bblair

Does anyone have a source for Wahoo Elemnt handlebar mounts for older, 26mm? Nothing online with either Wahoo or K-edge. I have a couple of old bikes that I'd like to use the computer on.

Koyote

Weird. Tried to mount my Bolt on my '03 LeMond today, and I've got the same question.

bblair

I sent an inquiry to both Wahoo and K-edge but have not heard back. My LBS was puzzled too about the size, but there must be tons of riders out there with less than current bikes. Frustrating.

Steve B.

The mounts are usually sized for the newer bar standard of 31.8. Typically I use rubber shims to make it work on older bars.

bblair

I tried that, but it flopped around too much. On a bumpy road it was all over the place. Maybe I need to use something not so flexible, like the old tube or bar tape that I tried.

Steve B.

Or a thicker shim. I use the shims that come with assorted lights, I add electrical tape as needed. Old inner tube works as well.

bblair

From Wahoo:
"Thanks for contacting Wahoo Fitness. Our out the front mounts are only compatible with 31.8mm handlebars, however you can still use the stem out with the zip ties on other diameter bars. I would recommend you look for third party options such as K-Edge for a mount that fits 26mm diameter bars. Let us know if you have any other questions."

Haven't heard from K-edge and there are some knock off on Amazon and e-bay. Those worry me a little as I have heard stories of them breaking.

surak

Are there any Garmin mounts for that diameter? You can always just get a Wahoo to Garmin adapter puck and then use any Garmin-compatible mount.

Koyote

Yeah, I did that on one bike. The stem mount doesn't sit flush with the thinner handlebar, but it works. Just looks kind like a kludge.