What's someone gotta do to find a nice 80's touring bike?!
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Posts: 86
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What's someone gotta do to find a nice 80's touring bike?!
So I've been looking for a new touring bike for about a month now. I've been checking craigslist (even the cities 180 miles away from me), ebay, local ads, local used bike sellers, local bike shops, and I've checked out two bikes so far and they just didn't fit. Does anyone in the Los Angeles area know any places I should check out? I'm looking for an 80's touring bike, Univega Specialissima's, Miyata's, Schwinn's, I'm even considering the Surly long haul's too. I'm 5'10.5" with a 34" inseam so I'm around a 57cm ideally. I just bought a Univega Specialissima frame last night but found a dent in the top tube so I'm returning it today. Help a brotha out! I really want to get in a trip at least to San Francisco before the weather turns crappy. I'm AMAZED at how NO ONE rides touring bikes around here. It's really lame.
#2
Senior Member
Join Date: Sep 2004
Location: Wheat Ridge, CO
Posts: 1,076
Bikes: '93 Bridgestone MB-3, '88 Marinoni road bike, '00 Marinoni Piuma, '01 Riv A/R
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thrift stores in nicer/higher priced neighborhoods? A co-worker picked up a really nice Miyata for $20 that way.
Are you sure you want a frame that small? I'm shorter than you and ride a 58 cm c-c.
Are you sure you want a frame that small? I'm shorter than you and ride a 58 cm c-c.
#4
Real Men Ride Ordinaries
Join Date: Sep 2008
Posts: 3,723
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I'm surprised that you've had such poor luck. My last few bike purchases were made by posting a 'Wanted to buy' add on my local craigslist. I've gotten responses even when I post a specific model, size and year range. It's amazing that there were several people in my area with a trek 620 in 61cm made between 1980 and 1985.
#6
Senior Member
Join Date: Sep 2008
Posts: 5,200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Likes: 0
Liked 81 Times
in
64 Posts
34" inseam? sounds like a 58cm. Either way get a Surly Cross Check. More solid than 80's touring bikes and if you put the rear wheel near the back of the dropouts it's just as long. I'd much rather get a new CC than a 20yr old bike.
#7
Senior Member
Join Date: Oct 2004
Location: Toronto, Ontario
Posts: 1,744
Bikes: Miele Azsora, Kuwahara Cascade
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Anyway, back to the OP. Touring bikes are kind of a hot market right now. If you're not having luck on CL, I would turn to eBay. There's usually at least a few posted there, and 58cm is not an uncommon size.
You may need to familiarize yourself with more 1980's Japanese touring models and expand your search. I highly suggest you do a search (and maybe make a post) in Classic and Vintage. We love old tourers there and somewhere there's a big list of the "classic" tourers.
#8
Professional Fuss-Budget
Otherwise, and especially if you don't have the requisite mechanical skills, a used bike can easily turn into a money pit.
And, of course, there's always the question of which is worth more: Your money or your time. If you actively enjoy working on bikes it's time well spent; otherwise it's time you could, oh... spend riding your bike perhaps?
#9
Senior Member
Thread Starter
Join Date: Feb 2010
Posts: 86
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the tips guys, I decided I'm going to keep this Univega Specialissima. The dent is very small and merely cosmetic. I'm going to do a full restoration and just bondo up that dent before painting. I'll definitely post a thread showing extensive before and after pics. It should be a beaut! Plans are the Univega metallic gun metal for the frame/fenders with dark brown brooks saddle/bar tape, noodle bars, bar end shifters, suntour derailleurs, and some nice 36 spoke box rims laced to some tasty phil woods.
I would have to agree with Bacciagalupe that fixing an old bike up can cost just as much as buying a newer modern bike. I paid $100 for my frame/fork/headset/brakes/sr triple crank/seatpost and by the time I'm done getting the whole thing running with paint and all, at LEAST $800 will have been spent. I'd rather have a pristine 70s/80s bike than a pristine modern one. Nothing like getting those classics and taking them back in time. B)
I would have to agree with Bacciagalupe that fixing an old bike up can cost just as much as buying a newer modern bike. I paid $100 for my frame/fork/headset/brakes/sr triple crank/seatpost and by the time I'm done getting the whole thing running with paint and all, at LEAST $800 will have been spent. I'd rather have a pristine 70s/80s bike than a pristine modern one. Nothing like getting those classics and taking them back in time. B)
#10
Senior Member
I used to live in San Diego and there are two very good used bike shops there that carry a lot of classic touring rigs. I have seen Miyatas, 520s, specialized, and panasonics there. The owner at Velo Cult goes out of his way to find good touring frames and fixes them up with all new components. They usually run around 400-500. Ye Ole Bicycle shop sells other nice used bikes but they do not tend to have a lot of touring stuff. Look them up and give them and call to see whats in stock. I think that Velo Cult has a website with pictures.
Edit: I found their website for you. https://www.velocult.com/index.php/store/
Also, looks like the prices have gone up since I visited last.
Edit: I found their website for you. https://www.velocult.com/index.php/store/
Also, looks like the prices have gone up since I visited last.
Last edited by zeppinger; 09-26-10 at 06:55 PM.
#11
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
I've been watching also and the Miyata's and Trek's show up on CL pretty frequently - at least in the NW. But, they also disappear off CL pretty quicly. What I have noticed is the Nishiki, Univega, Bianchi Volpe, etc. seem to last a little longer. The ones that have lasted the longest are the REI Novara brand - and they can be had for a pretty decent price.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#12
Senior Member
Wow anyone else think these are really cool looking? https://www.velocult.com/index.php/st...way_1_pannier/
#13
Senior Member
Join Date: Sep 2008
Posts: 5,200
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Likes: 0
Liked 81 Times
in
64 Posts
I had, rode and sold 80's touring bikes when I had a shop. The only oversized tubing back then was very thin steel tubing on some racing bikes and heavy tubing on mtn. bikes. From bare frame the op is going to have a bike that can't take as large of tires as the CC, has 126mm rear triangle and will require a total component package.
#14
Banned
You could Buy one of Bruce Gordons lugged construction touring bikes
and a set of his racks, frame and racks made for each other..
and have style and design going for you and get the Fit right.
Or get a 30 year old thing and hope the fit is right.
Or you can get the Tig welded stuff Bruce has something to offer in that niche too.
He's been building touring bikes since the 70's..
this year a import contract model to compete in price with LHT,
but offers a nicer parts pick, I'd say..
and a set of his racks, frame and racks made for each other..
and have style and design going for you and get the Fit right.
Or get a 30 year old thing and hope the fit is right.
Or you can get the Tig welded stuff Bruce has something to offer in that niche too.
He's been building touring bikes since the 70's..
this year a import contract model to compete in price with LHT,
but offers a nicer parts pick, I'd say..
Last edited by fietsbob; 09-27-10 at 09:14 AM.
#15
Senior Member
Join Date: Sep 2009
Location: Up
Posts: 4,695
Bikes: Masi, Giant TCR, Eisentraut (retired), Jamis Aurora Elite, Zullo, Cannondale, 84 & 93 Stumpjumpers, Waterford, Tern D8, Bianchi, Gunner Roadie, Serotta, Serotta Duette, was gifted a Diamond Back
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 305 Post(s)
Liked 2,038 Times
in
604 Posts
+1 I really like the Gordons too, but I would also look at the Gunnar's Grand Tour.