Go Back  Bike Forums > Bike Forums > Fitting Your Bike
Reload this Page >

Saddle Position

Notices
Fitting Your Bike Are you confused about how you should fit a bike to your particular body dimensions? Have you been reading, found the terms Merxx or French Fit, and don’t know what you need? Every style of riding is different- in how you fit the bike to you, and the sizing of the bike itself. It’s more than just measuring your height, reach and inseam. With the help of Bike Fitting, you’ll be able to find the right fit for your frame size, style of riding, and your particular dimensions. Here ya’ go…..the location for everything fit related.

Saddle Position

Old 01-14-21, 02:52 PM
  #1  
Roadies_Rok
Junior Member
Thread Starter
 
Roadies_Rok's Avatar
 
Join Date: Nov 2014
Location: Virginia Beach, VA
Posts: 76

Bikes: Litespeed Arenberg Road Bike; Specialized Crossroads XC Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Liked 12 Times in 8 Posts
Saddle Position

Hi All, I unexpectedly bought 2 bikes last year. A Hybrid and a Road Bike. On both bikes the saddles were pretty much trashed and one saddle I knew from experience would not work for me so I replaced both saddles and am doing OK.

I have a Specialized Phenom Saddle on my Hybrid and a Specialized Riva on my Road Bike. Both saddles are 143mm. I put the saddles on my bikes in the order that I bought the bikes and had the saddles. The Phenom saddle on my Hybrid has a minimum of padding and the Riva saddle on my Road Bike has noticeable padding. Not tons of padding but noticeable. I am going to change the saddles around and switch the Phenom onto my Road Bike and the Riva onto my Hybrid and I want to try to get the fore and aft position as right as I can on the first try.

Is it better to measure from the handlebar to the nose of the saddle or is it better to measure from the handlebar to the part of the saddle where my sit bones rest? The saddles are different lengths and I am thinking if I measure handle bar to saddle nose that will make the location where my sit bones rest be off but I want to get input from the group here so what does everyone think? Comment, opinions, thoughts? Thanks everyone.
Roadies_Rok is offline  
Old 01-14-21, 03:07 PM
  #2  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,800

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6099 Post(s)
Liked 4,730 Times in 3,260 Posts
I always measure to where I think my sit bones are on the saddle. The nose will be fine if the saddle are the same profile. But perhaps the rear of the saddle might be more reliable place to measure to as the difference from where my sit bones are to the rear is probably more consistent than to the nose of various saddle profiles.

Also, when you say to the handle bars, that works for a flat bar, but on anything else, I'd measure where you actually keep your hands. For those that normally keep their hands on the horizontal part of a drop bar, then something is set up wrong or the frame is the wrong size.
Iride01 is offline  
Likes For Iride01:
Old 01-14-21, 04:09 PM
  #3  
Roadies_Rok
Junior Member
Thread Starter
 
Roadies_Rok's Avatar
 
Join Date: Nov 2014
Location: Virginia Beach, VA
Posts: 76

Bikes: Litespeed Arenberg Road Bike; Specialized Crossroads XC Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 55 Post(s)
Liked 12 Times in 8 Posts
Iride01 Thanks for weighing in. Your comment about the rear of the saddle makes sense so I will give that a try when I switch the saddles. Also I can see where you would make your comment about handlebars. I am not sure I necessarily agree with you but what you wrote does make sense. For me I spend 96% of my time riding on the brake hoods on my Road Bike so I think I will make my measurement to the area where the brifter meets the handlebar. My Hybrid has a flat bar so that is not as critical.

Thanks again for your thoughts and I hope your 2001 is a better year for you than 2020 was.
Roadies_Rok is offline  
Old 01-14-21, 08:27 PM
  #4  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4741 Post(s)
Liked 3,860 Times in 2,509 Posts
Much better than measuring bars to seat is to measure bottom bracket to seat. For seat position - you want the right relationship between the pivot at your hip and the pedal circle. Then adjust your handlebars to work. Next bike - duplicate the vertical and horizontal distances for both the seat and handlebars to the bottom bracket.

I put a piece of tape midway along the seat and measure both along the seat tube and horizontally from bottom bracket to the tape at the saddle centerline. (This is approximate. Different seats put my hips in different places. I ride and bring the wrench(es) to dial it in. For height, I look at (and feel) knee bend.)
79pmooney is offline  
Old 01-15-21, 12:48 PM
  #5  
Carbonfiberboy 
just another gosling
 
Carbonfiberboy's Avatar
 
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,500

Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004

Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3872 Post(s)
Liked 1,920 Times in 1,369 Posts
I never measure saddle fore-and-aft position to transfer to a different saddle on a different bike. Or even the same saddle on a different bike. Positions will be different if the bikes are different and thus I use the balance method to determine saddle position on each bike: I should be able to briefly remove my hands from the bars while pedaling without sliding forward on the saddle. After I have the correct saddle position, I adjust reach with the stem if necessary and then check balance again.
__________________
Results matter
Carbonfiberboy is offline  
Likes For Carbonfiberboy:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.