What is the whole thing about using crumpled aluminum foil to restore AL finish??
#1
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Likes: 0
Liked 34 Times
in
28 Posts
What is the whole thing about using crumpled aluminum foil to restore AL finish??
A couple of times I read in this forum recommendations to use crumpled aluminum foilt to restore finishes. Don't quite understand how it works. Is it used to polish aluminum component parts? Does it result in a smooth polished finish? Is it used to take anodizing off? Please advise.
Chombi
Chombi
#2
Fuji Fan
I've used it on chrome, not aluminum. I don't imagine aluminum on aluminum will do you any good.
#4
Senior Member
Yeah, foil and water is one way to get rid of rust. The foil is abrasive enough to get off most surface rust, but I would never try using it on chrome... I feel like that's a recipe for scratches.
#5
Stop reading my posts!
Randy Jawa swears by it (maybe the foil is different in Canada), but IMHO it doesn't work.
Try it yourself and decide.
Try it yourself and decide.
#6
Senior Member
Works with Southern California foil as well but only on chromed parts. Used it extensively on my old Le Tours as well as an old chrome DB MTB.
#7
Spin Forest! Spin!
Join Date: Sep 2007
Location: Arrid Zone-a
Posts: 5,956
Bikes: I used to have many. And I Will again.
Likes: 0
Liked 11 Times
in
10 Posts
As you rub the aluminum foil, it's softer and shouldn't scratch, the action results in forming aluminum oxide, which is abrasive and remove surface rust and mild scratches.
Well, that's the theory.
Well, that's the theory.
#8
Fuji Fan
It didn't leave scratches on my chrome. I wish I had before/after shots, but I was happy with the results. I tried it first on an old set of chrome rims and then on a frame. Both look good now.
#9
I have a '62 Schwinn Jaguar IV, A bigger chrome boat you will never see. I used foil on the fenders, frame and rim and she looks great. Almost no bad chrome on the entire bike. A few ( maybe 4 or 5) bad spots half the size of a pinky nail on whole bike.. Ya have to WORK it though.
#10
I'm shovel-ready!
Join Date: Jan 2010
Location: Seattle, WA
Posts: 136
Bikes: Raleigh Sports All-Gold
Likes: 0
Liked 6 Times
in
5 Posts
I used crumpled foil with some light machine oil for lubrication on all the chrome parts on my Raleigh Sports, and it worked like a charm. Rust came off easily, and not a scratch in sight. I experimented with 0000 steel wool on a few parts early in the process, and definitely noticed some fine scratching - so I never used it again. The foil was the answer, for me.
#11
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Likes: 0
Liked 34 Times
in
28 Posts
Great! Thanks for the clarification guys! I will use crumpled aluminum foil the next time I have to clean off any rust freckles on my PSV's chromed fork. I wish there is an equvalent material to use on polished aluminum, but finding a softer material than AL in foil form will be a bit hard........unless I'm filthy rich and could afford gold foil in big rolls! Mother's or Eagle 1 aluminum wheel polish will have to suffice for now, I guess......
Chombi
Chombi
#13
Ride heavy metal.
Join Date: Sep 2009
Location: Teenage Wasteland, USA
Posts: 1,538
Bikes: '74 Raleigh LTD-3, '76 Motobecane Grand Jubile, '83 Fuji TSIII (customized commuter), '10 Mercier Kilo WT (fixed obsession), '83 Bianchi Alloro, '92 Bridgestone MB-1 (project), '83 Specialized Expedition (project), '79 Peugeot UO-8 (sold)
Likes: 0
Liked 1 Time
in
1 Post
I've used aluminum foil with lemon juice on rust and "cloudy" chrome, and it's done me really really well.
I've also used it on alloy components (handlebars, stem, etc) and it's done a fantastic job on them FWIW.
I've also used it on alloy components (handlebars, stem, etc) and it's done a fantastic job on them FWIW.
#15
Senior Member
Join Date: Jan 2010
Location: Pennsyl-tuckey
Posts: 684
Bikes: '86 Cannondale SR400, '86 Pugeot PX10, '92 Bianchi Axis, '95 Bianchi Campione d'Italia, '00 Fondriest X-Status, '08 Specialized Roubaix, '13 Cannondale CAADX
Likes: 0
Liked 2 Times
in
2 Posts
I didn't believe it either, then I tried it on an old seat post just to see. Darned but it didn't shine it up! Give it a try, not like it's gonna cost more than a few cents. Use the leftovers for lining cookie sheets, making Christmas ornaments, grilling vegetables, etc...
#16
Senior Member
#17
I'm shovel-ready!
Join Date: Jan 2010
Location: Seattle, WA
Posts: 136
Bikes: Raleigh Sports All-Gold
Likes: 0
Liked 6 Times
in
5 Posts
I didn't believe it either, then I tried it on an old seat post just to see. Darned but it didn't shine it up! Give it a try, not like it's gonna cost more than a few cents. Use the leftovers for lining cookie sheets, making Christmas ornaments, grilling vegetables, etc...
I've heard this many times, but I couldn't find brass wool anywhere. I found it online, but it was expensive and I hate to wait for things to be shipped. None of my local hardware or painting stores had it - where should I have looked?
#18
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,602
Bikes: https://www.theheadbadge.com
Liked 4,538 Times
in
2,143 Posts
-Kurt
#19
Senior Member
Thread Starter
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Likes: 0
Liked 34 Times
in
28 Posts
So, I understand now that these all just work for chrome on steel and not aluminum....as I think that the Bronze wool material is harder than AL too.....yes?? I do remember using real fine steel wool to remove rust from a chrome bumper when I was a kid...
I suspect all this stuff, including crumpled aluminum foil, would just end up dulling a polished aluminum surface, as the polishing medium generally needs to be softer than the metal being polished.
Chombi
I suspect all this stuff, including crumpled aluminum foil, would just end up dulling a polished aluminum surface, as the polishing medium generally needs to be softer than the metal being polished.
Chombi