Pedal clips for old Peugeot
#1
Newbie
Thread Starter
Pedal clips for old Peugeot
hello all --
i am interested in some sort of shoe-pedal clip for my antique Peugeot. it appears the most popular route is some sort of shoe and pedal that are specifically made to clip together.
my questions:
1) is the thread pattern in pedals somehow universal? this appears to be the case with my Specialized bicycle but i am concerned about the Peugeot using an odd pedal
2) is there some option to use a more conventional shoe? those shoes built to clip on the pedals dont look like they would make for a very comfortable walking shoe.
i did just purchase these(attached) , but was hoping for a better option. perhaps there is something that attaches to the shoe that can be clipped into a pedal? i am just guessing here.
EDIT: nope not yet allowed to attach (a picture is worth a thousand words, so here goes) - its a plastic piece that screws on the pedal, and then covers the top of the shoe, with a leather strap that holds the shoe on to the pedal.
i have had these before and they can be a little tricky to get your feet into them.
i am interested in some sort of shoe-pedal clip for my antique Peugeot. it appears the most popular route is some sort of shoe and pedal that are specifically made to clip together.
my questions:
1) is the thread pattern in pedals somehow universal? this appears to be the case with my Specialized bicycle but i am concerned about the Peugeot using an odd pedal
2) is there some option to use a more conventional shoe? those shoes built to clip on the pedals dont look like they would make for a very comfortable walking shoe.
i did just purchase these(attached) , but was hoping for a better option. perhaps there is something that attaches to the shoe that can be clipped into a pedal? i am just guessing here.
EDIT: nope not yet allowed to attach (a picture is worth a thousand words, so here goes) - its a plastic piece that screws on the pedal, and then covers the top of the shoe, with a leather strap that holds the shoe on to the pedal.
i have had these before and they can be a little tricky to get your feet into them.
Last edited by edwardsmarkf; 08-31-21 at 03:35 PM.
#2
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
From Sheldon Brown (Bicycle Pedals -- types, installation, Maintenance. (sheldonbrown.com)):
"Older French bicycles used a 14 mm x 1.25 mm thread, but these are quite rare. French-threaded pedals are commonly labeled "D" and G" (French for "droite" and "gauche" (right and left). A French pedal will start to thread into a 9/16 x 20 crank (and vice versa), but will soon bind. Do not force it, or it will damage the crank. Aluminum French cranks are easily rethreaded to 9/16" x 20 TPI"
"Older French bicycles used a 14 mm x 1.25 mm thread, but these are quite rare. French-threaded pedals are commonly labeled "D" and G" (French for "droite" and "gauche" (right and left). A French pedal will start to thread into a 9/16 x 20 crank (and vice versa), but will soon bind. Do not force it, or it will damage the crank. Aluminum French cranks are easily rethreaded to 9/16" x 20 TPI"
#3
Newbie
Thread Starter
Thank you Phil - you just confirmed my suspicion. i get sort of nervous getting into rethreading. if ANYTHING should go wrong, my project suddenly gets infinitely more difficult.
and i dont have any rethreading tools.
and i dont have any rethreading tools.
#4
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,597
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3860 Post(s)
Liked 6,450 Times
in
3,190 Posts
Petal?
Likes For SurferRosa:
#5
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 10,997
Bikes: Yes, please.
Mentioned: 278 Post(s)
Tagged: 0 Thread(s)
Quoted: 2192 Post(s)
Liked 4,580 Times
in
1,762 Posts
WRT question #2: you can't walk on shoes made for clipless pedals. Even if you believe you can, the people around you will think differently.
Classic clips & straps work well with "normal shoes" as long as they meet two conditions:
Classic clips & straps work well with "normal shoes" as long as they meet two conditions:
- they shouldn't be too wide or long (or they just won't fit)
- the soles should be thick/stiff enough (or the pedals will start pressing into your foot soles aftera couple of hours)
#6
Senior Member
Join Date: Jan 2007
Location: Ontario
Posts: 2,648
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Liked 634 Times
in
336 Posts
Question for the original poster: how old do you think your Peugeot is? My late 60s Peugeot used standard pedals….
As to clipless pedals: if you get shoes designed for mountain bikes you can easily walk in them with the cleat installed - mine look like (and basically work like) hiking shoes. You can even get sandals with SPD (shimano style) cleats.
If on the other hand you want to use “regular shoes” you should be looking for “toe clips” which attach to many regular pedals.
As to clipless pedals: if you get shoes designed for mountain bikes you can easily walk in them with the cleat installed - mine look like (and basically work like) hiking shoes. You can even get sandals with SPD (shimano style) cleats.
If on the other hand you want to use “regular shoes” you should be looking for “toe clips” which attach to many regular pedals.
#7
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,842
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2295 Post(s)
Liked 2,042 Times
in
1,251 Posts
Go to this gallery and upload there. Then we can access and repost in the thread.
#10
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,983
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26380 Post(s)
Liked 10,356 Times
in
7,194 Posts
.
...I'm not sure when Peugeot went to standard threading in their crank arms, but it's pretty easy to tell, once you remove a pedal.
French threaded pedals do have the same right hand threading on the drive side, and left hand threading on the non drive side, as do the associated crank arms.
Rethreading them is not a big deal, I've done at least two or three hundred over the years. But if you're anxious about it, it doesn't cost much to hire the job out to someone with more confidence. Standard threading oepns up a whole world off better modern pedals, which is denied to you if you want to stay with French. The job is easier and more securely accomplished with the cranks removed, held in a solid bench vise with non marring jaws, and using a long taper tap, like the ones made and sold by Hozan. there are shorter taps, with less taper, sold more cheaply. But there is more risk of going in at an angle other than the perpendicular 90* angle you desire.
If your bike has steel crank arms, it's a little more labor intensive to rethread them, but it's still doable. Whoever does it for you will charge more for steel arms.
BY 1978, it's possible they wee standard threading in 9/16", but the best way to find out is to remove one of them and check it.
...I'm not sure when Peugeot went to standard threading in their crank arms, but it's pretty easy to tell, once you remove a pedal.
French threaded pedals do have the same right hand threading on the drive side, and left hand threading on the non drive side, as do the associated crank arms.
Rethreading them is not a big deal, I've done at least two or three hundred over the years. But if you're anxious about it, it doesn't cost much to hire the job out to someone with more confidence. Standard threading oepns up a whole world off better modern pedals, which is denied to you if you want to stay with French. The job is easier and more securely accomplished with the cranks removed, held in a solid bench vise with non marring jaws, and using a long taper tap, like the ones made and sold by Hozan. there are shorter taps, with less taper, sold more cheaply. But there is more risk of going in at an angle other than the perpendicular 90* angle you desire.
If your bike has steel crank arms, it's a little more labor intensive to rethread them, but it's still doable. Whoever does it for you will charge more for steel arms.
BY 1978, it's possible they wee standard threading in 9/16", but the best way to find out is to remove one of them and check it.