how do you use this valve?
#1
Senior Member
Thread Starter
Join Date: Oct 2012
Posts: 63
Likes: 0
Liked 0 Times
in
0 Posts
how do you use this valve?
https://www.bytrade.com/factory-1/sup...tire-valve.htm
Like the description says, I have 20 x 1.5 tubes for my trailer and it came with this type of valve, someone newb me please.
Like the description says, I have 20 x 1.5 tubes for my trailer and it came with this type of valve, someone newb me please.
#5
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Likes: 0
Liked 16 Times
in
15 Posts
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#6
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
It is the standard valve found on bicycles sold in Germany, The Netherlands and perhaps other countries. A pump that works on presta valve will work. Screw on adapters are available will fit standard automobile pumps.
#7
Senior Member
The usual way I use them is,
unscrew the plastic cap, then the large nut just below it(holds the valve core in place). this lets all the air out.
next unscrew any nut at the base of the valve; so you can push it out of the rim.
dismount tire, pull the inner tube out.
toss it in the trash.
reinstall and reinflate tire with a shraeder valve tube.
unscrew the plastic cap, then the large nut just below it(holds the valve core in place). this lets all the air out.
next unscrew any nut at the base of the valve; so you can push it out of the rim.
dismount tire, pull the inner tube out.
toss it in the trash.
reinstall and reinflate tire with a shraeder valve tube.
#8
Curmudgeon
Join Date: Aug 2005
Location: Nausea, New Hamster
Posts: 1,572
Bikes: (see https://wildavis.smugmug.com/Bikes) Bianchi Veloce (2005), Nishiki Cascade (1992), Schwinn Super Sport (1983)
Likes: 0
Liked 4 Times
in
4 Posts
The usual way I use them is,
unscrew the plastic cap, then the large nut just below it(holds the valve core in place). this lets all the air out.
next unscrew any nut at the base of the valve; so you can push it out of the rim.
dismount tire, pull the inner tube out.
toss it in the trash.
reinstall and reinflate tire with a shraeder valve tube.
unscrew the plastic cap, then the large nut just below it(holds the valve core in place). this lets all the air out.
next unscrew any nut at the base of the valve; so you can push it out of the rim.
dismount tire, pull the inner tube out.
toss it in the trash.
reinstall and reinflate tire with a shraeder valve tube.
(please note!)
- Wil
#9
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Likes: 0
Liked 16 Times
in
15 Posts
You're missing out a step! In order to fit a Schrader valve you will need to drill the rim hole wider to accommodate the thicker valve stem. Isn't it curious, I do the exact opposite of you, and fit a sleeve or rubber grommet to accommodate the thinner stem of the Presta valve! it is generally recognized that Presta valves are far superior to Schrader valves!
(please note!)
- Wil
(please note!)
- Wil
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#11
#12
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
A 50¢ adapter can be screwed on (and left on) that allows any Dunlop valve to be filled with an auto/bike pump that is fitted for an automobile/schrader valve.
Last edited by I-Like-To-Bike; 03-10-13 at 11:42 AM. Reason: Add pictures of adapter
#13
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
Or fancy pants roadies who buy into all the Kool Aid Brand "Truths" spouted out by the "experts."
#14
So long as we all agree that their pants are fancy.
#15
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
#17
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Likes: 0
Liked 16 Times
in
15 Posts
Three of those bikes came from either Germany or Denmark. The other is a vintage Raleigh roadster.
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#18
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,700
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Liked 4,537 Times
in
2,522 Posts
You are quite a bit behind the times on pumps too. Every pump I have bought in the last 25 years has had the ability to pump up either presta or schrader by simply reversing the grommet in the pump head. You'd have to go out of your way to find a pump without that feature. I'm sure having the ability to do either presta or schrader adds significantly to the cost of the pump...like 15 cents or so. Oh, the humanity.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#19
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
Urban legend if your only exposure to European bicycling is the TDF.
Last edited by I-Like-To-Bike; 03-11-13 at 10:10 AM.
#20
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
Sure, just let me walk the 15 miles to the gas station and use a compressor that is meant to pump up a 30 psi car tire. That'll be useful.
You are quite a bit behind the times on pumps too. Every pump I have bought in the last 25 years has had the ability to pump up either presta or schrader by simply reversing the grommet in the pump head. You'd have to go out of your way to find a pump without that feature.
You are quite a bit behind the times on pumps too. Every pump I have bought in the last 25 years has had the ability to pump up either presta or schrader by simply reversing the grommet in the pump head. You'd have to go out of your way to find a pump without that feature.
Not everybody buys their bicycle pumps or bike accessories at an LBS. The big box stores, the stores that sell the majority of bikes in the U.S., have lots of pumps on for sale that do NOT have any way to pump up a Presta valved tube.
#21
Membership Not Required
Join Date: Jan 2005
Location: On the road-USA
Posts: 16,855
Bikes: Giant Excursion, Raleigh Sports, Raleigh R.S.W. Compact, Motobecane? and about 20 more! OMG
Likes: 0
Liked 16 Times
in
15 Posts
Sure, just let me walk the 15 miles to the gas station and use a compressor that is meant to pump up a 30 psi car tire. That'll be useful.
You are quite a bit behind the times on pumps too. Every pump I have bought in the last 25 years has had the ability to pump up either presta or schrader by simply reversing the grommet in the pump head. You'd have to go out of your way to find a pump without that feature. I'm sure having the ability to do either presta or schrader adds significantly to the cost of the pump...like 15 cents or so. Oh, the humanity.
You are quite a bit behind the times on pumps too. Every pump I have bought in the last 25 years has had the ability to pump up either presta or schrader by simply reversing the grommet in the pump head. You'd have to go out of your way to find a pump without that feature. I'm sure having the ability to do either presta or schrader adds significantly to the cost of the pump...like 15 cents or so. Oh, the humanity.
Aaron
__________________
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
Webshots is bailing out, if you find any of my posts with corrupt picture files and want to see them corrected please let me know. :(
ISO: A late 1980's Giant Iguana MTB frameset (or complete bike) 23" Red with yellow graphics.
"Cycling should be a way of life, not a hobby.
RIDE, YOU FOOL, RIDE!"_Nicodemus
"Steel: nearly a thousand years of metallurgical development
Aluminum: barely a hundred
Which one would you rather have under your butt at 30mph?"_krazygluon
#22
Senior Member
Join Date: Dec 2004
Location: Middle of da Mitten
Posts: 12,493
Bikes: Trek 7500, RANS V-Rex, Optima Baron, Velokraft NoCom, M-5 Carbon Highracer, Catrike Speed
Liked 755 Times
in
463 Posts
If it 'twere me, I'd simply replace the tubes to match the valves on my bikes. That way, no fiddling with adapters.
#23
Duh what's the sense in investing in a market that doesn't even really exist? Who would use a valve that provides no special advantage to the other two, but requires a special adapter? But I guess I'm not familiar with what bikers in Europe use, so to each his own...
#24
Been Around Awhile
Join Date: Oct 2004
Location: Burlington Iowa
Posts: 30,118
Bikes: Vaterland and Ragazzi
Liked 1,649 Times
in
1,110 Posts
I believe bikes in India also use Dunlop valves, but I am not sure of that. Anyone know what kind of tube valves are found on bikes sold in India or China?
#25
Senior Member
Join Date: Jun 2012
Location: SF Bay Area
Posts: 1,261
Bikes: 2012 Specialized Sirrus
Likes: 0
Liked 1 Time
in
1 Post
When I rode bikes in India, I wasn't aware that there were different types of valves at all Never owned a pump in India - just went to the neighborhood repair shop. Remembering over the years, I think there were 6 bike repair shops in a 1 km radius around my house - and this was true pretty much anywhere I rode. Tried to find the info off a local manufacturer's website, but no luck.