Bitex MTR rear hub vs Shimano XT
#26
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
Well, one of the benefits I see of this hub over the XT hubs:
I can convert the new Bitex front and rear hubs from quick release to up to 12x142 thru axle should I decide to get a different bike or frame in the future.
The XT hubs would have been stuck at quick release for me should I have gotten those.
I can convert the new Bitex front and rear hubs from quick release to up to 12x142 thru axle should I decide to get a different bike or frame in the future.
The XT hubs would have been stuck at quick release for me should I have gotten those.
#27
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,621
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,179 Times
in
770 Posts
Well I'm younger (49) but have been an empty nester for 10 years. Just juggling work and my recreational activities with my girl...biking, fly fishing, snow shoe, hunting, photography and a few other things.
#28
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
Well, one of the benefits I see of this hub over the XT hubs:
I can convert the new Bitex front and rear hubs from quick release to up to 12x142 thru axle should I decide to get a different bike or frame in the future.
The XT hubs would have been stuck at quick release for me should I have gotten those.
I can convert the new Bitex front and rear hubs from quick release to up to 12x142 thru axle should I decide to get a different bike or frame in the future.
The XT hubs would have been stuck at quick release for me should I have gotten those.
That is a very solid advantage !
(LOL - Except that most of the current stuff is boost 12x148 spacing --- sheesh it never ends ) - a lot of the gravel bikes are using 12x142 though and 29'er MTB wheels are perfect for those also
Likes For DMC707:
#29
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
I don't think I'm going to be able to keep up with the new standards that change so often anymore! I'm just going to use what I am getting and have fun!
#30
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times
in
1,366 Posts
They don't seem to be standards in the same sense as ASME or NAS.
Boost and 1x had a lot of mutual benefits. For one thing they make chain clearance for 3in tires on any kind of bike. Most of the cranks use the same arms with different ring dish so there's no Q factor increase. But they also made suspension a lot more efficient-pedaling because it does not have to tolerate three different chain ring sizes, so the pivot can line up with the chain and kill the anti-squat. Also eliminating the inner ring and putting the middle out made suspension pivots a lot wider.
Super Boost (157TA, borrowed from downhill bikes) is not getting nearly as much adoption.
__________________
Genesis 49:16-17
Genesis 49:16-17
Likes For Darth Lefty:
#31
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,621
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,179 Times
in
770 Posts
Hopefully the axles are set for a while now. I'm seeing 12 x 100 / 12 x 142 being common on road/gravel bikes now and 15 x 110 / 12 x 148 on mountain bikes now. Not sure Superboost will take hold.
Now if only they could standardize the bottom brackets...
Now if only they could standardize the bottom brackets...
#32
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,465
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4332 Post(s)
Liked 3,956 Times
in
2,644 Posts
Also don't forget road boost which is becoming slightly popular.
#33
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,621
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,179 Times
in
770 Posts
Oh goodness. Haven't heard about road boost yet.
One trend I'm starting to see is bike manufacturers go back to threaded bottom bracket after they finally realized just how bad press fit sucks.
One trend I'm starting to see is bike manufacturers go back to threaded bottom bracket after they finally realized just how bad press fit sucks.
#34
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
OH, I so agree with that statement on press fit bottom brackets! Why these are in aluminum frames I have no idea. Very soon I will be getting a Wheels Manufacturing bottom bracket to replace my son's Scale press fit. That thing creaks so badly.
In regards to previous topic, I checked the wheels I currently have to all 4 of our bikes.....sheesh, time to repack bearings on all of the Shimano and Formula hubs.
**Actually going to be a good learning experience for my teenage son. I will be showing him how to repack the bearings.
In regards to previous topic, I checked the wheels I currently have to all 4 of our bikes.....sheesh, time to repack bearings on all of the Shimano and Formula hubs.
**Actually going to be a good learning experience for my teenage son. I will be showing him how to repack the bearings.
Last edited by travbikeman; 05-11-21 at 08:07 AM.
#35
With a mighty wind
Join Date: May 2015
Posts: 2,582
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1086 Post(s)
Liked 858 Times
in
487 Posts
I have the Bitex rear hub. It's a relatively light, relatively inexpensive, and high engagement hub.
Don't sweat the bearings. They're going to last a long time. The big deal is that they are 3.5 degrees to get to engagement. Compare that to 12-18 for Shimano (if memory serves).
In practical terms, this means that in lower gears, especially coasting or backpedaling, it'll be a lot quicker to get back to power. This is what all the high end hub makers are marketing. The Bitex will get you awfully close at a good price.
Edit to add, check out configuration on the Bikehubstore website. I've got their Bitex hubs and Kinlin 30mm rims and am very happy. I built them myself but they're able to do it and send you a complete wheel.
Don't sweat the bearings. They're going to last a long time. The big deal is that they are 3.5 degrees to get to engagement. Compare that to 12-18 for Shimano (if memory serves).
In practical terms, this means that in lower gears, especially coasting or backpedaling, it'll be a lot quicker to get back to power. This is what all the high end hub makers are marketing. The Bitex will get you awfully close at a good price.
Edit to add, check out configuration on the Bikehubstore website. I've got their Bitex hubs and Kinlin 30mm rims and am very happy. I built them myself but they're able to do it and send you a complete wheel.
Likes For rosefarts:
#36
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
I have the Bitex rear hub. It's a relatively light, relatively inexpensive, and high engagement hub.
Don't sweat the bearings. They're going to last a long time. The big deal is that they are 3.5 degrees to get to engagement. Compare that to 12-18 for Shimano (if memory serves).
In practical terms, this means that in lower gears, especially coasting or backpedaling, it'll be a lot quicker to get back to power. This is what all the high end hub makers are marketing. The Bitex will get you awfully close at a good price.
Edit to add, check out configuration on the Bikehubstore website. I've got their Bitex hubs and Kinlin 30mm rims and am very happy. I built them myself but they're able to do it and send you a complete wheel.
Don't sweat the bearings. They're going to last a long time. The big deal is that they are 3.5 degrees to get to engagement. Compare that to 12-18 for Shimano (if memory serves).
In practical terms, this means that in lower gears, especially coasting or backpedaling, it'll be a lot quicker to get back to power. This is what all the high end hub makers are marketing. The Bitex will get you awfully close at a good price.
Edit to add, check out configuration on the Bikehubstore website. I've got their Bitex hubs and Kinlin 30mm rims and am very happy. I built them myself but they're able to do it and send you a complete wheel.
Thanks! It appears that ProWheelbuilder has already started working on my new wheels. I'm really looking forward to testing the Bitex hubs!
Likes For prj71:
#40
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
Received the new wheels in today. Thanks everyone for the advise! Looking forward to testing these out soon!
#42
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Martinsburg WV Area
Posts: 1,704
Bikes: State 4130 Custom, Giant Trance 29
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 182 Times
in
123 Posts
Sorry for late response! I think your asking what bike frame this is, not the rims? If so, it's a Scott Aspect 950. I wasn't able to get a few bikes that I wanted due to back orders, example the Trek Roscoe 7. Found this Scott Bike and tested it, it fit me really well. So my teenage son and I took this as a winter/covid project bike for us to learn more mechanics on a bike. I wasn't looking for a racing styled bike, just wanted to go out for fun to various trails and to use for bikepacking. Wasn't interested in jumping or other stunts but just wanted to be fun .... comfortably. We replaced and learned alot on fixing bikes by upgrading this bike. Plus it was just fun to work with my son on a project were we both enjoyed the hobby. I would tell you the list of what we changed, but think it would be simpler to tell you what we did not. Only original parts on this bike are the frame, headset bearings, brakes and rear rotor. Although thinking of upgrading the rear rotor to a larger size. Also, still unsure about that ixf crankset I put on, might be upgrading that this fall if I find others that own these are breaking them.
I will say this, after riding it several times the past few days, I'm very happy with it.
I will say this, after riding it several times the past few days, I'm very happy with it.