Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

A better hub? maybe.

Notices
Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

A better hub? maybe.

Old 06-10-19, 03:38 PM
  #1  
chrisx
Senior Member
Thread Starter
 
chrisx's Avatar
 
Join Date: Sep 2007
Posts: 924
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
Quoted: 406 Post(s)
Liked 9 Times in 9 Posts
A better hub? maybe.

On paper this is the best, lighter, stronger, lasts longer.
best of all,
One $1,200 hub for all your wheels. Yes comes with a little hub basket so you can take it off the Fargo and put it on the Flow. Even build a wheel for the CCM with rim brakes then switch the hub to a 326 gram ... ..
Looks good on paper, are they ready? After a long long wait. Glad I clicked here Products - Kindernay before I ordered an Alfine.

chrisx is offline  
Old 06-10-19, 05:51 PM
  #2  
Rob_E
Senior Member
 
Rob_E's Avatar
 
Join Date: Jan 2008
Location: Raleigh, NC
Posts: 2,709

Bikes: Downtube 8H, Surly Troll

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Liked 22 Times in 21 Posts
I think “on paper” is the only place this exists. If it ends up being what they’re promising, it could be very good, but it’s not for sale yet as far as I can tell, and it’s certainly untested. If I had the money to spend on untested tech, I’d probably be wiser to just buy a Rohloff and start saving for a 2nd one.
Rob_E is offline  
Old 06-10-19, 07:54 PM
  #3  
DropBarFan
Senior Member
 
Join Date: Mar 2011
Posts: 3,150

Bikes: 2013 Surly Disc Trucker, 2004 Novara Randonee , old fixie , etc

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 671 Post(s)
Likes: 0
Liked 49 Times in 43 Posts
Pretty slick, esp being able to mount same hub on different bikes. I bought a 2nd touring bike a couple of years ago & one thing I hadn't thought of was that I'm more disinclined to buy fancy stuff like a nice dynohub or Rohloff. Not that I'd buy a Rohloff or Kindernay anyway. 1) for that $$ I'd want belt-drive too & 2) with Kindernay the 2nd bike still basically has to be set up for IGH.
DropBarFan is offline  
Old 06-10-19, 09:49 PM
  #4  
saddlesores
Senior Member
 
saddlesores's Avatar
 
Join Date: Feb 2004
Location: Thailand..........Nakhon Nowhere
Posts: 3,652

Bikes: inferior steel....and....noodly aluminium

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 1053 Post(s)
Liked 339 Times in 228 Posts
$1300 for a hub?

not compatible with my other bikes, spares made of unobtainium, would have to buy a new frame with thru-axels..

for the price of just one hub i can buy two complete touring rigs.
...or one rig and a complete set of gear.
saddlesores is offline  
Old 06-11-19, 12:19 AM
  #5  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,457

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1221 Post(s)
Liked 314 Times in 241 Posts
Contender for the NUTTIEST bike idea of ALL time. Right up there with that front fork lock arm idea.
GamblerGORD53 is offline  
Old 06-11-19, 04:03 AM
  #6  
Trevtassie
Senior Member
 
Join Date: Jun 2015
Location: Down Under
Posts: 1,936

Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times in 640 Posts
Give me a call when they make an internal gear hub with 650% range....
Trevtassie is offline  
Old 06-11-19, 05:56 AM
  #7  
Rob_E
Senior Member
 
Rob_E's Avatar
 
Join Date: Jan 2008
Location: Raleigh, NC
Posts: 2,709

Bikes: Downtube 8H, Surly Troll

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Liked 22 Times in 21 Posts
Originally Posted by saddlesores
$1300 for a hub?

not compatible with my other bikes, spares made of unobtainium, would have to buy a new frame with thru-axels..

for the price of just one hub i can buy two complete touring rigs.
...or one rig and a complete set of gear.
Can actually work with standard dropouts. That’s part of the appeal: one hub can be swapped between different wheelsets or different bikes with different widths. Now if you’ve never been tempted by a Rohloff, then this probably doesn’t interest you. But for me the problem with Rohloff is that not only is it over 1k, but I have 2 wheelsets for my bike, so if I want to keep that functionality, I need two, or more if I ever wanted to use it in another bike. Unless I wanted to keep rebuilding my wheels. This hub can go in your standard touring bike and then be swapped into your wide-dropout, fat bike, and then be dropped into your folding bike if that’s what you’re riding next.

And, yes, it’s still a non-user-serviceable part, so not everyone is going to comfortable with that. I’m not comfortable with it largely because it’s new and untested. If it ever gets out into the world and is shown to as reliable as the Rohloff has been, I think it’d worth a closer look.
Rob_E is offline  
Old 06-11-19, 07:18 AM
  #8  
John N
Full Member
 
Join Date: Sep 2005
Location: Tulsa, OK
Posts: 451

Bikes: Co-Motion Americano Pinion P18; Co-Motion Americano Rohloff; Thorn Nomad MkII, Robert Beckman Skakkit (FOR SALE), Santana Tandem, ICE Adventure FS

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 64 Times in 48 Posts
I think the swap feature is nice. However, it doesn't "look" like the outer shell of the swap is very durable. Also, can the hub have a lower ratio than the Rohloff. I "think" the current gives it something like 16.5" using a 700c wheel. Can it go lower? I actually prefer less range and a lower low. When touring, or even club riding, I very rarely go over 20mph so for me a high of low to mid 80" is perfectly fine. I have multiple Rohloff wheels (multipe bikes), and I really wish it had less spread.

Neat concept, I would look at the finished product after a year or so it has actually been on the market.
John N is offline  
Old 06-11-19, 07:47 AM
  #9  
Leebo
Senior Member
 
Join Date: Aug 2009
Location: North of Boston
Posts: 5,721

Bikes: Kona Dawg, Surly 1x1, Karate Monkey, Rockhopper, Crosscheck , Burley Runabout,

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 111 Times in 66 Posts
One could buy 3 really good hubs for whatever bike, axle and width you need, no tinkering needed.
Leebo is offline  
Old 06-11-19, 08:01 AM
  #10  
Rob_E
Senior Member
 
Rob_E's Avatar
 
Join Date: Jan 2008
Location: Raleigh, NC
Posts: 2,709

Bikes: Downtube 8H, Surly Troll

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 303 Post(s)
Liked 22 Times in 21 Posts
Originally Posted by TulsaJohn
I think the swap feature is nice. However, it doesn't "look" like the outer shell of the swap is very durable....
Neat concept, I would look at the finished product after a year or so it has actually been on the market.
Yes, durability is key. That's why I wouldn't postpone any purchasing decisions decisions until this is actually on the market and has been for a while. Personally, it's still a little dodgy as far as utility goes. Right now I have two rear wheels with Alfine-8s in them. The swap takes exactly as long as taking a wheel off and putting it back on. With this set up, there's an additional step of moving this hub between cages. Maybe it's simple and fast. Maybe it's not. Hopefully its durable and secure, but generally durable and secure doesn't go with simple and fast. We'll see.

Originally Posted by Leebo
One could buy 3 really good hubs for whatever bike, axle and width you need, no tinkering needed.
Some people like hub gears, and they have some advantages. They also have some disadvantages, one of which being that they get pricey if you go over 8 gears. But I love hub gears, and for me the advantages outweigh the disadvantages, even to the extent that I'd consider paying a premium price. Yes, I could get three really good hubs for the price, but they would be three really good hubs that I don't necessarily want to use, so I guess "good" is relative. I'm not advocating for this product. It is entirely unproven, but Rohloff has shown that there is a market for expensive, high range, gear hubs, and this has the potential to be a contender in that space. If you don't like hub gears, or don't think they're worth the price, then obviously this has no appeal to you. If you like hub gears, but the premium price for a hub that can only be used in one wheel is a problem, this could be a solution.
Rob_E is offline  
Old 06-11-19, 08:05 AM
  #11  
Nessism
Senior Member
 
Nessism's Avatar
 
Join Date: Jun 2004
Location: Torrance, CA
Posts: 3,059

Bikes: Homebuilt steel

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2180 Post(s)
Liked 419 Times in 332 Posts
Very cool. Pure bike porn. It's amazing how much money some people spend on their bikes.
Nessism is offline  
Old 06-11-19, 02:10 PM
  #12  
chrisx
Senior Member
Thread Starter
 
chrisx's Avatar
 
Join Date: Sep 2007
Posts: 924
Mentioned: 9 Post(s)
Tagged: 1 Thread(s)
Quoted: 406 Post(s)
Liked 9 Times in 9 Posts
fromtheirpage

Can I have one right now?
  • Delivery of commercial series will start 2019.
Where can I buy it?
  • Just go to our webshop, there’s a link in the menu on this page.
    Things are on track for delivery of the first commercial batch by early 2019.
    If you can’t find your way around, go to the about-page and drop us an email.
chrisx is offline  
Old 06-11-19, 02:20 PM
  #13  
UniChris
Senior Member
 
UniChris's Avatar
 
Join Date: May 2017
Location: Northampton, MA
Posts: 1,909

Bikes: 36" Unicycle, winter knock-around hybrid bike

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 930 Post(s)
Liked 393 Times in 282 Posts
Well, if they flop in the bike market, they could get into the unicycle market, this kind of remove the expensive gear mechanism leaving a shell and flanges laced into the wheel has been an often requested feature there (where there is only one 2-speed fixed IGH on the market), lots of folks would be interested in a cheap changeout between "mountain" and "road" wheels. Of course the innards would have to be different - fixed gear, fewer speeds mostly overdrive... Alas it is a small market.

Last edited by UniChris; 06-11-19 at 02:26 PM.
UniChris is offline  
Old 06-11-19, 08:47 PM
  #14  
DropBarFan
Senior Member
 
Join Date: Mar 2011
Posts: 3,150

Bikes: 2013 Surly Disc Trucker, 2004 Novara Randonee , old fixie , etc

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 671 Post(s)
Likes: 0
Liked 49 Times in 43 Posts
Originally Posted by Nessism
Very cool. Pure bike porn. It's amazing how much money some people spend on their bikes.
Well I'm impressed that it's only a bit more cost than the Rohloff. 3-sp Sturmey-Archer hub used to be more popular than derailleur despite being more complicated. With economies of scale, advanced IGH/Pinion/belt could become much cheaper & more popular. Many casual riders buy bikes that are 2-3X+ more expensive than what they need; bikes with much easier maintenance could be made appealing.
DropBarFan is offline  
Old 06-12-19, 09:33 AM
  #15  
GamblerGORD53
Senior Member
 
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,457

Bikes: 2013 Custom SA5w / Rohloff Tourster

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1221 Post(s)
Liked 314 Times in 241 Posts
Originally Posted by Trevtassie
Give me a call when they make an internal gear hub with 650% range....
Give me a call when DeFAILLEURS stop breaking into spokes, stop fluttering, stop chain suck, stop grinding, shift when stopped, can ride thru tall grass, shrug off crashes and collisions and baggage handlers, have 99.99% shifter function with NO adjustments ever, shift 4 gears in 1/2 sec., can use with a chain case, last 1/4 as long as a Rohloff, and gets BETTER with age. LOL

Last edited by GamblerGORD53; 06-12-19 at 09:41 AM.
GamblerGORD53 is offline  
Likes For GamblerGORD53:
Old 06-12-19, 05:42 PM
  #16  
Trevtassie
Senior Member
 
Join Date: Jun 2015
Location: Down Under
Posts: 1,936

Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times in 640 Posts
Originally Posted by GamblerGORD53
Give me a call when DeFAILLEURS stop breaking into spokes, stop fluttering, stop chain suck, stop grinding, shift when stopped, can ride thru tall grass, shrug off crashes and collisions and baggage handlers, have 99.99% shifter function with NO adjustments ever, shift 4 gears in 1/2 sec., can use with a chain case, last 1/4 as long as a Rohloff, and gets BETTER with age. LOL
Love the people who love the Koolaid. Rohloffs have that stupid thing where they change into high gear sometimes when going from 8 to 7. When they need service they are gone for a week minimum, unless you have a service agent in town, because you can't get the special tools needed to work on them. It cost me $250 with shipping to get the seal drag fixed on mine, took two weeks. They leak oil when being transported. they are fiddlier to remove when you do need to remove them for transport. Meanwhile, my partners bike is way lighter than mine, the drivetrain cost 1500 less and when she does need a new cassette and chain it only costs $100 and that's not often because I use Whipperman chains on it. She could carry a spare derailleur, chain and cassette and still be lighter than a Rohloff.
Trevtassie is offline  
Likes For Trevtassie:
Old 06-18-19, 10:03 PM
  #17  
Ultralight
Banned
 
Join Date: Jul 2015
Posts: 72
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
I would love to hear from actual owners on this forum.

Anyways, they have been shipping for a few months. Apparently an order now will be delivered in August. There's also a youtube review of sorts that just posted:



I'd love to try one evenntually.
Ultralight is offline  
Old 01-12-23, 01:24 AM
  #18  
hkckoo
Newbie
 
Join Date: Jul 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 1 Time in 1 Post
ordered this a month ago, cant wait to build the wheel and try it!
hkckoo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bikeboy
Bicycle Mechanics
7
08-30-22 12:47 PM
twelsch42
Bicycle Mechanics
2
10-22-11 09:02 PM
irwin7638
Bicycle Mechanics
7
03-08-11 09:58 AM
crazzywolfie
Bicycle Mechanics
14
11-15-10 04:20 AM
chucky
Bicycle Mechanics
5
01-18-10 07:51 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.