Why new chain with new cassette
#2
Banned
Are you sure? Have you measured ? a New chain 1/2" pitch per link .. so 12" of chain (24 centers of pins) is 12.00"
Got a etched steel 12" ruler ? I suggest Buying one.
Got a etched steel 12" ruler ? I suggest Buying one.
#3
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 640 Times
in
361 Posts
However much wear your chain has, it will wear down your new cassette to that point in short order. If your chain only has a few hundred miles on it, you might not mind wearing your cassette by that amount.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#4
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,085 Times
in
733 Posts
Unless a chain has very few miles, it won't mesh properly with a new cassette cogs, particularly the smaller, most used ones. The result is it will "skip" under load. As to whether your chain is "stretched", that is most commonly measured by using a good ruler over 24 pins. A new chain should measure 12" exactly. A measurement of 12-1/16" is really marginal and 12-1/8" is the "throw both it and the cassette away" point.