Motobecane BB Woe
#1
Senior Member
Thread Starter
Join Date: Dec 2011
Location: NE Ohio
Posts: 2,595
Bikes: 1992 Serotta Colorado II,Co-Motion Speedster, Giant Escape Hybrid, 1977 Schwinn Super Le Tour
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 455 Post(s)
Likes: 0
Liked 112 Times
in
85 Posts
Motobecane BB Woe
Here is a pic of the "insert" that houses the cartridge BB from a Motobacane Cafe Century. The frame is carbon fiber.
We have this in the shop and we are stumped as to replacement parts as Motobecane has no support whatsoever.
The ID of the BB she'll in the frame is 38mm.
Any thoughts?
Thanks!
We have this in the shop and we are stumped as to replacement parts as Motobecane has no support whatsoever.
The ID of the BB she'll in the frame is 38mm.
Any thoughts?
Thanks!
#3
Really Old Senior Member
We certainly don't want to see a pic of the shell or a close up of the pic you have to see if those are threads or??
You can do better.
You can do better.
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,075
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,859 Times
in
2,307 Posts
Is this the bonded insert (within the carbon frame) that houses the actual BB unit? No surprise about the lack of tech service from an on line company selling a service intensive device. Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Senior Member
The only pf bb standard that's close to that size is Trek BB90, which presses 37mm OD bearings directly into the frame, with bearing stops molded into the shell. What's the inside of the shell look like?
My guess is a bonded iso theaded insert failed. Should be a warranty if so, good luck with that!
My guess is a bonded iso theaded insert failed. Should be a warranty if so, good luck with that!
Last edited by cpach; 07-14-21 at 10:15 PM.
#6
Senior Member
Thread Starter
Join Date: Dec 2011
Location: NE Ohio
Posts: 2,595
Bikes: 1992 Serotta Colorado II,Co-Motion Speedster, Giant Escape Hybrid, 1977 Schwinn Super Le Tour
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 455 Post(s)
Likes: 0
Liked 112 Times
in
85 Posts
CPach & Andy thanks for your replies!
yep it looks like it was bonded to to cf in the shell as there's some remnant of adhesive. Andy,the interior of the BB shell looks quite rough except at the outer edges where it is 38 mm round.
Well tomorrow when I back at the shop I will be giving this fellow the bad news. But today I'm going riding!!
yep it looks like it was bonded to to cf in the shell as there's some remnant of adhesive. Andy,the interior of the BB shell looks quite rough except at the outer edges where it is 38 mm round.
Well tomorrow when I back at the shop I will be giving this fellow the bad news. But today I'm going riding!!