my road bikes since 2010 and haven't had a cleat wear out yet before it was time for new shoes which come with their own shiny new cleat.
#8
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Dragging one foot when coming to a stop? Walking and drafgging your feet? I used SPD SL for years on the road and racing on the track. I don't ever remember actually wearing out a pair of cleats. That includes walking in them. It looks like you're trying to wear them out.
Likes For cxwrench:
#9
Airplanes, bikes, beer.
Join Date: Jan 2020
Location: Off the front
Posts: 763
Bikes: Road bikes, mountain bikes, a cx bike, a gravel bike…
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 788 Times
in
339 Posts
The cleats on my SIDI shoes have at least 14,000 miles on them. (New in early 2020, still riding with them.) I’ll try to remember to get a pic. They’re not even close to the OP’s pics, though.
Likes For AdkMtnMonster:
#10
Senior Member
Join Date: Jan 2010
Posts: 39,229
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18409 Post(s)
Liked 15,518 Times
in
7,324 Posts
Might they be fake Shimano cleats?
#11
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
Bought my first ever pair of clipless shoes and cleats at end of September (as well as first bike in about 15 years) and have worn them out already having cycled 1,500km.
I noticed them looking very worn within a week or two (the yellow grippy parts almost entirely gone). I thought I was probably having some extra wear as not used to clipless, but the left shoe failed completely after ten weeks. Luckily was close to a mate’s house who had a set to replace them with.
The new set (also Shimano) already look really beat up after about a week.
I went out and bought four new pairs of cleats (thinking it must be routine to replace them every quarter), but have since found out four pairs of cleats should last me a decade! Haha I know now that they should last at least two years/up to 5,000 miles.
So what am I doing wrong?
In terms of walking in them I do maybe 50 metres from the bike shed to changing rooms at work, four or five times a week. The 50 metre return involves walking down three flights of stairs. Are they so fragile that that amount of walking is the problem?
Attached are pictures of my first set of cleats after ten weeks and the new set after one week.
Thanks!
Original
Original
One week old
I noticed them looking very worn within a week or two (the yellow grippy parts almost entirely gone). I thought I was probably having some extra wear as not used to clipless, but the left shoe failed completely after ten weeks. Luckily was close to a mate’s house who had a set to replace them with.
The new set (also Shimano) already look really beat up after about a week.
I went out and bought four new pairs of cleats (thinking it must be routine to replace them every quarter), but have since found out four pairs of cleats should last me a decade! Haha I know now that they should last at least two years/up to 5,000 miles.
So what am I doing wrong?
In terms of walking in them I do maybe 50 metres from the bike shed to changing rooms at work, four or five times a week. The 50 metre return involves walking down three flights of stairs. Are they so fragile that that amount of walking is the problem?
Attached are pictures of my first set of cleats after ten weeks and the new set after one week.
Thanks!
Original
Original
One week old
First thing I would do is do the cleat cover experiment - get some covers and use them for as much of your walking as possible for a few weeks - it's likely that this will solve the problem.
The other possibility is that they're lower quality knockoffs. Where do/did you buy them? There are any number of "SPD-SL-compatible" cleats on-line - some clearly not Shimano, but I imagine that some are actual knock-offs. The fact that a pair of the real thing can cost up to $30, there's real incentive for knockoffs. I'm happy to buy most things online, but I'm always willing to pay the LBS premium for real cleats.
Likes For Litespud:
Likes For AdkMtnMonster:
#13
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,471
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 960 Post(s)
Liked 1,626 Times
in
1,044 Posts
"These boots aren't made for walking..."
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#14
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,872
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 763 Post(s)
Liked 1,730 Times
in
1,007 Posts
what the hell are you walking through that would cause that much wear, a shredder? I used SPD-SL's for a few years and outside of a little wear on the front pads, they looked practically brand new after 5-6K miles. If you are seeing that much wear, I would wear a pair of slip on shoes to where you park your bike, they will run maybe $10 and last a long time, or move to a MTB pedal system like Time ATACs or SPD types.
Likes For jaxgtr:
#15
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Get a pair of these. Kool Kovers Cleat Covers Products
#16
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,902
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4802 Post(s)
Liked 3,922 Times
in
2,551 Posts
Get a pair of these. Kool Kovers Cleat Covers Products
I carry my Kovers on a carabiner hung from a seat rail. (The small, cheao REI carabiners.) Looks dorky but a good place for an item that might have stepped in ????.
Likes For 79pmooney:
#17
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,109
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 852 Post(s)
Liked 1,433 Times
in
815 Posts
It does not take many steps to ruin the spd-sl pedals. I like those and the spd's, both used on road bikes. I use the spd type much more these days. I stop more often and walk more steps than I used to. I have the covers for the sl, which work well, it is just easier to use spd style. I don't prefer one over the other for clipping in or out; or foot stability, comfort or heat spot issues. I keep spd-sl on my Airborne Zeppelin with cleat covers in a top tube bag.
I do not know if this is normal, I suspect not, but both of my pairs spd-sl shoes are wider in the toe box than any of my spd shoes. I do like that.
I do not know if this is normal, I suspect not, but both of my pairs spd-sl shoes are wider in the toe box than any of my spd shoes. I do like that.
#18
Banned
Join Date: Feb 2008
Location: Mississauga/Toronto, Ontario canada
Posts: 8,721
Bikes: I have 3 singlespeed/fixed gear bikes
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 2,488 Times
in
1,286 Posts
Use platform pedals with non-cycling shoes.
#19
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
Are you a very large, heavy person, or is the (likely) concrete that you're walking on extremely rough?
I don't walk a ton (more than 20' I'll get on the bike) but I don't baby the cleats either, & they seem to last a couple of years.
I don't walk a ton (more than 20' I'll get on the bike) but I don't baby the cleats either, & they seem to last a couple of years.
#20
Senior Member
Join Date: Feb 2018
Posts: 1,410
Bikes: 2017 Specialized Allez Sprint Comp
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 850 Post(s)
Liked 344 Times
in
247 Posts
I've done a hike through like half a mile of sharp gravel that was a ~15% uphill grade and I still didn't even wear my cleats 10% that bad. You're either *very* heavy or you're dragging your feet like crazy.
make sure to walk primarily on your heels. I could see stairs doing this if you're slipping the cleats on the stairs. I usually walk sideways on stairs to reduce this.
make sure to walk primarily on your heels. I could see stairs doing this if you're slipping the cleats on the stairs. I usually walk sideways on stairs to reduce this.
#21
Sr Member on Sr bikes
I’m just reiterating what others have said above…that cleats aren’t made for walking, and that you should keep some cleat covers with you for when you do have to walk in them (i.e. flats, breakdowns mid-ride). From from the pics you posted it’s clear that you’re walking in them way too much. The screws and washers/plates securing them to the shoe aren’t the least bit rusted or tarnished yet. And also word of advice…if you end up getting cleats that don’t have the softer rubber parts…walking on tile or smooth cement floors can be hazardous…like walking on ice.
Dan
Dan
#22
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,518
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3658 Post(s)
Liked 5,404 Times
in
2,744 Posts
My guess is I only got 3,000-4,000 miles before most of the yellow was gone from my left (down foot) cleat. I'm close, but not quite, a Clyde. Usually put a foot down two or three times in a 60 mile ride. Maybe a few yards in and out of a convenience store. Obviously I was rough on them somehow. I never thought to be careful with them. Most of my friends use "road" pedals, either SPD SL or Look, I haven't heard much chatter about cleats wearing out. Maybe squirrels got in the garage and gnawed them....
#23
Senior Member
Regular SPD pedals are fine. After using Time, Look, Speedplay, and other types, I eventually gravitated to ordinary SPDs. They are the longest-lasting and most economical, not to mention giving you a much wider range of shoe options. Cleat covers do work, but are one more thing you have to carry, and they are easily lost.
Last edited by 50PlusCycling; 12-19-21 at 01:47 AM.
Likes For 50PlusCycling:
#24
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,372
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,963 Times
in
1,913 Posts
you're supposed to use athletics shoes when participating in those marathon , & then swap the footwear when hopping on the clipless pedals.
as it has been posted, try some protective covers.
as it has been posted, try some protective covers.
__________________
-Oh Hey!
-Oh Hey!
Likes For Troul:
#25
Junior Member
Thread Starter
Thanks for all the replies! Seems mystery isn’t quite solved, but will certainly get myself a set of covers.
To address a few comments:
I’m 100kg/220lb, so heavier than many cyclists no doubt. I do tread lightly though and don’t drag my feet. When running you can’t hear me coming (except the laboured breathing!).
To my knowledge the cleats are genuine Shimano products. First set came with my new shoes and were fitted in the Giant store.
So will start with the clear covers and see if that solves the problem! Thanks again!
To address a few comments:
I’m 100kg/220lb, so heavier than many cyclists no doubt. I do tread lightly though and don’t drag my feet. When running you can’t hear me coming (except the laboured breathing!).
To my knowledge the cleats are genuine Shimano products. First set came with my new shoes and were fitted in the Giant store.
So will start with the clear covers and see if that solves the problem! Thanks again!