In praise of gugie
02-25-23, 02:32 PM
#1
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,765
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1762 Post(s)
Liked 2,876 Times
in
1,344 Posts
In praise of gugie
This bike is nowhere near done but I will probably tour a bit with it like this... Plus bottle cages. Thing is it's going to be the lightest touring rig I've ever had. Gugie 650b-a-fied my Austro Daimler and it feels wonderful!
So light I don't mind using a flyer!
The ancient mirror is excellent.
Campy front mech was the only thing that worked up here, that I had.
Was going to use a Vx but I had this in the stash.
An ancient tail light with a peter white conversion bulb.
So light I don't mind using a flyer!
The ancient mirror is excellent.
Campy front mech was the only thing that worked up here, that I had.
Was going to use a Vx but I had this in the stash.
An ancient tail light with a peter white conversion bulb.
Likes For 52telecaster:
abshipp, Andy Antipas, Andy_K, ascherer, beicster, Bianchigirll, bulgie, Clang, clubman, cudak888, daverup, dedhed, dmark, Drillium Dude, dukeofearl, ehcoplex, El Chaba, georges1, gugie, JulesCW, Kilroy1988, Korina, merziac, Murray Missile, northbend, pastorbobnlnh, rccardr, scarlson, Soody, SpeedofLite, squirtdad, steelbikeguy, Straightblock, SwimmerMike, ThermionicScott, unworthy1, USAZorro, Velo Mule, VRJAKE, Whit51, zookster
Likes For JulesCW:
02-25-23, 05:33 PM
#4
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,765
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1762 Post(s)
Liked 2,876 Times
in
1,344 Posts
02-25-23, 06:09 PM
#5
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,012
Mentioned: 81 Post(s)
Tagged: 0 Thread(s)
Quoted: 1614 Post(s)
Liked 2,686 Times
in
1,287 Posts
so I'm assuming that Gugie added the braze-on's for the brakes, the Tubus Tara front rack (great rack! I've got one too), and the mini-rack up front? Looks like there might have been a right rear drop-out replaced too?
Love the Stronglight crank arms.. that old logo is just so classic!
What the heck is that big sprocket in back? 52T?
You're in central Illinois, and everyone knows that there aren't any hills. (just river valleys, though).
... unless you count "rolling hills", like Jubilee-Brimfield road... which, on a light bike, is almost like riding a roller coaster!
Steve in Peoria
Love the Stronglight crank arms.. that old logo is just so classic!
What the heck is that big sprocket in back? 52T?
You're in central Illinois, and everyone knows that there aren't any hills. (just river valleys, though).
... unless you count "rolling hills", like Jubilee-Brimfield road... which, on a light bike, is almost like riding a roller coaster!
Steve in Peoria
Likes For steelbikeguy:
02-25-23, 06:21 PM
#6
Senior Member
Join Date: Dec 2005
Posts: 16,534
Mentioned: 449 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 5,374 Times
in
2,198 Posts
Likes For nlerner:
02-25-23, 06:31 PM
#7
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,394
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2586 Post(s)
Liked 4,794 Times
in
1,702 Posts
I must not have received a modification as extensive as you; your bike is now obviously leagues faster than my 'Gugificazione', judging by the way your chainstay decal is being blown of bit by bit 
Perhaps some clearcoat is in order? But then you'd lose braggin' rights...
DD
Perhaps some clearcoat is in order? But then you'd lose braggin' rights...
DD
Likes For Drillium Dude:
02-25-23, 07:04 PM
#8
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,232
Bikes: It's complicated.
Mentioned: 1245 Post(s)
Tagged: 0 Thread(s)
Quoted: 4431 Post(s)
Liked 4,793 Times
in
1,995 Posts
I was excited when Russell told me he was planning on taking a trip that included a stop in Portlandia to drop off his frame and get a ride in last summer. Also honored that he'd trust the Bike Butcher of Portland do a 659b conversion.
Here's the Flickr album that shows all the mods.
Here's the Flickr album that shows all the mods.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
02-25-23, 07:11 PM
#9
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 12,563
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 277 Post(s)
Tagged: 0 Thread(s)
Quoted: 3505 Post(s)
Liked 3,716 Times
in
1,791 Posts
The (self confessed) Bike Butcher of Portland?
an Italian, butchering British and Austrian and other fine brands.....
must be a conspiracy, to raise the status of Italian racers.
'Communing' with steel
an Italian, butchering British and Austrian and other fine brands.....
must be a conspiracy, to raise the status of Italian racers.
'Communing' with steel
Last edited by Wildwood; 02-25-23 at 07:20 PM.
Likes For Wildwood:
02-25-23, 07:41 PM
#10
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,456
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 858 Post(s)
Liked 1,717 Times
in
754 Posts
Hit me up for some bolts if you don't have any, or a source local to you. If you do need some, please measure one of your existing spacers for me. They came in a number of different thicknesses. A measurement to the nearest half-millimeter is good enough, no micrometer required.
Mark B in Seattle
Likes For bulgie:
02-25-23, 08:03 PM
#11
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 11,857
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 120 Post(s)
Tagged: 0 Thread(s)
Quoted: 4155 Post(s)
Liked 3,145 Times
in
2,042 Posts
Could it be that adding 3 more chainring bolts is part of the work that's scheduled?Lots of chainrings do fine with only 3 bolts, but TA rings are built pretty light, might be best to fill all 6 of the holes if "heavy pedaling" is expected. I actually managed to crunch a TA inner that was attached at only 3 points once, but that was mountain biking. Fairly extreme pedaling at the time, trying "with all my might" to clear some obstacle. Maybe more sedate road riding would be 100% fine.
Hit me up for some bolts if you don't have any, or a source local to you. If you do need some, please measure one of your existing spacers for me. They came in a number of different thicknesses. A measurement to the nearest half-millimeter is good enough, no micrometer required.
Mark B in Seattle
Hit me up for some bolts if you don't have any, or a source local to you. If you do need some, please measure one of your existing spacers for me. They came in a number of different thicknesses. A measurement to the nearest half-millimeter is good enough, no micrometer required.
Mark B in Seattle
Likes For 79pmooney:
Likes For Andy Antipas:
02-25-23, 08:10 PM
#13
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,394
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2586 Post(s)
Liked 4,794 Times
in
1,702 Posts
Likes For Drillium Dude:
02-25-23, 08:19 PM
#14
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,232
Bikes: It's complicated.
Mentioned: 1245 Post(s)
Tagged: 0 Thread(s)
Quoted: 4431 Post(s)
Liked 4,793 Times
in
1,995 Posts
gugie how many Gugificazione 650b conversions populate the world these days?
Well, nine is greater than zero, so it's gotta be faster.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
02-25-23, 08:42 PM
#15
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,394
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2586 Post(s)
Liked 4,794 Times
in
1,702 Posts
Likes For Drillium Dude:
02-25-23, 09:06 PM
#16
Senior Member
Join Date: Jun 2021
Posts: 1,502
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 620 Post(s)
Liked 1,196 Times
in
591 Posts
Likes For AdventureManCO:
02-25-23, 09:21 PM
#18
Full Member
Join Date: Sep 2011
Location: Durango, CO
Posts: 470
Bikes: too many old steel bikes
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 836 Times
in
162 Posts
Snow, Ice, and Salt oh my
Man, where I live snow = salt, and that photo is just going to give me nightmares! Heck, it warmed and dried up enough a week or so ago I managed to get in some riding- but now the 2 bikes I took out have a fine layer of salty sand-dust all over them. The OCD is screaming at me that I have to completely dismantle, clean & relube everything now! Has to happen to one of them to paint the frame- I'm hoping that scratches the itch. But man, road salt is a sin on so many levels.
Because of its rarity, I'm counting on this bike becoming a valuable commodity that I can cash in and buy that grass hut in Tahiti when I retire ( gugie )
Likes For Andy Antipas:
02-25-23, 09:56 PM
#19
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,765
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1762 Post(s)
Liked 2,876 Times
in
1,344 Posts
so I'm assuming that Gugie added the braze-on's for the brakes, the Tubus Tara front rack (great rack! I've got one too), and the mini-rack up front? Looks like there might have been a right rear drop-out replaced too?
Love the Stronglight crank arms.. that old logo is just so classic!
What the heck is that big sprocket in back? 52T?
You're in central Illinois, and everyone knows that there aren't any hills. (just river valleys, though).
... unless you count "rolling hills", like Jubilee-Brimfield road... which, on a light bike, is almost like riding a roller coaster!
Steve in Peoria
Love the Stronglight crank arms.. that old logo is just so classic!
What the heck is that big sprocket in back? 52T?
You're in central Illinois, and everyone knows that there aren't any hills. (just river valleys, though).
... unless you count "rolling hills", like Jubilee-Brimfield road... which, on a light bike, is almost like riding a roller coaster!
Steve in Peoria
Likes For 52telecaster:
02-25-23, 10:00 PM
#20
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,765
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1762 Post(s)
Liked 2,876 Times
in
1,344 Posts
Could it be that adding 3 more chainring bolts is part of the work that's scheduled?Lots of chainrings do fine with only 3 bolts, but TA rings are built pretty light, might be best to fill all 6 of the holes if "heavy pedaling" is expected. I actually managed to crunch a TA inner that was attached at only 3 points once, but that was mountain biking. Fairly extreme pedaling at the time, trying "with all my might" to clear some obstacle. Maybe more sedate road riding would be 100% fine.
Hit me up for some bolts if you don't have any, or a source local to you. If you do need some, please measure one of your existing spacers for me. They came in a number of different thicknesses. A measurement to the nearest half-millimeter is good enough, no micrometer required.
Mark B in Seattle
Hit me up for some bolts if you don't have any, or a source local to you. If you do need some, please measure one of your existing spacers for me. They came in a number of different thicknesses. A measurement to the nearest half-millimeter is good enough, no micrometer required.
Mark B in Seattle
02-25-23, 10:03 PM
#21
ambulatory senior
Thread Starter
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,765
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 1762 Post(s)
Liked 2,876 Times
in
1,344 Posts
I was excited when Russell told me he was planning on taking a trip that included a stop in Portlandia to drop off his frame and get a ride in last summer. Also honored that he'd trust the Bike Butcher of Portland do a 659b conversion.
Here's the Flickr album that shows all the mods.
Here's the Flickr album that shows all the mods.
02-26-23, 06:17 AM
#22
Not lost wanderer.
Join Date: Jan 2013
Location: Kampong Cham, Cambodia but I have quite a few in Lancaster, PA
Posts: 3,210
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 841 Post(s)
Liked 864 Times
in
456 Posts
gugie's work
Trial built
As I built it!
Mafac and Dura-Ace.
__________________
Cambodia bikes, 85 Gazelle Opafiets market, A Big BMX 29r, Maxwell All-road, Bridgestone SRAM 2 speed, 2012 Fuji Stratos, 72 Gugieficazione Witcomb.
Cambodia bikes, 85 Gazelle Opafiets market, A Big BMX 29r, Maxwell All-road, Bridgestone SRAM 2 speed, 2012 Fuji Stratos, 72 Gugieficazione Witcomb.
Likes For bwilli88:
02-26-23, 09:11 AM
#23
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,470
Bikes: Bob Jackson, Wizard, Pegoretti Duende, Merckx ProSLX, Pelizzoli, Cannondale ST, Schwinn Tempo, Schwinn Voyageur, Canyon Endurace, Richard Sachs, Davidson Discovery
Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1999 Post(s)
Liked 2,635 Times
in
979 Posts
Gugie had a hand in this one, an '87 Schwinn Voyageur brought back from the rusty dead. Nicknamed Schwinderella, circa 2017.
650b Voy right side by Doc Mertes, on Flickr
650b Voy right side by Doc Mertes, on Flickr
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
02-26-23, 07:30 PM
#24
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,394
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2586 Post(s)
Liked 4,794 Times
in
1,702 Posts
Since this appears to have become a 'Share Your Gugificazione' thread, I'll make a small contribution.
Mark added a second set of bottle cage bosses on the seat tube, filled in the internal brake cable guide holes on the top tube and added external guides (note they're offset to 11 o'clock). He also filled in the holes for the internally-routed gear cables, adding external gear lever bosses and a pair of Campy guides on top of the shell as well as a diver's helmet stop on the chainstay for good measure:
After the torch-work, he took the frame and fork to be media blasted, resulting a beautiful, even matte finish. I wanted to keep that look, so clear-coated the frame with matte Krylon clear.
In this close-up, you can see the clean brazing around the edges of the Campy guide, and just make out the plugged hole the FD cable used to emerge from in the original, internally routed configuration:
Of course it carries the 'Seal of Approval'; note the exclamation point is absent - the tiny dent wouldn't allow it to lay flat and stay stuck. Oh, well:
Apres-Cino, 2021 - exactly the type of ride I had in mind when pitching my vision to Mark:
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
Mark added a second set of bottle cage bosses on the seat tube, filled in the internal brake cable guide holes on the top tube and added external guides (note they're offset to 11 o'clock). He also filled in the holes for the internally-routed gear cables, adding external gear lever bosses and a pair of Campy guides on top of the shell as well as a diver's helmet stop on the chainstay for good measure:
After the torch-work, he took the frame and fork to be media blasted, resulting a beautiful, even matte finish. I wanted to keep that look, so clear-coated the frame with matte Krylon clear.
In this close-up, you can see the clean brazing around the edges of the Campy guide, and just make out the plugged hole the FD cable used to emerge from in the original, internally routed configuration:
Of course it carries the 'Seal of Approval'; note the exclamation point is absent - the tiny dent wouldn't allow it to lay flat and stay stuck. Oh, well:
Apres-Cino, 2021 - exactly the type of ride I had in mind when pitching my vision to Mark:
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
Likes For Drillium Dude:
02-26-23, 10:26 PM
#25
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,232
Bikes: It's complicated.
Mentioned: 1245 Post(s)
Tagged: 0 Thread(s)
Quoted: 4431 Post(s)
Liked 4,793 Times
in
1,995 Posts
Apres-Cino, 2021 - exactly the type of ride I had in mind when pitching my vision to Mark:
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
The bike currently resides in his garage, patiently awaiting the next Cino. Fingers crossed, that will be July of this year; it'll be nice to get reacquainted with this bike - and get a gander at how the patina is developing!
DD
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
