Android and Bluetooth 4.0 sensors
#1
Senior Member
Thread Starter
Join Date: Jul 2003
Location: San Diego
Posts: 597
Bikes: '11 Allez Comp, '09 Pinarello Pista
Likes: 0
Liked 0 Times
in
0 Posts
Android and Bluetooth 4.0 sensors
Is anyone here using Bluetooth 4.0 sensors with an android phone? I'm looking into creating a setup similar to the Wahoo bike setup using nRF or Biketastic.
For those of you that don't know Bluetooth 4.0 has some HUGE battery savings over ANT+ and should allow phones to run for most of a day while recording data. Ideally I'd love to have strava running in the background while using nRF to see what my heart rate and cadence are.
I think its interesting that there is already complete packages for the IOS, but next to nothing for the android. what do you all think?
For those of you that don't know Bluetooth 4.0 has some HUGE battery savings over ANT+ and should allow phones to run for most of a day while recording data. Ideally I'd love to have strava running in the background while using nRF to see what my heart rate and cadence are.
I think its interesting that there is already complete packages for the IOS, but next to nothing for the android. what do you all think?
#2
Senior Member
I am not using any BT 4.0 devices, but I have looked into it. I will say that you should be very careful to check any compatibility issues before you sink any money into equipment. Not all Android phones are capable of BT 4.0, and of the ones that are, it's my understanding that not all of them have the necessary coding in the OS to take full advantage. I suspect that's why items are being rolled out faster to iOS: The last two phones AFAIK have fully implemented BT 4.0. Build for iOS and a large percentage of their users are ready to go. Market to Android and there are questions about whether you phone has the physical hardware and whether it has the required bluetooth stack.
Not bike-related, but I was looking into StickNFind, and what I found was that many people seem to have bought it and/or supported the original kickstarter under the assumption that it would work with their phone, and they were upset to find out that it did not. Sometimes because they hadn't paid attention to their phone's specs, but sometimes because the phone's software hadn't been brought current. Until 4.0 becomes more standard, it doesn't surprise me that most manufacturers start with iOS.
I did look into bike-specific stuff a few months back along the lines of what you are looking for, and I also didn't come up with much luck on the Android side, so hopefully someone has a success story.
Not bike-related, but I was looking into StickNFind, and what I found was that many people seem to have bought it and/or supported the original kickstarter under the assumption that it would work with their phone, and they were upset to find out that it did not. Sometimes because they hadn't paid attention to their phone's specs, but sometimes because the phone's software hadn't been brought current. Until 4.0 becomes more standard, it doesn't surprise me that most manufacturers start with iOS.
I did look into bike-specific stuff a few months back along the lines of what you are looking for, and I also didn't come up with much luck on the Android side, so hopefully someone has a success story.
#3
Senior Member
Thread Starter
Join Date: Jul 2003
Location: San Diego
Posts: 597
Bikes: '11 Allez Comp, '09 Pinarello Pista
Likes: 0
Liked 0 Times
in
0 Posts
I have a GSIII so it should be supported by nRF, and some people are using sensors already (as stated on the review section) so I'm hopeful it "will work." However. I'm finding that there is just a serious lack of software for doing anything with it.....
Thread
Thread Starter
Forum
Replies
Last Post
lardo20
Electronics, Lighting, & Gadgets
21
09-20-17 07:38 PM
mikeronson
Electronics, Lighting, & Gadgets
12
07-31-15 10:17 AM