Addiction LXXX
#6351
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
Cook the turkey!
It's not hard. Clean the bird and empty the junk out of the cavity (throw it away unless you want it for something). Stuff the cavity with chopped apple, opinion, celery, and any herbs you might want. You can also change that up to give you a flavor that appeals to you. Brush the outside with olive oil, and sprinkle with ground sea salt and ground coarse pepper. Or, you can rub with any number of things depending on the flavor you want.
Preheat oven to 350.
Put the bird in a roasting pan. When oven is at temp, but the bird in. Use an oven probe in the thigh, and set an alarm for 165 degrees. Some say to tent it with foil to help keep it moist, others don't. If you do, remove the tent about 1/2 hour before it is done (about 155 degrees) to help the breast skin brown. If the leg freely turns in its socket, then the bird is done.
Can't comment on stuffing as that's not my thing.
I've been the turkey cooker in the family for 25 years. I usually smoke them, and if we are having a large group will do several all seasoned and flavored differently. Some that I do fairly consistently are lemon/herb, Cajun spiced with butter injection (my wife is from Louisiana), bourbon brined, and some others that I just make up as I go depending on what's in the house. For smoke flavor I'll use mainly apple with poultry, but have also used hickory, cherry, and mesquite depending on the desired outcome.
It's not hard. Clean the bird and empty the junk out of the cavity (throw it away unless you want it for something). Stuff the cavity with chopped apple, opinion, celery, and any herbs you might want. You can also change that up to give you a flavor that appeals to you. Brush the outside with olive oil, and sprinkle with ground sea salt and ground coarse pepper. Or, you can rub with any number of things depending on the flavor you want.
Preheat oven to 350.
Put the bird in a roasting pan. When oven is at temp, but the bird in. Use an oven probe in the thigh, and set an alarm for 165 degrees. Some say to tent it with foil to help keep it moist, others don't. If you do, remove the tent about 1/2 hour before it is done (about 155 degrees) to help the breast skin brown. If the leg freely turns in its socket, then the bird is done.
Can't comment on stuffing as that's not my thing.
I've been the turkey cooker in the family for 25 years. I usually smoke them, and if we are having a large group will do several all seasoned and flavored differently. Some that I do fairly consistently are lemon/herb, Cajun spiced with butter injection (my wife is from Louisiana), bourbon brined, and some others that I just make up as I go depending on what's in the house. For smoke flavor I'll use mainly apple with poultry, but have also used hickory, cherry, and mesquite depending on the desired outcome.
Likes For seedsbelize:
#6352
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
Hey Bah Humbug - Seattle Coffee Gear has the Eureka Mignon Crono grinder on sale for $199 (reg $379), if you still have someone shopping for a grinder for you. I haven't looked at reviews, but Eureka is well regarded and I'd imagine it's a good machine.
Likes For seedsbelize:
#6353
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,064
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22607 Post(s)
Liked 8,929 Times
in
4,161 Posts
#6354
Senior Member
Join Date: Jan 2010
Posts: 39,257
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18424 Post(s)
Liked 15,582 Times
in
7,337 Posts
Current state of the hand. The second opinion I got today says I don’t need pins in the thumb, but they are worried I tore a ligament, which would require surgery. MRI Friday morning. Wonder when/if I will be able to ride a bike again.
Likes For indyfabz:
#6355
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,064
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22607 Post(s)
Liked 8,929 Times
in
4,161 Posts
Heal up!
#6356
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,250
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10176 Post(s)
Liked 5,873 Times
in
3,161 Posts
I have very little doubt you’ll ride again. Going to cook anything interesting?
#6357
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,250
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10176 Post(s)
Liked 5,873 Times
in
3,161 Posts
We are doing a turkey breast, chipotle sweet potato soup, a sausage and chard fritata, green beans, and Brussels sprouts, probably sautéed with bacon.
Last edited by MoAlpha; 11-25-20 at 01:48 PM.
Likes For MoAlpha:
#6358
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,797
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9656 Post(s)
Liked 6,366 Times
in
3,506 Posts
We are going full carbs 'n carnivore - 20 pound turkey for four, mac and cheese, pound cake with ice cream, wine, probably an Old Fashioned or two. Maaaaybe a veggie.
#6359
Senior Member
Join Date: Dec 2019
Location: 757
Posts: 11,255
Bikes: Madone, Emonda, 5500, Ritchey Breakaway
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 10238 Post(s)
Liked 5,188 Times
in
2,226 Posts
that sucks! Hope you get better news Friday.
#6360
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,357
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 246 Post(s)
Tagged: 1 Thread(s)
Quoted: 11405 Post(s)
Liked 4,761 Times
in
2,770 Posts
Dang. You did it right. I'm hoping for good news.
#6361
So it is
Join Date: Sep 2008
Location: Westminster, CO
Posts: 21,357
Bikes: Luzerne, 684, Boreas, Wheelhouse, Alize©®, Bayamo, Cayo
Mentioned: 246 Post(s)
Tagged: 1 Thread(s)
Quoted: 11405 Post(s)
Liked 4,761 Times
in
2,770 Posts
Will do.
I'm mostly OK with it all, but I did include a couple of orders of veggies, just in case. I think I'll make a Key Lime Pie for Mrs. LAJ, and then try and talk her out of her Sweet Potato Pumpkin Pie....
Roasted Tofu with Cranberry Orange Chutney
Cauliflower Mashed Potato with Celery Root Gravy
Roasted Winter Vegetables with Sage Pesto
Cornbread with Maple "Butter"
Sweet Potato Pumpkin Pie
#6362
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,859
Bikes: everywhere
Mentioned: 72 Post(s)
Tagged: 1 Thread(s)
Quoted: 12784 Post(s)
Liked 7,697 Times
in
4,086 Posts
Mega carbs on my menu:
Turkey breast
stuffing
mashed Yukon golds w/ beef gravy
hominy and Hatch chile casserole
cranberry sauce
braised carrots with thyme
Turkey breast
stuffing
mashed Yukon golds w/ beef gravy
hominy and Hatch chile casserole
cranberry sauce
braised carrots with thyme
Likes For LesterOfPuppets:
#6363
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,064
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22607 Post(s)
Liked 8,929 Times
in
4,161 Posts
#6364
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,859
Bikes: everywhere
Mentioned: 72 Post(s)
Tagged: 1 Thread(s)
Quoted: 12784 Post(s)
Liked 7,697 Times
in
4,086 Posts
Guess I better get that bird part into some brine!
#6365
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,006
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11975 Post(s)
Liked 6,655 Times
in
3,486 Posts
It will just be the two of us so we're eating light:
roast turkey
stuffing w sausage
candied yams (mom's recipe)
collard greens
rutabaga
cranberry sauce
apple pie
sweet potato pie
chocolate swirl ice cream
Plus plenty of football.
roast turkey
stuffing w sausage
candied yams (mom's recipe)
collard greens
rutabaga
cranberry sauce
apple pie
sweet potato pie
chocolate swirl ice cream
Plus plenty of football.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
Likes For BillyD:
#6366
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,064
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22607 Post(s)
Liked 8,929 Times
in
4,161 Posts
Likes For datlas:
#6367
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,250
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10176 Post(s)
Liked 5,873 Times
in
3,161 Posts
#6368
shaken, not stirred.
Join Date: Aug 2006
Location: The Shaky Isles.
Posts: 5,250
Bikes: I've lost count.
Mentioned: 40 Post(s)
Tagged: 1 Thread(s)
Quoted: 1412 Post(s)
Liked 971 Times
in
390 Posts
I hope you heal up quick.
__________________
Get a bicycle. You will not regret it if you live. ~Mark Twain, "Taming the Bicycle"
vBulletin: snafu
#6369
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,082
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8845 Post(s)
Liked 2,995 Times
in
1,741 Posts
#6370
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,987
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10442 Post(s)
Liked 11,916 Times
in
6,102 Posts
Likes For genejockey:
#6371
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,987
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10442 Post(s)
Liked 11,916 Times
in
6,102 Posts
This morning was nuts.
Suffice to say that between Mrs. GeneJockey sorta, kinda quarantining, and a crew showing up to vacuum up the old cotton waste insulation in the attic, and having to do a Zoom meeting with my boss and the CSO to discuss a project of great interest to our CEO, I've been busier than the fabled one armed paperhanger.
I'm not even sure I'm gonna do Thanksgiving dinner, at the rate this is going. I have not been able to shop yet.
Suffice to say that between Mrs. GeneJockey sorta, kinda quarantining, and a crew showing up to vacuum up the old cotton waste insulation in the attic, and having to do a Zoom meeting with my boss and the CSO to discuss a project of great interest to our CEO, I've been busier than the fabled one armed paperhanger.
I'm not even sure I'm gonna do Thanksgiving dinner, at the rate this is going. I have not been able to shop yet.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#6372
Silver Comet Fred
Join Date: Jan 2017
Location: NW Metro Atl.
Posts: 12,082
Bikes: 1
Mentioned: 145 Post(s)
Tagged: 2 Thread(s)
Quoted: 8845 Post(s)
Liked 2,995 Times
in
1,741 Posts
#6373
Administrator
Thread Starter
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,006
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11975 Post(s)
Liked 6,655 Times
in
3,486 Posts
Good point. Maybe I was premature in tossing out the mac n cheese.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#6374
Senior Member
Join Date: Feb 2009
Location: Silver Spring, MD
Posts: 1,439
Bikes: Yes please
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 536 Post(s)
Liked 308 Times
in
199 Posts
I've been making some test pieces in the shop, working out the kinks in the process and getting familiar with the capabilities and limitations of the available tools, but have been frustrated by some lousy fitting tongue and grooves coming off of the router table. After looking a little more closely, I noticed that the tongues on the rails, in particular, were a little wonky and skewed - I'd set up the cutters so that the tongue was a 1/4" from the face side of the piece, but it'd be 1/4" on one side and skewed to 5/16" or so on the other
Last spring, I'd set up the table and mounting plate so that it was nice and flat, but these results were pretty ****ty, so I got out a straight edge to re-check. Everything looked fine as before... until I got to the opening in the mounting plate Yeah, the plate is flat at the leading and trailing edges, but there's a dip in the middle of the plate, right where you wouldn't want it, right at the cutter, and it's a good 1/16 or so. Longer, bigger pieces don't dip in to that low spot, but the shorter 1 1/2" rails were dipping in as they were pushed through.
Oh well, at least I know, now. Not sure how I'll proceed, though. Buy a replacement that might also be wonky? Flatten the one that I have with some elbow grease and lots of sand paper? Make my own table?!
Last spring, I'd set up the table and mounting plate so that it was nice and flat, but these results were pretty ****ty, so I got out a straight edge to re-check. Everything looked fine as before... until I got to the opening in the mounting plate Yeah, the plate is flat at the leading and trailing edges, but there's a dip in the middle of the plate, right where you wouldn't want it, right at the cutter, and it's a good 1/16 or so. Longer, bigger pieces don't dip in to that low spot, but the shorter 1 1/2" rails were dipping in as they were pushed through.
Oh well, at least I know, now. Not sure how I'll proceed, though. Buy a replacement that might also be wonky? Flatten the one that I have with some elbow grease and lots of sand paper? Make my own table?!