Ask your small, random, track-related questions here
#5526
Senior Member
Fair enough. My local indoor has an elevator on the outfield side but only steps on the infield side of the tunnel and agree steps are a pain. But it is only one set in and out so preferred this to the multiple trips to the carpark; which could a long walk if other events were on as it is part of a multiple sport complex. Plus avoided the sore arms carrying the rollers and other gear. Will look into Carletons suggested bag though, sounds interesting!
#5527
I'll add my wife has the smaller Ogio Endurance 7.0.
Both bags have external helmet strap systems, which are nice. But the 9.0 is large enough I can fit shoes, clothes, track sack, towel and helmet inside the main compartment. The helmet strap would let me bring two helmets - regular and aero. It also has two external pockets for bottles (7.0 has one).
There are also plenty of pockets on the side and an expandable area for storing a wet suit - would probably work for a track sack as well.
Both bags have external helmet strap systems, which are nice. But the 9.0 is large enough I can fit shoes, clothes, track sack, towel and helmet inside the main compartment. The helmet strap would let me bring two helmets - regular and aero. It also has two external pockets for bottles (7.0 has one).
There are also plenty of pockets on the side and an expandable area for storing a wet suit - would probably work for a track sack as well.
#5529
Senior Member
Laptop bag - one made for the older larger laptops. Mine cost me $15 and I have too much room, thus allowing me to carry much more than I'll probably ever need I purchased based on recommendation from a friend and best move ever. Cheap as hell and had room for my 60t that no gear bags at the time catered for. I use cardboard pockets to separate the chainrings so they don't scratch up on each other. Can carry it in the hand or they come with a shoulder strap for more carry options.
#5530
Senior Member
Another +1 for the Ogio bags. My bag is pretty much the equivalent of Dalai's system, but the handle and wheels are contained in the bag. Motocross gear bags are well suited to what we need. They can be large enough to take everything we need, they're often compartmentalised to separate various bits, and a lot of them come with handles and wheels to aid transport. If I spent more time at tracks where I had to carry my gear though, I'd invest in one of those little trolleys that have been posted about before and just carry everything including the bike in one go.
#5531
Junior Member
One more for you - last year I started using my High Sierra ski boot backpack as a temporary track bag. Its just a big square-ish backpack, no fancy compartments, just a couple of pockets. It is just the right size for my tools/shoes/helmet/gear and I have been using it ever since.
Amazon has hundreds of boot backpacks from about $40 - might be worth a look.
Amazon has hundreds of boot backpacks from about $40 - might be worth a look.
#5532
Elitist
Thread Starter
This has always been an interesting topic for me. I've created a thread: https://www.bikeforums.net/track-cyc...your-gear.html
(I feel like there used to be an old thread on this, but I can't find it.)
(I feel like there used to be an old thread on this, but I can't find it.)
#5533
Elitist
Thread Starter
Small thing that every trackie will find handy...
I bought some chairs from IKEA and in each one they included a 5mm ball-head allen wrench...the kind that are perfect for removing chainring bolts.
So, if you are ever in IKEA, there is an area, usually near the Merchandise Returns area, where small parts bins are located with all of the weird IKEA tools, screws, nuts, bolts, etc... free of charge (I think). These allen wrenches should be over there.
It's always nice to have one or two extra in case someone borrows yours in the infield and doesn't return it. Or one for the track sack and one for the toolbox.
EDIT:
For those who aren't familiar, the ball-head end is especially nice. It allows one to vary the angle slightly and still maintain contact. This makes for easy spinning of the chainring bolts on and off with the fingers.
I bought some chairs from IKEA and in each one they included a 5mm ball-head allen wrench...the kind that are perfect for removing chainring bolts.
So, if you are ever in IKEA, there is an area, usually near the Merchandise Returns area, where small parts bins are located with all of the weird IKEA tools, screws, nuts, bolts, etc... free of charge (I think). These allen wrenches should be over there.
It's always nice to have one or two extra in case someone borrows yours in the infield and doesn't return it. Or one for the track sack and one for the toolbox.
EDIT:
For those who aren't familiar, the ball-head end is especially nice. It allows one to vary the angle slightly and still maintain contact. This makes for easy spinning of the chainring bolts on and off with the fingers.
#5534
Full Member
Sorry if I missed this if already posted, but are Stone chainrings crap quality, or good? I'm looking for a good, affordable, round, stiff big ring or two (58 and 60t). Thank you for insights as always.
#5535
How could I get a Fuji Norcom seatpost? Had written to all email addresses available at internet related with Fuji, Fuji dist., Oval, etc., without success.
It's related with track because I use the wonderful Fuji Track Elite frame, but its seatpost is too far back and the one-screw system doesn't hold the seat level, when you get the extra "g" on track banks.
The Norcom have same system/profile but it's much more advanced and will not suffer from the high moment that is moving my seat..
This with the battery is the Norcom TT bike seatpost:
this the original:
It's related with track because I use the wonderful Fuji Track Elite frame, but its seatpost is too far back and the one-screw system doesn't hold the seat level, when you get the extra "g" on track banks.
The Norcom have same system/profile but it's much more advanced and will not suffer from the high moment that is moving my seat..
This with the battery is the Norcom TT bike seatpost:
this the original:
#5536
I'm not sure what you are asking exactly?
Fuji won't answer your emails (they never have mine) you will have to find a brick and mortar dealer and go through them if you want a seatpost or any other parts.
The toppers are Ritchey WCS Alloy 1-bolt . It's the same on the track elite and the Norcom.
Fuji won't answer your emails (they never have mine) you will have to find a brick and mortar dealer and go through them if you want a seatpost or any other parts.
The toppers are Ritchey WCS Alloy 1-bolt . It's the same on the track elite and the Norcom.
#5537
Elitist
Thread Starter
I'm not sure what you are asking exactly?
Fuji won't answer your emails (they never have mine) you will have to find a brick and mortar dealer and go through them if you want a seatpost or any other parts.
The toppers are Ritchey WCS Alloy 1-bolt . It's the same on the track elite and the Norcom.
Fuji won't answer your emails (they never have mine) you will have to find a brick and mortar dealer and go through them if you want a seatpost or any other parts.
The toppers are Ritchey WCS Alloy 1-bolt . It's the same on the track elite and the Norcom.
If I recall, he lives in South America (Brazil?), so finding a brick and mortar Fuji dealing shop might not be easy.
RA Cycles in NYC is a major bike shop. They can get just about anything. If you can work something out with them, maybe they can get you the post and ship it to you. I bought my first TK1 from them and they got me an upgraded seatpost soon after. They also tried to get me a seatpost for my LOOK 496 but were not able...but they tried.
https://www.racycles.com
#5538
Senior Member
Having said that, Gebhardt rings are cheaper (for me and where I live) and have a proven record. GR8 rings are around the same price as the Stone and I already have those in 58t & 60t. There's probably a whole lot of other manufacturers around now seeing as all you really need is a CNC machine and a design file and off you go with some alloy from any supplier
#5539
I think he's asking if we know of any other way to get this seatpost outside of what he's done so far.
If I recall, he lives in South America (Brazil?), so finding a brick and mortar Fuji dealing shop might not be easy.
RA Cycles in NYC is a major bike shop. They can get just about anything. If you can work something out with them, maybe they can get you the post and ship it to you. I bought my first TK1 from them and they got me an upgraded seatpost soon after. They also tried to get me a seatpost for my LOOK 496 but were not able...but they tried.
https://www.racycles.com
If I recall, he lives in South America (Brazil?), so finding a brick and mortar Fuji dealing shop might not be easy.
RA Cycles in NYC is a major bike shop. They can get just about anything. If you can work something out with them, maybe they can get you the post and ship it to you. I bought my first TK1 from them and they got me an upgraded seatpost soon after. They also tried to get me a seatpost for my LOOK 496 but were not able...but they tried.
https://www.racycles.com
Another option (failing contacting somewhere like RA) would be using a middle man from someone/where with access to a brick/mortar.
It's pretty annoying to have a brand like Fuji that sells a lot of bikes online not be willing to talk to the consumer directly about small parts. I tried to buy some of the Norcom stems (matches the Track Elite's lines nicely) a year or so ago but also got the cold shoulder. Eventually just bought some used through forums.
#5540
Elitist
Thread Starter
What happened to Shane Perkins at Worlds? He was rostered for TS, but it seems that he didn't ride even once.
How is his moving to RUS working out in general?
How is his moving to RUS working out in general?
#5541
Senior Member
I asked this a couple of weeks ago. Seems unclear, but maybe he just missed qualification? Or was an alternate? In any case, he's here now doing pro keirin and actually earning some Y.
#5542
I found it really strange at the time, because he was hyping it up and mentioning looking forward to his involvement. Then the week of the competition he went radio silent.
#5543
Senior Member
Agree. I was also pretty surprised. Weird backroom maneuvering at the Russian team? Seems a real shame as he obviously went through a lot to change nationalities only to be left home.
#5544
Full Member
I've been using basic, similarly-priced, EAI Deluxe and DA cogs. I notice no difference in performance or durability so far, but what do I know.
Is it worth it to spend more on cogs, or are these just fine for regular working stiffs?
Is it worth it to spend more on cogs, or are these just fine for regular working stiffs?
#5545
Senior Member
However, if you've got the coin and it excites you and it makes you want to ride, go for it. The whole damn bike industry is built around the sale of parts that the vast majority of riders don't really need
#5546
Full Member
No. For the regular Joe, the claimed (I've never personally come across any substantiation to the various claims) benefits are miniscule and your money will be better spent on things that mean more. I've seen many records set on gear that is thought to be sub standard by the collective mind. Get faster, get stronger (on the bike).
However, if you've got the coin and it excites you and it makes you want to ride, go for it. The whole damn bike industry is built around the sale of parts that the vast majority of riders don't really need
However, if you've got the coin and it excites you and it makes you want to ride, go for it. The whole damn bike industry is built around the sale of parts that the vast majority of riders don't really need
#5547
I've bought several DA cogs from NJS-Export. They are used, but they are generally in great shape and decently priced. I've also found that prices on the eBay site (listed at the bottom of the page) tend to be a bit cheaper. Shipping from Japan typically takes less than a week to get all the way to the East Coast.
#5549
Elitist
Thread Starter
Shimano’s doesn’t accommodate 12t because their range begins at 13t.
A 12t lockring will work with any cog.
#5550
Full Member
Clinchers for outdoor velodrome?
Started riding at the local velodrome a couple weeks ago, and I just traded a commute bike for a track bike that needs new tires. I'll be running exclusively on an outdoor, cement track. No boards, and (if it needs to be said) no road.
I'll be using clinchers for now. Can I run any old fairly low-resistance, reasonably supple road tires for the moment (e.g., Conti GP 4000s)?
Thanks!
I'll be using clinchers for now. Can I run any old fairly low-resistance, reasonably supple road tires for the moment (e.g., Conti GP 4000s)?
Thanks!