Going really fast on pavement, with off-road tires - yikes
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,485 Times
in
870 Posts
Going really fast on pavement, with off-road tires - yikes
Anyone else experience this?
I had a huge tailwind on the second half of my ride today, and was hitting 35-40mp at times with some fast spinning (110-120rpm). I was running 33mm Donnely MXP tires at around 40psi (so pretty spongey) and wow... they were all over the place at those speeds. Downright terrifying. 40psi is good for off-road (these are tubed clinchers, so 35psi is about as low as I go with them) but maybe a little low for pavement I guess.
Even on a flat/straight road I felt like the rear was squirming back and forth with every pedal stroke any time I got north of 30mph. I was having fun spinning up and trying to hit top speeds, but a few times just stopped pedaling and coasted because I was worried I'd bite it.
These tires are great on gravel and hardpack dirt, and generally feel like they roll pretty fast on pavement (relative to other knobby tires), but today has me second guessing them for faster rides. I've been mostly riding Conti GP5000's lately so maybe I just am not used to the change and wasn't ready for it.
I had a huge tailwind on the second half of my ride today, and was hitting 35-40mp at times with some fast spinning (110-120rpm). I was running 33mm Donnely MXP tires at around 40psi (so pretty spongey) and wow... they were all over the place at those speeds. Downright terrifying. 40psi is good for off-road (these are tubed clinchers, so 35psi is about as low as I go with them) but maybe a little low for pavement I guess.
Even on a flat/straight road I felt like the rear was squirming back and forth with every pedal stroke any time I got north of 30mph. I was having fun spinning up and trying to hit top speeds, but a few times just stopped pedaling and coasted because I was worried I'd bite it.
These tires are great on gravel and hardpack dirt, and generally feel like they roll pretty fast on pavement (relative to other knobby tires), but today has me second guessing them for faster rides. I've been mostly riding Conti GP5000's lately so maybe I just am not used to the change and wasn't ready for it.
#2
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
I'm probably riding 45-60psi in that size. Still, I'll do 30+mph at 25psi on those rims with the right tires.
Obviously your sidewall is gonna get spongy, which isn't a bad thing on gravel as you don't have the traction anyway.
That and of course the knobs are going to make the tires feel squirrely at those speeds, so two hits against ya.
I once made an ebike with Panaracer fire tires. Looked nice, but was pretty spongy at speed on the road (that and knobby tires pick up a lot of junk on the roads that leads to flats).
Obviously your sidewall is gonna get spongy, which isn't a bad thing on gravel as you don't have the traction anyway.
That and of course the knobs are going to make the tires feel squirrely at those speeds, so two hits against ya.
I once made an ebike with Panaracer fire tires. Looked nice, but was pretty spongy at speed on the road (that and knobby tires pick up a lot of junk on the roads that leads to flats).
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
I ride 38mm tires on gravel and down around 20 psi feels good on gravel, but scary while cornering. 30-40 feels fine at whatever speed. Not sure I would ride a 32mm at 40psi, because it would bottom out for me.
Likes For unterhausen:
#5
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
Probably the large knobs. I haven't had any issues going fast on smaller knob gravel tires, or the Pathfinders I have now, which have a solid block in the middle for pavement.
#6
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,485 Times
in
870 Posts
Thinking about this in combo with another thread, I realize the carbon rims I'm using with these tires are only 19mm internal, which is probably why the tires are feeling so squirmy at speed.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
#7
Senior Member
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,848
Bikes: Schwinn Varsity
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 742 Times
in
422 Posts
No, rim width is not your problem. I'd rather ride a 19mm internal width on pavement with that size tire... will make the tire rounder.
Your tire pressure was way too low. 60 psi would have been right.
Your tire pressure was way too low. 60 psi would have been right.
#9
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
Thinking about this in combo with another thread, I realize the carbon rims I'm using with these tires are only 19mm internal, which is probably why the tires are feeling so squirmy at speed.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
#10
Senior Member
Join Date: Jul 2010
Location: Michigan
Posts: 4,863
Bikes: too many of all kinds
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times
in
335 Posts
Thinking about this in combo with another thread, I realize the carbon rims I'm using with these tires are only 19mm internal, which is probably why the tires are feeling so squirmy at speed.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
This is on my old bike, which is rim brake. I typically use a wider alloy wheelset for CX tires (21mm internal) but one of the hubs has a problem on that wheelset. Not wanting to spend money to fix it, I decided to swap CX tires onto the carbon road wheels, and may have inadvertently discovered a reason why this isn't a great idea.
#11
Life Feeds On Life
Join Date: Jan 2018
Location: Hondo,Texas
Posts: 2,143
Bikes: Too many Motobecanes
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 4422 Post(s)
Liked 4,526 Times
in
3,028 Posts
I run 38s at 70 psi both on pavement and gravel. A little rough on gravel sections but not too bad. If I was strictly on gravel I would lower the air pressure.
#12
Senior Member
Join Date: Sep 2012
Location: SoCal
Posts: 1,186
Bikes: 2016 Surly Cross Check, 2019 Kona Rove ST
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 284 Post(s)
Liked 313 Times
in
211 Posts
I hit 30 mph on the road on my WTB Ventures 47mm tubeless quite often - all the way back to my house is a long winding descent on the road. No issues, not squirrelly at all. They're more of a file tread with some slight knobbies on the sides, so that may be a factor.
#13
Senior Member
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
Agreed. 100% this is due to the tread pattern. (and 35 psi tubed is way too low).
Like others I've hit 40+ mph routinely on a variety of small knob tires over the years with never a hint of instability.
Like others I've hit 40+ mph routinely on a variety of small knob tires over the years with never a hint of instability.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Last edited by shoota; 10-18-20 at 07:57 PM.
#14
Senior Member
#15
Senior Member
Ain't physics a b*tch, eh?
#16
Senior Member
I ride Wtb Horizon 650b on gravel and tarmac, With 60 psi they are absolutely useless on singletrack but they are great on roads of every kind. No problems going fast downhill either.
#17
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
Yeah, too low of a pressure for road. 40 PSI on 32s on a road surface and I would be all over the place.
Best to either run a little higher for the whole ride or stop and add air when you get on the road surface. I typically run 32s at 50-55 front and 55-60 rear which is plenty for 200 lbs of bike and rider. A bit more than needed for a crushed stone trail, but my rides always have a road component.
Otto
Best to either run a little higher for the whole ride or stop and add air when you get on the road surface. I typically run 32s at 50-55 front and 55-60 rear which is plenty for 200 lbs of bike and rider. A bit more than needed for a crushed stone trail, but my rides always have a road component.
Otto
#18
Junior Member
Join Date: Dec 2020
Location: Perth WA
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
All about the pressure. I spent a winter on 2.05" ice spiker pros. Pumped them all the way up to 50 psi for paved rides, the sound they make above 40km/hr is amazing. Sounds like the end of the world.
#19
Senior Member
Join Date: Sep 2017
Posts: 7,879
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,963 Times
in
4,688 Posts
No problems here, with tubeless tires up to 43mm wide at pressures as low as 30psi.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
#20
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,440
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3141 Post(s)
Liked 1,707 Times
in
1,031 Posts
That’s the tire I’m running, too, 650b x 47c at 60psi for dirt roads and pavement. Runs along pretty damn good and feels great everywhere, and while I’ve not been over 31mph on them yet (I don’t think), I wouldn’t expect any problems...my 230lbs butt keeps things anchored to the road pretty good!
#21
Senior Member
No problems here, with tubeless tires up to 43mm wide at pressures as low as 30psi.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
#22
Senior Member
Join Date: Sep 2017
Posts: 7,879
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,963 Times
in
4,688 Posts
No problems here, with tubeless tires up to 43mm wide at pressures as low as 30psi.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
On one of my bikes, I am running 35mm slicks tubeless, and the pressure (if I haven't topped it up in a few days) is often <40psi. I hit 40mph on pretty much every ride, and they handle just fine.
#23
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,440
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3141 Post(s)
Liked 1,707 Times
in
1,031 Posts
Likes For chaadster:
#24
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,799
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,024 Times
in
723 Posts
I run Clement xplor which are now the Donnelly xplor in a 35 and I run them about 60/65psi front/rear; never had an issue at any speed on those tires. Had a torturous ride into the wind at 11mph and turning around had no trouble keeping 40 with the wind shoving me along, was a lot of fun with no squirm. For gravel I drop it to 55/60 and find it to be fine on the cinder and packed gravel I run across.
#25
Senior Member
I don't actually know what you do. But I do know what you don't do. And you don't A) ride 40 MPH on a flat surface (under your own power that is...), or B) corner anything other than a very wiiiide turn at 40 MPH (going down hill, of course).
Am I wrong?
Am I wrong?