ISO and For Trade thread parts 2 and 3.
#7301
Banned.
ISO:
L concave collar (I think L and R are the same) for a Shimano DT shifter.
A nice 700c clincher set, 28f/32h, one of each.
8sp Campy wheelset in good to excellent condition, a cassette would be great on it.
or
8sp Campy hub set, 36h, Athena or Chorus, a cassette would be great on it.
Will have, if I find the above rolling gear:
7-sp Campy wheelset, Chorus hubs, Sun M14A rims, trued and tensioned with new spokes and nipples, with freewheel.
7-sp Chorus crankset w/Italian BB
7-sp Chorus FD
7-sp both Chorus and Athena RD
7-sp Chorus brake levers w/good white hoods (aero)-see below re: calipers
7-sp Chorus Syncro shifters.
I may trade 7-sp era Chorus monoplaners for 8-sp era Chorus calipers depending on condition.
Have:
600 tricolor hubset, 32 front, 36 rear, 7-sp UG freehub, hubs in exc condition, no skewers
Araya CTL-370 rims, 32 front, 36 rear, no brake wear, no rust, very nice condition, decals excellent.
L concave collar (I think L and R are the same) for a Shimano DT shifter.
A nice 700c clincher set, 28f/32h, one of each.
8sp Campy wheelset in good to excellent condition, a cassette would be great on it.
or
8sp Campy hub set, 36h, Athena or Chorus, a cassette would be great on it.
Will have, if I find the above rolling gear:
7-sp Campy wheelset, Chorus hubs, Sun M14A rims, trued and tensioned with new spokes and nipples, with freewheel.
7-sp Chorus crankset w/Italian BB
7-sp Chorus FD
7-sp both Chorus and Athena RD
7-sp Chorus brake levers w/good white hoods (aero)-see below re: calipers
7-sp Chorus Syncro shifters.
I may trade 7-sp era Chorus monoplaners for 8-sp era Chorus calipers depending on condition.
Have:
600 tricolor hubset, 32 front, 36 rear, 7-sp UG freehub, hubs in exc condition, no skewers
Araya CTL-370 rims, 32 front, 36 rear, no brake wear, no rust, very nice condition, decals excellent.
Last edited by RobbieTunes; 10-25-11 at 09:38 AM.
#7302
Robbie, I have some of those DT collars, both sides are the same. Gray or chrome? Sure you don't need a flattie? PM me your address and I'll drop one in the mail.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#7303
Newbie
Join Date: Oct 2011
Location: Waco, TX
Posts: 1
Bikes: 88 Raleigh Technium Prestige Tri-lite/mid 70's Grand Prix (work in progress)
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
26 TPI headset, for Nottigham made Raleigh
Simplex Super LJ front/rear derailleur
26 TPI headset, for Nottigham made Raleigh
Simplex Super LJ front/rear derailleur
#7304
Oh Snap, not again...
Join Date: Mar 2010
Location: Cardiff, Ca
Posts: 606
Likes: 0
Liked 0 Times
in
0 Posts
ISO 86 BCD chainrings to fit an SR "custom" crankset, looking for a mid range ring ~39-42 t and a bailout ~30-34t.
For trade, Schwinn Approved chrome/steel/rust wheel set (needs truing), bunch of cannibalized side pull brake calipers
Suntour ProCompe 14-17-19-21-24 freewheel (decent shape, 17t cog shows most wear)
Some of that metal/coiled deraileur cable housing that some people like alot.
For trade, Schwinn Approved chrome/steel/rust wheel set (needs truing), bunch of cannibalized side pull brake calipers
Suntour ProCompe 14-17-19-21-24 freewheel (decent shape, 17t cog shows most wear)
Some of that metal/coiled deraileur cable housing that some people like alot.
#7305
Wookie Jesus inspires me.
ISO 86 BCD chainrings to fit an SR "custom" crankset, looking for a mid range ring ~39-42 t and a bailout ~30-34t.
For trade, Schwinn Approved chrome/steel/rust wheel set (needs truing), bunch of cannibalized side pull brake calipers
Suntour ProCompe 14-17-19-21-24 freewheel (decent shape, 17t cog shows most wear)
Some of that metal/coiled deraileur cable housing that some people like alot.
For trade, Schwinn Approved chrome/steel/rust wheel set (needs truing), bunch of cannibalized side pull brake calipers
Suntour ProCompe 14-17-19-21-24 freewheel (decent shape, 17t cog shows most wear)
Some of that metal/coiled deraileur cable housing that some people like alot.
#7306
Cat 6
Originally Posted by RobbieTunes
If I could lace all my hubs to NOS CTL-370's, I would, even the Italians....
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
Last edited by Ex Pres; 10-26-11 at 12:58 PM.
#7308
Senior Member
Anyone have some old/beat/rusty Lyotard pedals that they'll never use? I need spindles for a set of 460d's that I have, which have 1/2" threaded spindles. I can use French or 9/16" threaded spindles. I'm willing to bet that spindles are interchangeable between some Lyotard models, provided the lengths are the same.
#7309
Have: What seems to be a NOS Suntour Superbe Pro Bottom bracket. Missing the dust sleeve, but not a single mark on either end of the spindle. Has a spot or two of grease from someone's smudgy finger possibly. Comes with the chromed bolts and all. 109 mm 1.37 x 24t
Make an offer of parts? I need more than anything at the moment...100mm x 22.2 stems and the bars to go with them. Prefer Nitto or equivalent quality. Bars have to be 42cm or larger please, I have wide shoulders
Also have Suntour Sprint RD. Much of the logo is gone and hanger bolt is missing but springs are strong. Good looking piece overall. Looking for a Cyclone M-II that looks "not ragged out or wrecked" Missing logo and dull okay. I can polish it, and the front it is to match isn't perfect. If a trade isn't acceptable, then does anyone have a bolt?,,,,BD
Make an offer of parts? I need more than anything at the moment...100mm x 22.2 stems and the bars to go with them. Prefer Nitto or equivalent quality. Bars have to be 42cm or larger please, I have wide shoulders
Also have Suntour Sprint RD. Much of the logo is gone and hanger bolt is missing but springs are strong. Good looking piece overall. Looking for a Cyclone M-II that looks "not ragged out or wrecked" Missing logo and dull okay. I can polish it, and the front it is to match isn't perfect. If a trade isn't acceptable, then does anyone have a bolt?,,,,BD
__________________
So many bikes, so little dime.
So many bikes, so little dime.
#7310
There was a thread today about toying with the idea of trading a Super Record group for Campy 10 speed. That got me thinking.
Feeler - anyone interested in trading my mostly Campy C Record group with 8 speed brifters for their Campy 10 speed group, preferably Record?
Feeler - anyone interested in trading my mostly Campy C Record group with 8 speed brifters for their Campy 10 speed group, preferably Record?
#7311
Banned
That is what I would term an optimistic trade. You are better off selling the C Record and using the cash towards a modern setup. BTW, 8 speed freehubs do not work with 10 speed Campy.
#7314
Banned
Sell the C Record, pictures sell more than words.
#7315
Banned.
...but if you want to start selling, I need Campy 8-sp wheels... I'm about ready to punt, buy Aksiums and use 8-sp 105 cassette with Wheels Mfg spacers....
#7316
Seņor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
Are you a clincher or tubular guy? I have an 8s tubular wheelset I might be selling soon. C-Record hubs laced to Campagnolo Hardox Pave tubulars. I can't decide if I want to sell my Century complete with C-Record group, sell the group complete with wheels, or part out the group... Piece by piece on ebay would be most lucrative I'm assuming but don't really want to deal with it.
#7317
Senior Member
if i were still running 8spd. any pictures...
what are you building robbie? my dad has a pair of late (updated) spinergy rev-x wheels with a campagnolo 8spd freehub. i dont know what he would want for them, but i bet he would part with them.
what are you building robbie? my dad has a pair of late (updated) spinergy rev-x wheels with a campagnolo 8spd freehub. i dont know what he would want for them, but i bet he would part with them.
#7319
Sometimes C Record goes for crazy $$ on eBay, not here, though. I doubt anyone here would trade 10 speed Record for C Record. If they've made the switch, they aren't going back. Maybe Mirage/Veloce, but not Record 10.
Sell the C Record, pictures sell more than words.
Sell the C Record, pictures sell more than words.
yep. i just unloaded a C Record group with 1st gen RD and seat post, Mavic Open Pros and Cobaltos for nearly $1800 (everything sold separately)
what does a Record 10 group go for?
#7320
Seņor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
Without wheels... You can find an older group in the 5-600 range if you're patient, a little higher than that is probably the norm.
#7321
Senior Member
10spd was around a long time and was made at many different levels. i recently saw a late record 10spd groups sell north of $1200 with wheels. keep in mind the last few years of 10spd record is lighter than most groups available today. i think only sram red, super record 11, and record 11 come in less (and only by 100-150g) it is ~1lb ligher than the current ultegra offering.
#7322
Seņor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
Piece together a group (not all Record) for less than that here... https://forums.serotta.com/showthread.php?t=98676
#7323
Senior Member
Piece together a group (not all Record) for less than that here... https://forums.serotta.com/showthread.php?t=98676
#7325
Seņor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Likes: 0
Liked 3 Times
in
3 Posts
I have a set of nuovo Tipo HF hubs I will never use, laced to mismatched rims (one of them steel) with a 5s freewheel I don't have a tool for... I could cut them out but that might make freewheel removal difficult. PM me if interested.