Rotten

ISO Sansin (or compatible) rear axle for QR hub. My measurements show 135mm long, diameter at smooth section is 9.25mm and the threaded ends are 9.85mm.

philpeugeot 

Got a set of scuffy Sugino AT cranks, 180 mm. Would like to trade them for a 170mm set. Thanks.


Edit: forgot to include a photo of some gashes. Non-structural, but they're there.

jdawginsc 

I also have a Sakae CR with rings (1/2 step plus granny). Edit, I lied...it is a Sakae SA with rings...nicer. I also have a Sugino VP130 in 165 if you would like something even shorter armed.

Send me a PM with your address. Glad to finally be able to repay your kindness!

mountaindave 

[QUOTE=brockd15;22648546]too.
- Decaleur for use with a 1" headset/QUOTE]
I have a couple options, but might require the VO bag-mounted half.

Sounds like a 650b conversion might be in process?

cudak888 

ISO: One Continental Grand Sport Race tire in 27x1-1/4"

Used is fine.




-Kurt

bertinjim 

ISO: One Campy Record seat cradle or a trashed seatpost with decent cradles.​​​​​​​

brockd15 

[QUOTE=mountaindave;22650217]Thanks, I'd be interested to hear more about what you have.

No 650b conversion going on, at least not yet but maybe at some point. I'm actually trying to get a couple rando bikes finished up and am missing some key parts.

abshipp 

ISO 130bcd 3/32 44-46 tooth chainring.

Something that would look nice on a Arabesque crank.

L134 

Is this what you are looking for?

bertinjim 

L134-

That's exactly what is needed! Care to sell it?

mountaindave 

[QUOTE=brockd15;22652383]PMed

th3realmckay

ISO Positron inner shift cable/wire for 71in/1804mm housing.

Force 

Have a Campy BB, Italian thread. Came with what I believe to be a Croce d'Aune crank. 111 mm spindle. I need a similar English BB. Here's what I have. It's in good condition. Let me know if anyone would like to trade an Italian for an English BB. Thanks!

JulesCW 

I'm looking for a decent long cage Huret Jubilee rear derailleur to fit a Campagnolo dropout -- hopefully for a reasonable price.

Straight $$ or trades or a combo welcome -- I've got an assortment of stuff.

SJX426 

NOS New Campagno Record NGS Bottom Bracket Cup - Italian Thread 36x24F. 1970’s | eBay

VintageRide

ISO:


Hoping to source a few parts:

Lyotard 460D pedals 9/16 threading or MKS Sylvan Touring including the " Next " version.
TA Cyclotouriste 46T outer and 26 or 28T inner.
60 cm Nitto Technomic stem
Berthoud large front bag.
Shimano M700 Deer Head front derailleur
V.O. Rando handlebars 60 cm
Suntour 14 - 34 T 5 speed freewheel, preferably gold finish
KMC X9 chain


I have to trade:

Sugino Mighty Competition crankset, 44 / 52T with 170mm arms. Practically brand new never used.
Campagnolo Record 1st generation pedals with steel cage, early '60's. Bearings silky smooth, good condition.
Campagnolo Record rear derailleur, 1st generation, early '60's with steel smooth pulleys. Good condition.
Campagnolo Gran Sport front derailleur, 1960's, good condition.
Dia Compe GC 610 centerpull brakes with levers, like new never used. Hoods are deteriorated
Weinmann 999 centerpull brakes with engraved script, early 1960's. Very good condition.
SR Laprade seatpost, fluted. 26.6mm diameter , length 200 mm from frame rails. Good condition.
KKT Pro Vis II pedals, like new, never used.
Sedis 5 speed chain, never used in very good condition.
French Pivo 9 cm stem with 37 cm alloy handlebars.
Wheelset - 700C clincher Araya rims, 36H with Shimano small flange hubs, no model # but have oil holes. Tires are Norco 28 mm made by National. Brand new never used.
Two pairs of Challenger Strada 25mm tubular tires lightly used. One Vittoria Competition Rally Kevlar 25mm tubular, unused. One pair with some use.
Wheel set - Early 1960's with Normandy high flange hubs with Simplex skewers. Mavic 700C 36H tubular rims. Good condition, hubs and rims polished.
Can supply images if needed.

oneclick 

USA shipping only.

Thanks anyway, I had assumed the going price on that auction site would be double or more so the search field widens...

philbob57

You can buy brand-new genuine TA rings from, among other places, https://www.veloduo.co.uk/collection...nt=26019155207 and from T.A itself (though they're more expensive).

PugRider

Looking for a stem for a 1 1/4" threadless steerer for a Cannondale R2000 build that has at least a little bit of rise (or the modern ones that can go either way). Can be 25.4 or 31.8 handlebar clamp, I have both on hand. The Control Tech that's on there now is a negative rise that I know is gonna kill me.

I have some oddball stuff, depending on what you're looking for.

Thanks!

Drillium Dude 

Got hit from behind by a car last night, damaging my rear wheel to the point it'll likely need to be replaced.

Does anyone have an 8-speed wheelset, using Campy Chorus/Record hubs with Exa-Drive cassette body? Hopefully 36h, but 32h would also work.

Failing that, a long shot, but how about just a rim? 32h Campagnolo Omega 19, silver anodized. Clincher.

Thanks!

DD

Bianchigirll 

Are you OK? That kinda stinks. I hope they stopped.

mountaindave 

Seriously! I hope the bike was attached to DD's car when he got hit and not DD attached to his bike!

Drillium Dude 

Oh, I'm fine - just some superficial cuts, thanks! The gentleman stopped, and called PD/Fire, plus contacted his insurance company and took full responsibility. It'll take a few days/weeks, but I'll be able to get things fixed/replaced and hopefully get back on the bike sooner rather than later.

DD

Drillium Dude 

Nope, I was riding it - but became detached from it pretty fast when his bumper met my rear wheel! But all will be rectified in the end

DD

mountaindave 

So glad to hear you're OK! I'm also glad to hear the driver took the proper steps to resolve the situation. Wish I had a rim for you. Heal up and best of luck getting your bike back in rideable shape.