Work in Progress
Another Bitsa Scorcher put together with
assorted parts that were kicking around.
This was going to be 6 speed conversion with the
vintage Cyclo deraileur but on closer examination
the Cyclo is badly bent and needs to be straightened.
The bike is fitted with a standard 26 x 1 3/8 rim on the back with 2 cogs/
A 17T and a 21T
Up front is a $10.00 EA1 rim that cleaned up nicely and fitted with a Kenda K23 tire.
I still need a rear brake and lever but that's not hard to find.