Single or not to be single?
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Single or not to be single?
Hi there.
I've been commuting in London for the last 2 years on a hybrid.... I'm looking to switch as the riding angle and style of the bike doesn't work for me. It's far too upright ( which is a ***** on a windy day ), and it doesn't give me the right movement on hills either. I like to get out of the seat and think a road bike frame will improve this. I took out two sprockets as i was hardly using most of the lower gearing too. It worked well and made me look into single' a lot more. I ride about 20 miles a day.
The choices i'm looking at is a full road bike or a road bike styled single speed. Anyone got any good advice out there on this subject or has made the switch? Also, how is it commuting on a fixed wheel? I like the idea of it a lot and it's simplicity, especially when it comes to maintenance during the winter which i also found a ball ache.
Are full road bikes ok to live with all year round commuting, and do they work for the task of getting around London?
I was looking at the Wilier Pista and the new Felt Footprint.
Cheers,
J.
I've been commuting in London for the last 2 years on a hybrid.... I'm looking to switch as the riding angle and style of the bike doesn't work for me. It's far too upright ( which is a ***** on a windy day ), and it doesn't give me the right movement on hills either. I like to get out of the seat and think a road bike frame will improve this. I took out two sprockets as i was hardly using most of the lower gearing too. It worked well and made me look into single' a lot more. I ride about 20 miles a day.
The choices i'm looking at is a full road bike or a road bike styled single speed. Anyone got any good advice out there on this subject or has made the switch? Also, how is it commuting on a fixed wheel? I like the idea of it a lot and it's simplicity, especially when it comes to maintenance during the winter which i also found a ball ache.
Are full road bikes ok to live with all year round commuting, and do they work for the task of getting around London?
I was looking at the Wilier Pista and the new Felt Footprint.
Cheers,
J.
#2
Senior Member
Join Date: Jun 2005
Location: Iceland
Posts: 273
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi,
Welcome to the forums.
I'm not the right person to answer your questions, but I'll pitch in just because I'm on a similar time-zone.
I really love all my gears, but I have serious hills (and only hills, no flats). I haven't ridden a SS since I was a kid. But you do mention all the correct reasons for looking into SS/FG, i.e. quite flat landscape (if I remember correctly), quite high mileage, willingness to stand up from the saddle from time to time and pray for being relived from future maintenance.
My suggestion is that you look here for a cheap used bike to have a peek into the SS/FG world, before you spend your savings on a new bike. Just remember that bike fit is important, and more so if you pedal with power. It's hard to find reliable advice on bike fit over the internet, so when you have made up your mind on which way to go, you should visit a good bike shop for advice on this.
Welcome to the forums.
I'm not the right person to answer your questions, but I'll pitch in just because I'm on a similar time-zone.
I really love all my gears, but I have serious hills (and only hills, no flats). I haven't ridden a SS since I was a kid. But you do mention all the correct reasons for looking into SS/FG, i.e. quite flat landscape (if I remember correctly), quite high mileage, willingness to stand up from the saddle from time to time and pray for being relived from future maintenance.
My suggestion is that you look here for a cheap used bike to have a peek into the SS/FG world, before you spend your savings on a new bike. Just remember that bike fit is important, and more so if you pedal with power. It's hard to find reliable advice on bike fit over the internet, so when you have made up your mind on which way to go, you should visit a good bike shop for advice on this.
__________________
My advice is free of charge and of respective quality.
1982 Miyata 912
1998 Wheeler 5900 with front and rear air cushion suspension
2015 Canyon Spectral 7.0 EX
My advice is free of charge and of respective quality.
1982 Miyata 912
1998 Wheeler 5900 with front and rear air cushion suspension
2015 Canyon Spectral 7.0 EX
#3
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,394
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,694 Times
in
2,516 Posts
I have also thought of going with a fixed gear or single speed because of ice. I'll probably be going with a 3 speed internally geared hub instead.
#4
Senior Member
Join Date: Aug 2007
Posts: 2,595
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 352 Times
in
225 Posts
I commute year round on a single speed and I have only tried fixed twice and never in traffic. I am never convinced fixed in the city is good but plenty of people swear by it. So if you buy something make sure it has a flip flop hub so that you can switch.
The reality is you can commute on any bike, some are better than others but even that it is an individual choice. I think a commuter should have room for at least 28c tires to absorb some road shock and most roads are crap to ride on. Fenders should also be a consideration to keep you and your bike clean. As for the two bikes you posted, I personally don't like either of them for commuting. One is a carbon fiber bike which I think makes a lousy material for day to day, locked to sign post, getting scratched and banged around bike. Unless you can bring it inside into your work etc. The Willier which is a nice bike all around doesn't have room for fenders or bigger tires. They would be fun to ride and that would be the trade off.
I am biased because I own one but something like the Masi Speciale Commuter is something worthy of consideration. But as I said, any bike can be a commuter. It all depends on your needs.
I was in downtown London two weeks ago, and I couldn't believe the amount of traffic and how narrow the roads were and to see cyclist sharing it with those buses. I am a well seasoned cyclist in a large metropolitan city and just watching it scared me. I don't know how you guys do it, at least downtown.
The reality is you can commute on any bike, some are better than others but even that it is an individual choice. I think a commuter should have room for at least 28c tires to absorb some road shock and most roads are crap to ride on. Fenders should also be a consideration to keep you and your bike clean. As for the two bikes you posted, I personally don't like either of them for commuting. One is a carbon fiber bike which I think makes a lousy material for day to day, locked to sign post, getting scratched and banged around bike. Unless you can bring it inside into your work etc. The Willier which is a nice bike all around doesn't have room for fenders or bigger tires. They would be fun to ride and that would be the trade off.
I am biased because I own one but something like the Masi Speciale Commuter is something worthy of consideration. But as I said, any bike can be a commuter. It all depends on your needs.
I was in downtown London two weeks ago, and I couldn't believe the amount of traffic and how narrow the roads were and to see cyclist sharing it with those buses. I am a well seasoned cyclist in a large metropolitan city and just watching it scared me. I don't know how you guys do it, at least downtown.
#5
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
Lots of commuters swear by single speeds and fixies. I had one built up a couple years ago for occasional commuting, as a change of pace. It looked great and was a blast to ride, but it did a number on my knees. The roads are pretty hilly where I live and it is often chilly or cold during my morning commute, and I wasn't able to warm up properly on the SS before hitting the hills. Basically you have to charge all the hills on a SS/fixie, and that didn't agree with my knees. I started developing knees pains almost immediately, which I stupidly ignored and didn't attribute to the SS, until the pain got so bad that I ended up in physical therapy and missed two months of riding. I put the gears back on that bike and sold all my SS/fixie parts.
#6
Senior Member
Join Date: Jun 2009
Location: The Path to Fredvana
Posts: 909
Bikes: Long Haul Trucker 2010 , Felt Z90 2008, Rans Rocket 2001, Specialized Hardrock 1989
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
How long and how hilly is your commute? Do you carry much stuff with you? Do you need bike it every day, or just when you want to? These all play a role in your decision.
#8
Senior Member
Join Date: Mar 2006
Posts: 623
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Fixed gear and single speed drive trains can be a lot of fun, especially in the city, and I use both on my flat 30 mi RT commute. However I don't think it's worth spending much money on them, and I wouldn't want one as my only bike. If you do want to start going on longer rides, or riding with a club, it'll hold you back. I've done a century on a single speed (out of necessity, my geared bike was in the shop), and I have no desire to do it again.
Still, I love ss/fg bikes for the city. If I were you, I'd buy a new road bike and cobble together an ss/fg from an older road bike. If you're the slightest bit mechanically inclined, making your own ss/fg from an older road bike is really satisfying and very easy.
Still, I love ss/fg bikes for the city. If I were you, I'd buy a new road bike and cobble together an ss/fg from an older road bike. If you're the slightest bit mechanically inclined, making your own ss/fg from an older road bike is really satisfying and very easy.
#9
commuter and barbarian
Join Date: Oct 2009
Location: Potomac, MT, USA
Posts: 2,494
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I second the notion of getting a flip-flop hub, though I will add that I've ridden mine fixed all along and don't intend to switch to the ss. YMMV, however, and this gives you more options.
It certainly is simpler, what without derailleurs and shifters -- things that don't always do well in the cold. In other words, less chance for ball ache.
I doubt there's much in the way of hills in London. Hills would be one reason either to stick with gears or go ss.
As for the 2 bikes you mentioned (Wilier Pista and the new Felt Footprint), I'd think you could get something for a lot less than either of those, especially if you are willing to settle for used. FG/SS isn't for everyone, so you might want to check it out inexpensively first.
I sure like my FG, and I ride a comparable distance to what you mention.
It certainly is simpler, what without derailleurs and shifters -- things that don't always do well in the cold. In other words, less chance for ball ache.
I doubt there's much in the way of hills in London. Hills would be one reason either to stick with gears or go ss.
As for the 2 bikes you mentioned (Wilier Pista and the new Felt Footprint), I'd think you could get something for a lot less than either of those, especially if you are willing to settle for used. FG/SS isn't for everyone, so you might want to check it out inexpensively first.
I sure like my FG, and I ride a comparable distance to what you mention.
#10
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
It definitely depends on how steep your hills are, especially for fixed gear riding. You can gear down low enough to make the hills managable, but on a fixed gear you end up spinning wildly going back down the hill, and on either type you end up needing to spin like crazy to go fast if your gearing is too low. A good way to judge is to coast down your biggest hill and see how fast you end up going without pedaling -- over 25 mph/40 kph and I think gears are in order.
If your route is flat enough, you should definitely give fixed gear a try. It takes a little getting used to, but it's a lot of fun. Just be sensible and install brakes.
If your route is flat enough, you should definitely give fixed gear a try. It takes a little getting used to, but it's a lot of fun. Just be sensible and install brakes.
#11
GATC
Hills don't matter much to my SS/FG experience. I have it geared low enough so I can climb everything I face, and while I do lose some top end going down the other side of a couple of those, it's never enough to cost me a traffic light.
I don't find descending a hassle, FG, one learns to spin, but coasting is fun too. I found the stop/go segments of my commute, especially riding w/ my kids at the beginning or end of the day, more of a hassle w/ FG. I have been flopped over to the freewheel side for a couple months now...
I don't find descending a hassle, FG, one learns to spin, but coasting is fun too. I found the stop/go segments of my commute, especially riding w/ my kids at the beginning or end of the day, more of a hassle w/ FG. I have been flopped over to the freewheel side for a couple months now...
#12
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 550 Post(s)
Liked 325 Times
in
226 Posts
Are full road bikes ok to live with all year round commuting,
- Rack eyelets and chain stays long enough to provide heel clearance on panniers are a great idea, especially if you need to haul along a laptop, wet weather clothes, cold weather clothes, etc.
- You want clearance for fenders if you plan on riding in the rain.
#13
break-beats
Join Date: Dec 2005
Location: Pittsburgh
Posts: 143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I made the switch last night!
I had kinda messed up my derailleur/chain while transporting my bike in the back of my gf's car. It was rideable, but acting weird, then the chain came off the front sprockets yesterday and as I tried to "pedal my chain back on" by adjusting my front derailleur, (which I've done many times) the chain caught and bent the rear derailleur and itself, rendering my bike practically useless.
I don't have the best job right now, so I'm not currently into buying a new rear derailleur, chain and now cogset (I ride all year in all conditions and let the chain and cogset wear together, rather than replace the chain at regular intervals, call it laziness if you wish). I ended up just removing the derailleurs, shifters, cables/housing and cogset, slapping on my ss adapter and cog onto my freewheel, taking out the bent portion and resizing the chain, and voila! a perfectly good rideable single speed. Runs great, and I think it'll even work well here in hilly Pittsburgh with the 42-18 gear combo. You might want something with a little larger ratio for the flatlands.
I had kinda messed up my derailleur/chain while transporting my bike in the back of my gf's car. It was rideable, but acting weird, then the chain came off the front sprockets yesterday and as I tried to "pedal my chain back on" by adjusting my front derailleur, (which I've done many times) the chain caught and bent the rear derailleur and itself, rendering my bike practically useless.
I don't have the best job right now, so I'm not currently into buying a new rear derailleur, chain and now cogset (I ride all year in all conditions and let the chain and cogset wear together, rather than replace the chain at regular intervals, call it laziness if you wish). I ended up just removing the derailleurs, shifters, cables/housing and cogset, slapping on my ss adapter and cog onto my freewheel, taking out the bent portion and resizing the chain, and voila! a perfectly good rideable single speed. Runs great, and I think it'll even work well here in hilly Pittsburgh with the 42-18 gear combo. You might want something with a little larger ratio for the flatlands.
#14
break-beats
Join Date: Dec 2005
Location: Pittsburgh
Posts: 143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I guess my point was that you can get a geared bike and go to SS if you want. It's really not too difficult. But buying all the stuff to go from a dedicated SS bike to a geared bike if you decide to do that in the future (and if the frame you choose even allows it) could be a lot harder. I would go geared out of the gate.
#15
Senior Member
Join Date: Mar 2008
Location: Binghamton, NY
Posts: 2,896
Bikes: Workcycles FR8, 2016 Jamis Coda Comp, 2008 Surly Long Haul Trucker
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Never had a fixed gear so I can't comment on them. During your commute will you be carrying things? Also, like Drew Eckhardt mentioned you want clearance for fenders. The bikes you mentioned don't look like they would provide much room.
For me, commuting bikes should fit a wide variety of tire widths, have room for fenders, and mounting options for racks (rear and/or front). If you are carrying items I think being able to shift gears would be a plus.
For me, commuting bikes should fit a wide variety of tire widths, have room for fenders, and mounting options for racks (rear and/or front). If you are carrying items I think being able to shift gears would be a plus.
#16
Senior Member
Join Date: Jul 2009
Location: Chicago!
Posts: 213
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The two bikes you mention seem extremely track-y. I'd go with a simple road conversion, or a ss/fixed bike with geometry that's a bit more relaxed. Don't know what's available in the UK, but something like a Bianchi San Jose, Redline 925, Raleigh One Way makes the most sense to me. Leave the track bikes for the velodrome.
I agree with the above commenters who recommend getting a flip/flop hub - especially if you haven't ridden fixed much before (sounds like you haven't, though I could be wrong). For the record, a hub that is fixed/fixed (threaded for both cog and lockring on both sides) is actually the most flexible, as you can run a standard ss freewheel on the fixed cog threads, giving you the option of fixed/fixed, fixed/free, or free/free. My memories of London don't include much in the way of hills (though it's been a while since I was there), I imagine any standard gearing should do well for you. (46/17 and 44/16 are on my fixed and ss bikes right now for flat Chicago).
I would also second any comments about running brakes, and about having a sensible bike that you can rack and fender easily, as well as fit a reasonable sized tire with those fenders (28 or 32c). And for a fixed gear, foot retention of some kind - clips and straps, clipless, Power Grips, those big goofy velcro things that fixie riders like to put on BMX pedals, whatever. Really, it's helpful.
Converting an old road bike is also pretty easy (sheldonbrown.com can tell you how), and gives you the option to put your derailers back on if you decide you want gears. A bike like the San Jose, 925 or One Way are also reasonably easy to convert to an IGH hub if you want to try a 3,5, or 8 speed in the future. You've got a lot of options, and as long as you hold on to the hybrid you've got a backup bike to use in case you need to make some changes to whatever new ride you end up buying. Have fun!
I agree with the above commenters who recommend getting a flip/flop hub - especially if you haven't ridden fixed much before (sounds like you haven't, though I could be wrong). For the record, a hub that is fixed/fixed (threaded for both cog and lockring on both sides) is actually the most flexible, as you can run a standard ss freewheel on the fixed cog threads, giving you the option of fixed/fixed, fixed/free, or free/free. My memories of London don't include much in the way of hills (though it's been a while since I was there), I imagine any standard gearing should do well for you. (46/17 and 44/16 are on my fixed and ss bikes right now for flat Chicago).
I would also second any comments about running brakes, and about having a sensible bike that you can rack and fender easily, as well as fit a reasonable sized tire with those fenders (28 or 32c). And for a fixed gear, foot retention of some kind - clips and straps, clipless, Power Grips, those big goofy velcro things that fixie riders like to put on BMX pedals, whatever. Really, it's helpful.
Converting an old road bike is also pretty easy (sheldonbrown.com can tell you how), and gives you the option to put your derailers back on if you decide you want gears. A bike like the San Jose, 925 or One Way are also reasonably easy to convert to an IGH hub if you want to try a 3,5, or 8 speed in the future. You've got a lot of options, and as long as you hold on to the hybrid you've got a backup bike to use in case you need to make some changes to whatever new ride you end up buying. Have fun!
#17
This bike is cat approved
Join Date: Mar 2010
Location: Lincoln, NE
Posts: 1,531
Bikes: To many to list...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I considered singlespeed for a while as a commuter and I had a singlespeed bike I really liked to ride but it wasn't really a good bike for commuting. Ultimately I decided gears came in handy with a bike loaded down with fenders, racks, stuff, lights etc and the occasions I pull my trailer its nice to have the lower gearing. Other cases when having gears is good is when its windy. Its not that hilly here and I could go the singlespeed route, but for now I'll take the gears.
Singlespeeds are a blast to ride around though and would be an awesome no frills commuter. If you want to try making the switch purchase a much cheaper singlespeed road bike and give it a whirl.
Adding on to the previous post if you wanted to go cheap you could throw dropbars on your hybrid which would make you more aero and also make it a singlespeed. Doing this might cost a bit of cash, but you might end up with a killer singlespeed cross bike when you are all said and done.
Singlespeeds are a blast to ride around though and would be an awesome no frills commuter. If you want to try making the switch purchase a much cheaper singlespeed road bike and give it a whirl.
Adding on to the previous post if you wanted to go cheap you could throw dropbars on your hybrid which would make you more aero and also make it a singlespeed. Doing this might cost a bit of cash, but you might end up with a killer singlespeed cross bike when you are all said and done.
Last edited by monsterpile; 03-29-11 at 02:41 PM.
#18
Fat Guy Rolling
Join Date: Jul 2008
Location: Louisville Kentucky
Posts: 2,434
Bikes: Bacchetta Agio, 80s Raleigh Record single-speed, Surly Big Dummy
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have an 80s Raleigh Record converted to a single-speed. I do have a flip-flop hub, and I tried fixed for a while. Fixed is different, but caused me knee pain. I still enjoy the simplicity of single-speed though. My single-speed is becoming my primary commuter bike.
As far as "road bike", yeah, mine is an old, lugged-steel, drop-bar, road bike. Being from the 80s, I can fit 700x32 tires (converted from 27" wheels) and fenders. It makes for a comfy ride, and no skunk-stripe.
As far as "road bike", yeah, mine is an old, lugged-steel, drop-bar, road bike. Being from the 80s, I can fit 700x32 tires (converted from 27" wheels) and fenders. It makes for a comfy ride, and no skunk-stripe.
#19
Senior Member
Join Date: Jun 2009
Location: Potashville
Posts: 1,079
Bikes: Reynolds 531P road bike, Rocky Mountain Metropolis, Rocky Mountain Sherpa 10, Look 566
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Can I assume that London means London U.K.? If so, there's a really good magazine called Cycling Active that you might want to look at. They have multiple bike reviews every month and a lot of good advice for commuting.
#20
Senior Member
IMHO - based upon OP's brief info - suggest a cyclocross style bike with 1x9 [8 or 10] gearing. I know the SS/FG trend is popular in urban areas, there are times when a few gears are very nice - when there is a bad head wind or when the powerplant isn't feeling well or carrying an extra load [groceries or beverage]. IGH are nice - probably a trend of their own lately - I have two which work well and are great in traffic - but they are just not as "zippy" as the deraileur set up. The 1x9 set up is pragmatic and reliable for commuting, provides a good range of gears and easy to maintain. The cyclocross or similar bike accepts a wider range of tire sizes, 28-32 mm tires often provide a better ride and less subject to road abuse than 23-25 mm road bike tires. If you go with a road bike, suggest getting one with relaxed geometry vs. racing - easier in traffic and on your body parts & get a good fit.
#21
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
You will have to experiment to find the most appropriate gearing system for your London commute.
I suggest you hunt around for a frame that is compatible with most systems.
Look for a road frame with horizontal rear dropouts. I would also go for one with threaded eyelets for reack and fenders (mudguards). get these even if you dont currently use them, one day you will need them.
My preference is for generous tyre clearances, esp for winter commuting. A frame that takes long-drop calliper brakes can accept narrow or medium 700c tyres (usually up to about 32mm). Cyclo-cross style cantilever brakes can often accept slightly wider but of the 2 systems, I find callipers work better.
Once you find a frame, fit it with any components you like to make a totally custom bike. You may want to dress-down to avoid it becoming a thief magnet. I painted my old steel frame a garish green.
I suggest you hunt around for a frame that is compatible with most systems.
Look for a road frame with horizontal rear dropouts. I would also go for one with threaded eyelets for reack and fenders (mudguards). get these even if you dont currently use them, one day you will need them.
My preference is for generous tyre clearances, esp for winter commuting. A frame that takes long-drop calliper brakes can accept narrow or medium 700c tyres (usually up to about 32mm). Cyclo-cross style cantilever brakes can often accept slightly wider but of the 2 systems, I find callipers work better.
Once you find a frame, fit it with any components you like to make a totally custom bike. You may want to dress-down to avoid it becoming a thief magnet. I painted my old steel frame a garish green.
#22
Senior Member
Join Date: Apr 2005
Posts: 736
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I can't speak for London, but I can speak for riding fixed or single on flat or hilly/mountainous route. I love it. I currently have 3 bikes: a fixed gear Bike Friday Pocket Rocket, a single speed Surly 1X1, & a geared Surly Cross Check. I'm leaving the Cross Check geared but I have been tempted to switch it to single as well. My Pocket Rocket has a flip flop rear wheel fixed on both sides. It is my main commuter as well as my main training ride for fast aggressive groups. Fixed/single in bad weather works really great. That is one reason my 1X1 mountain bike is a single speed. If single speed 100 mile mountain biker racers can complete a mountainous (12,000 -14,000 feet of climbing) course almost as fast as the open racers, then commuting on one can be no problem.
#23
Bike ≠ Car ≠ Ped.
I made a decision about whether to go SS by choosing a gear ratio on my road bike and NEVER changing from it for at least a week.
#24
Senior Member
Join Date: Dec 2010
Location: Tahoe
Posts: 142
Bikes: Motobecane Single Speed, Trek Mountain Track Xtracycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have both an Xtracycle/Trek Mountain Track and a Motobecane Single Speed. No Fixed, not in the mountains with tourists.
I love my single speed for commuting, even up hill. I have a pretty short commute so either works but when I have a lot to carry or its snowing I have to ride the X. On light weight no snow or ice days the single speed is how I roll as its so much faster.
I love my single speed for commuting, even up hill. I have a pretty short commute so either works but when I have a lot to carry or its snowing I have to ride the X. On light weight no snow or ice days the single speed is how I roll as its so much faster.
#25
Junior Member
Join Date: Mar 2011
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Geared bikes are safer than single speed bikes (and much safer than fixies) in traffic, because they can accelerate much faster from a slow speed or standing start (unless you use a single gear of 43" or less, in which case you'll spend most of your ride coasting) . This can be crucial for when making difficult turns, getting away from traffic lights before the cars, or responding to a suddenly perceived danger.
They're also much easier on your knees.
They're also much easier on your knees.