handlebar tape recommendations
#1
Senior Member
Thread Starter
Join Date: Jul 2020
Posts: 702
Bikes: '23 Poseidon Redwood, '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 237 Times
in
151 Posts
handlebar tape recommendations
I bought and installed some Profile Designs handlebar tape without adhesive. Took me a few tries but I think I can do it correctly now. The tape feels fine and is good quality.
My concern even after wrapping tightly from the inside out (starting at the bottom of the bars) is that I get slight shifting when in the drops.
The previous tape had adhesive and didn't move even with a gel insert underneath (I left this gel for the drops only so I am not sure if this is the reason for the shifting - it doesn't do this on the tops.
Would I be better off with an adhesive lined tape or should I remove the gel inserts and try again?
Also, what do you recommend? I don't need anything really high end like lizard skins but would like it to last, not move and be washable.
I've searched on forums and see that Deda is recommended as is the "gel" type tapes.
Thanks again for the help
My concern even after wrapping tightly from the inside out (starting at the bottom of the bars) is that I get slight shifting when in the drops.
The previous tape had adhesive and didn't move even with a gel insert underneath (I left this gel for the drops only so I am not sure if this is the reason for the shifting - it doesn't do this on the tops.
Would I be better off with an adhesive lined tape or should I remove the gel inserts and try again?
Also, what do you recommend? I don't need anything really high end like lizard skins but would like it to last, not move and be washable.
I've searched on forums and see that Deda is recommended as is the "gel" type tapes.
Thanks again for the help
#2
Senior Member
Thread Starter
Join Date: Jul 2020
Posts: 702
Bikes: '23 Poseidon Redwood, '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 237 Times
in
151 Posts
Looks like it was the gel inserts. I removed them and its stable now. I suspect if I had adhesive lined wrap it would have been ok with the gel. Good to know.
Profile Design wrap is quite good btw. Don't know how long it will last but so far so good.
My previous wrap, Specialized Bar Phat lasted 13 years! Would have gotten that if Amazon had carried it.
Profile Design wrap is quite good btw. Don't know how long it will last but so far so good.
My previous wrap, Specialized Bar Phat lasted 13 years! Would have gotten that if Amazon had carried it.
I bought and installed some Profile Designs handlebar tape without adhesive. Took me a few tries but I think I can do it correctly now. The tape feels fine and is good quality.
My concern even after wrapping tightly from the inside out (starting at the bottom of the bars) is that I get slight shifting when in the drops.
The previous tape had adhesive and didn't move even with a gel insert underneath (I left this gel for the drops only so I am not sure if this is the reason for the shifting - it doesn't do this on the tops.
Would I be better off with an adhesive lined tape or should I remove the gel inserts and try again?
Also, what do you recommend? I don't need anything really high end like lizard skins but would like it to last, not move and be washable.
I've searched on forums and see that Deda is recommended as is the "gel" type tapes.
Thanks again for the help
My concern even after wrapping tightly from the inside out (starting at the bottom of the bars) is that I get slight shifting when in the drops.
The previous tape had adhesive and didn't move even with a gel insert underneath (I left this gel for the drops only so I am not sure if this is the reason for the shifting - it doesn't do this on the tops.
Would I be better off with an adhesive lined tape or should I remove the gel inserts and try again?
Also, what do you recommend? I don't need anything really high end like lizard skins but would like it to last, not move and be washable.
I've searched on forums and see that Deda is recommended as is the "gel" type tapes.
Thanks again for the help
#3
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,432
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3133 Post(s)
Liked 1,701 Times
in
1,027 Posts
Wow, 13 years is longer than I’d expect bar tape to last. Hopefully your new stuff lasts as long, too.
#4
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,648
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 1,464 Times
in
1,013 Posts
I second the Profile Designs Drive tape sold by Amazon.com. It is comparable to Fabric Knurl, which is more expensive (and only sold by third party sellers). Profile Designs Drive has slightly better grip. Fabric Knurl has slightly better cushioning, maybe because it is adhesive lined so I did not have to stretch it as much during installation.
#5
South Carolina Ed
Join Date: Mar 2007
Location: Greer, SC
Posts: 3,889
Bikes: Holdsworth custom, Macario Pro, Ciocc San Cristobal, Viner Nemo, Cyfac Le Mythique, Giant TCR, Tommasso Mondial, Cyfac Etoile
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 291 Times
in
138 Posts
You could just unwrap what you got, wrap some double-sided "scotch" tape where you think you need it, and then re-wrap with your existing tape.
fwiw I buy the $2-$3 dollar tape on Ebay which comes in a lot of colors, wraps easily, stays tight, and holds up well.
fwiw I buy the $2-$3 dollar tape on Ebay which comes in a lot of colors, wraps easily, stays tight, and holds up well.
#6
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,610
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,483 Times
in
4,185 Posts
Bar tape is like gloves or socks- wash it every now and again and change it here and there perhaps? Bars can corrode from sweat that gets thru the tape too, so the internet says.
#7
Senior Member
Thread Starter
Join Date: Jul 2020
Posts: 702
Bikes: '23 Poseidon Redwood, '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 237 Times
in
151 Posts
Observation
I find that having gel in my gloves it’s good enough. No need to also have it in the bar tape. Ymmv
#8
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,505
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4348 Post(s)
Liked 3,985 Times
in
2,661 Posts
Lizard Skins 3.2 DSP is my favorite and 13 years is WAY TOO LONG for bar tape. You should take it off regularly (at least every 2-3 years depending on your usage) and you would need to, so you can replace cables and housing (which also are wear items and should be replaced with some regularity). The reason to remove the tape is to check your handlebars for corrosion. You could have a ticking time bomb underneath and wouldn't know it but that bar tape is soaking up your corrosive sweat and holding onto it quite nicely to attack the typically aluminum bars underneath.
Likes For veganbikes:
Likes For Andy Somnifac:
Likes For Andy Somnifac:
#12
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
I'm a big fan of Bontrager Grippytack - great feel and it looks nice with the peek-through color. Installation can take a bit more work and care, you need to give it a good stretch to make sure it lays flat as you go around the curves, but I think that it's worth the trouble and expense.
#13
Senior Member
Join Date: Aug 2004
Location: Prague, Czech Republic
Posts: 2,751
Bikes: Merlin Extra Light, Orbea Orca, Ritchey Outback,Tomac Revolver Mountain Bike, Cannondale Crit 3.0 now used for time trials.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 126 Post(s)
Liked 55 Times
in
34 Posts
Lizard Skin
#14
Senior Member
Likes For Sojodave:
#15
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,635
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,532 Times
in
1,003 Posts
Likes For Sy Reene:
#17
Senior Member
Join Date: Nov 2012
Location: Palm Desert, CA
Posts: 2,504
Bikes: Speedvagen Steel
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 429 Post(s)
Liked 248 Times
in
156 Posts
Or you can go full on leather by Busyman Busyman Bicycles
Custom patterns and colors, mine is going on three years now
Custom patterns and colors, mine is going on three years now
#18
Senior Member
I've been using 3MM Fizik Tempo Microtex Bondcush Classic for a while now. Fizik offers a ton of different, confusingly named tapes but this one is my favorite:
- perforated glossy leather-like appearance that looks good on any of my bikes
- very, very durable finish, basically looks new until you get sick of it / want to check your bars
- doesn't absorb sweat or rain
- grippy
- easy to wrap tightly
- available in a ton of different colors
- perforated glossy leather-like appearance that looks good on any of my bikes
- very, very durable finish, basically looks new until you get sick of it / want to check your bars
- doesn't absorb sweat or rain
- grippy
- easy to wrap tightly
- available in a ton of different colors
#20
Senior Member
Join Date: Jun 2008
Location: A Yankee in Houston, TX
Posts: 1,074
Bikes: State Bicycle Co. Undefeated Track SS/FG, Lynskey Helix-Bronze
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 204 Times
in
95 Posts
Ciclovation Aurora Purple
Supacaz Prizmatik
Supacaz Oil Slick
Last edited by primov8; 02-12-21 at 12:59 PM.
Likes For primov8:
#21
Senior Member
Join Date: Oct 2013
Location: Oahu, HI
Posts: 1,396
Bikes: 89 Paramount OS 84 Fuji Touring Series III New! 2013 Focus Izalco Ergoride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 285 Post(s)
Likes: 0
Liked 74 Times
in
54 Posts
Like the feel of the lizard skin but doesn't wear well for the price, so switched to fizik.
scott s.
.
scott s.
.
#22
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,872
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 763 Post(s)
Liked 1,731 Times
in
1,008 Posts
I'm a big fan of Bontrager Grippytack - great feel and it looks nice with the peek-through color. Installation can take a bit more work and care, you need to give it a good stretch to make sure it lays flat as you go around the curves, but I think that it's worth the trouble and expense.
Likes For jaxgtr:
#23
Senior Member
Thread Starter
Join Date: Jul 2020
Posts: 702
Bikes: '23 Poseidon Redwood, '07 Specialized Roubaix Comp Triple, '12 Gravity Fixie, '21 Liv Rove 4, '06? Giant EB Spirit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 237 Times
in
151 Posts
https://profile-design.com/collectio...ducts/bar-wrap
#24
Full Member
Join Date: Apr 2013
Posts: 286
Bikes: Tcr advanced sl & Protos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 60 Times
in
33 Posts
I just put on some Selle tape that was 17$ marked down from 40+$ on competitive cyclist.
It’s pretty close to the feel of lizard skin. Not quite as tacky, but very close.
It’s pretty close to the feel of lizard skin. Not quite as tacky, but very close.
Likes For Greatestalltime: