sd5782 

Looking for the tall Nitto Technomic 22.2 stem in 80mm length and 25.4 bar clamp. Bike now has the same but in 110 on it that I would trade if interested. I had the 110 for a too small for me frame, but it is a bit too long for the Miyata I have it on now. I would consider a 90mm also. Thanks

panzerwagon 

I think I’ve one in that size. I’ll dig it up and send you photos.

sd5782 

Thanks much

BTinNYC 

If Panzer's doesn't work out, let me know. I've got an unmounted tall 90mm Nitto stem.

sd5782 

I sure will. eBay prices are $46-50, so not the most expensive to buy, but thought I would try here first. Thanks.

mrv 

if you're still looking, i have an 80mm center bolt to center clamp I would be happy to trade for something longer. thanks.

sd5782 

The one I have looks to be 110mm. No scratches on in, but there is come cloudiness in the finish. Looks worse in pics, but it isn’t in new pristine condition. Is yours also the 225mm insertion length and 25.4 bar size? I’m waiting for a response from Panzer, but the swap for the 80mm would suit me if yours is similar condition to my used one. I would also understand if the finish bothered you.





Thanks
Steve

mrv 

Here’s what I got.
maybe it’s 85mm….
take a look.
I think it’s similar in patina to yours.

sd5782 

Do you have a measurement of the length of this stem along the insertion length? Are those scratches around the shaft? Thanks

sd5782 

Found one, and on its way. Kinda a pain to swap out with bike already set up, but something to do in the winter. First responder Panzerwagon had one in 80mm. As a side note, he also has a really interesting TALL 60mm length one with a nearly 270mm stem. Not sure where that would be useful, but it was an interesting item.