cyclo computer problem
#1
Member
Thread Starter
Join Date: Jun 2002
Location: orlando fla
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
cyclo computer problem
hi Everyone
My wife had a 20mph get off this last sunday when someone grabbed a big handfull of brake.Luckily she landed in the grass.My question is about the magnet for the computer .It now makes a slight sqeak when it passes the sensor.If any body has any ideas how to get it to stop i would appreciate it.This isn't a loud noise just enough to drive you batty.
Thanks To All
Jeff
My wife had a 20mph get off this last sunday when someone grabbed a big handfull of brake.Luckily she landed in the grass.My question is about the magnet for the computer .It now makes a slight sqeak when it passes the sensor.If any body has any ideas how to get it to stop i would appreciate it.This isn't a loud noise just enough to drive you batty.
Thanks To All
Jeff
#2
The Flying Scot
Join Date: Aug 2001
Location: North Queensferry Scotland and London (and France)
Posts: 1,904
Bikes: Custom (Colin Laing) 531c fast tourer/audax, 1964 Flying Scot Continental, 1995 Cinelli Supercorsa, Holdsworth Mistral single speed, Dahon Speed 6 (folder), Micmo Sirocco and a few more
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is it hitting the sensor? if so move it. It might be another part of the wheel is hitting a fender or part of the fork.
I'm aware of a tick when the sensor is passed but as it's a solid state thing can't see why it would squeek.
I'm aware of a tick when the sensor is passed but as it's a solid state thing can't see why it would squeek.
__________________
plus je vois les hommes, plus j'admire les chiens
1985 Sandy Gilchrist-Colin Laing built 531c Audax/fast tourer.
1964 Flying Scot Continental (531)
1995 Cinelli Supercorsa (Columbus SLX)
1980s Holdsworth Mistral fixed (531)
2005 Dahon Speed 6 (folder)
(YES I LIKE STEEL)
2008 Viking Saratoga tandem
2008 Micmo Sirocco Hybrid (aluminium!)
2012 BTwin Rockrider 8.1
plus je vois les hommes, plus j'admire les chiens
1985 Sandy Gilchrist-Colin Laing built 531c Audax/fast tourer.
1964 Flying Scot Continental (531)
1995 Cinelli Supercorsa (Columbus SLX)
1980s Holdsworth Mistral fixed (531)
2005 Dahon Speed 6 (folder)
(YES I LIKE STEEL)
2008 Viking Saratoga tandem
2008 Micmo Sirocco Hybrid (aluminium!)
2012 BTwin Rockrider 8.1
#3
Member
Thread Starter
Join Date: Jun 2002
Location: orlando fla
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi Chewa
Unfortunately it none of the above .Maybe the sensor got banged up .Some kind of internal damage??I've already had the front of her bike apart.So far we only have to replace her bars and one helmet.Maybe it will go away in time or she just didn't notice it until after the crash when she was paying really good attention.
Thanks
Jeff
Unfortunately it none of the above .Maybe the sensor got banged up .Some kind of internal damage??I've already had the front of her bike apart.So far we only have to replace her bars and one helmet.Maybe it will go away in time or she just didn't notice it until after the crash when she was paying really good attention.
Thanks
Jeff
#4
Senior Member
Join Date: Jun 2002
Location: Fort Collins, CO
Posts: 109
Bikes: Jamis Quest, Santa Cruz Blu, Miyata Seven Ten (early eighties)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Try taking the magnet off and see if it still does it. It may be something unrelated to the sensor and is just a coincidence that it happens when the magnet passes the sensor.