E.W.Evans frame.
#1
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
F.W.Evans frame.
I've just bought this old F.W. Evans frame. I'd very much like to know more about it.
Evans which is known now for it's big chain of stores in London made frames themselves from the '20s through to the '70s, and build their reputation on touring bikes. They sold frames with their name on them, but not made by them, until not that long ago (perhaps ten years ago or so).
I've no idea of the date of mine, and I'm curious... I imagine that the forks (if they're original, although they look it) and the dropouts might give some clues... Also I've not seen the F on the side decal done in that way (like an E) on any other Evans bikes I've seen.
I love this frame. The paint's tatty but it's not rusty, I'll not repaint it, I'll try rather to touch up the paint.
What do you think about it?
Evans which is known now for it's big chain of stores in London made frames themselves from the '20s through to the '70s, and build their reputation on touring bikes. They sold frames with their name on them, but not made by them, until not that long ago (perhaps ten years ago or so).
I've no idea of the date of mine, and I'm curious... I imagine that the forks (if they're original, although they look it) and the dropouts might give some clues... Also I've not seen the F on the side decal done in that way (like an E) on any other Evans bikes I've seen.
I love this frame. The paint's tatty but it's not rusty, I'll not repaint it, I'll try rather to touch up the paint.
What do you think about it?
#2
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,106
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Liked 372 Times
in
177 Posts
I can't shed any additional light on this frame but it is very nice. Obviously it is a high quality frame to have campagnolo dropouts. I like the extra braze-ons, the front derailleur cable stop is really cool and I could use one on a few frames. The fork lamp mount is cool and the fork crown reminds me of the early 70's Raleigh competition which is nice. The craftsmanship seems to be nicer than the mass-produced bike boom brands, maybe it's pre 70's?
As much as I like the lug cut outs, they are extremely phallic!
As much as I like the lug cut outs, they are extremely phallic!
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#4
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
I've noticed that a photo on one of the editions of Richard Ballantine's 'Richard's Bicycle Book' (first edition was '72) has him with a F.W.Evans without braze ons for brake cables, with sloping shoulders on the fork crown and the 'E' looking F. There's also an article dating to '74 talking about the use of such fork crowns.
https://www.bikebrothers.co.uk/evans_scans.htm
https://www.bikebrothers.co.uk/evans_scans.htm
#5
juneeaa memba!
Join Date: Oct 2003
Location: boogled up in...Idaho!
Posts: 5,632
Bikes: Crap. The box is not big enough...
Likes: 0
Liked 3 Times
in
3 Posts
well, its a lovely bike, and the cutouts have big cajones...I think that the lamp mount would say pre-70s, but we've never gotten a definitive answer - was it the law at one time to have a front lamp on a road bike in Great Britain?
do you think that this is one that Evans actually manufactured?
do you think that this is one that Evans actually manufactured?
#7
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
I'm pretty sure that this bike was one that they made in the basement, I think the ones they had made outside were less idiosyncratic (as I remember them as a child in the early '80s, and as google seems to back up) - that Ballantine photo and that article make me think that it could well have been built by Harry Healey there.
Perhaps the lamp bracket puts it a bit earlier than Ballentine's bikes, so maybe late '60s. Seems plausible. There have I think long been UK laws requiring the use of lights on bicycles, but I think it's only in the last few years that policemen have started upholding those laws.
As an aside I had Richard's Bicycle Book as a boy, and it got me tinkering with bikes. I just ordered an old copy.
Perhaps the lamp bracket puts it a bit earlier than Ballentine's bikes, so maybe late '60s. Seems plausible. There have I think long been UK laws requiring the use of lights on bicycles, but I think it's only in the last few years that policemen have started upholding those laws.
As an aside I had Richard's Bicycle Book as a boy, and it got me tinkering with bikes. I just ordered an old copy.
#8
juneeaa memba!
Join Date: Oct 2003
Location: boogled up in...Idaho!
Posts: 5,632
Bikes: Crap. The box is not big enough...
Likes: 0
Liked 3 Times
in
3 Posts
I was told once that lamp brackets used to be required to be sold from bike shops. The law was changed and lamp brackets went the way of the three-speed freewheel. If the story was true then knowing when the law changed would help to date English bikes. I have a '49 Claud Butler with no lamp bracket, btw.
#9
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
I was looking at vintage British lightweights on the internet today - the bracket was ubiquitous before the '50's and then sharply declined in use, but I've seen one on an early '70's bike. If the frame was made in the basement of the shop the bracket could have been a custom option.
I haven't seen a luggless sloping shouldered fork crown on a pre-'70's bike though - has anyone else?
I haven't seen a luggless sloping shouldered fork crown on a pre-'70's bike though - has anyone else?
#10
Banned.
F. W. Evans used to be my LBS in '94 when I was stationed in London - I lived in Kennington my first year there. I know by then they were not building the frames there, but they were still using the exact artwork your frame has - and they also still used the old lamp bracket on the odd frame here and there, too! In fact, nearly every Evans frame in the showroom was built with touring in mind.
I ended up switching allegiances to Condor Cycles at Grays Inn Road, partly because I'd moved away from Kennington but mainly because one of Evans' mechanics broke the cable anchor off my Campy 50th Anniversary rear derailleur.
A year later, I was finally recompensed after they had exhausted their search for a replacement (in that time I found two complete sets and bought them both - I wish I had them today!)
I ended up switching allegiances to Condor Cycles at Grays Inn Road, partly because I'd moved away from Kennington but mainly because one of Evans' mechanics broke the cable anchor off my Campy 50th Anniversary rear derailleur.
A year later, I was finally recompensed after they had exhausted their search for a replacement (in that time I found two complete sets and bought them both - I wish I had them today!)
#11
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
Thanks Drillium Dude, interesting that the lamp brackets were used that late.
Are you sure it's quite the same artwork you remember? The bikebrothers site has scans of a mid '90's catalogue which shows a very similar F.W.EVANS decal, but with a conventional F rather than the one that curves in at the bottom making it look like an odd E - presumably a 'rationalised' design.
Are you sure it's quite the same artwork you remember? The bikebrothers site has scans of a mid '90's catalogue which shows a very similar F.W.EVANS decal, but with a conventional F rather than the one that curves in at the bottom making it look like an odd E - presumably a 'rationalised' design.
#13
Banned.
Thanks Drillium Dude, interesting that the lamp brackets were used that late.
Are you sure it's quite the same artwork you remember? The bikebrothers site has scans of a mid '90's catalogue which shows a very similar F.W.EVANS decal, but with a conventional F rather than the one that curves in at the bottom making it look like an odd E - presumably a 'rationalised' design.
Are you sure it's quite the same artwork you remember? The bikebrothers site has scans of a mid '90's catalogue which shows a very similar F.W.EVANS decal, but with a conventional F rather than the one that curves in at the bottom making it look like an odd E - presumably a 'rationalised' design.
#14
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
The difference in the logo is a very small one, to compare you can see the newer logo at the top of this page:
https://www.bikebrothers.co.uk/evans.htm
Nice story with the light boss.
https://www.bikebrothers.co.uk/evans.htm
Nice story with the light boss.
#15
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
I've been in contact with Nic Henderson of the Bike Brothers website and he concurs that the frame may well be from around the early '70's, perhaps a bit earlier, or perhaps a little later. Built in the basement of the old shop (they moved out in the late 70's). The fork crowns are Cinelli, which doesn't help in dating since the design seems to date to the '50's.
I've been de-rusting, spot priming painting and polishing the frame, and have some 27" rims with a sturmey archer 3 speed hub, some drops and a Brooks. Still some bits to get, but it's not far from roadworthy.
I've been de-rusting, spot priming painting and polishing the frame, and have some 27" rims with a sturmey archer 3 speed hub, some drops and a Brooks. Still some bits to get, but it's not far from roadworthy.
#16
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,106
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Liked 372 Times
in
177 Posts
Cool information. I'm excited to see how this one turns out.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#17
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
Here are some quick snapshots of what I've built from the frame. It's not finished yet, plenty of little ends to tidy up, but I'm happy with it, it rides really nicely and the old Brooks is fantastically comfortable.
#19
Excursionist
Thread Starter
Join Date: Jul 2007
Location: Lewisham, London, UK.
Posts: 48
Likes: 0
Liked 0 Times
in
0 Posts
The bars are Charge Bowl bars with the Charge logos sanded and polished off. I'm not generally a fan of fixed gear fashion items but they do the job very nicely, they're really very comfortable, and not terribly expensive.
#20
Senior Member
Very nice.Reminds me of this. My favorite cycling video.
https://www.youtube.com/watch?v=qyz5d3entBw
https://www.youtube.com/watch?v=qyz5d3entBw
#21
Artificial Member
Join Date: Jan 2010
Location: Cyberspace
Posts: 7,159
Bikes: Retrospec Judd, Dahon Boardwalk, Specialized Langster
Liked 5,564 Times
in
3,278 Posts
Very nice.Reminds me of this. My favorite cycling video.
https://www.youtube.com/watch?v=qyz5d3entBw
https://www.youtube.com/watch?v=qyz5d3entBw
#22
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,809
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Liked 575 Times
in
340 Posts
That is an exceptionally nice build. The handlebar looks great with the old stem.
An internet search reveals that your Charge Bowl bar is not available in the US. Bummer.
An internet search reveals that your Charge Bowl bar is not available in the US. Bummer.
#24
K2ProFlex baby!
What a sweet looking build! I love the stem! I had a few of them some time ago but got rid of them...what a dumbass I am!
__________________
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve
You see, their morals, their code...it's a bad joke, dropped at the first sign of trouble. They're only as good as the world allows them to be. I'll show you. When the chips are down, these...These "civilized" people...they'll eat each other. See, I'm not a monster. I'm just ahead of the curve