Bike trainer question...looking for opinions
#1
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Southern Eastern Wisconsin. Milwaukee area
Posts: 13
Bikes: None yet
Likes: 0
Liked 0 Times
in
0 Posts
Bike trainer question...looking for opinions
I live in Wisconsin which is a state where the winter weather is not very conducive to winter bike riding. I dont want to shut the riding down during these months but would love to continue using a bike trainer in my basement. Does anyone have any suggestions as to which trainer to buy?
A little background..I am now a 450 pound Clyde (down from 501 at the start of the summer) and have a sturdy steel mountain bike for a ride. Do bike trainers have weight limits (I assume yes)?
Looking for any and all suggestions.
Thanks
A little background..I am now a 450 pound Clyde (down from 501 at the start of the summer) and have a sturdy steel mountain bike for a ride. Do bike trainers have weight limits (I assume yes)?
Looking for any and all suggestions.
Thanks
#2
Senior Member
Join Date: Aug 2011
Location: Las Vegas
Posts: 325
Bikes: 2013 CAAD 8 6 Black/Red
Likes: 0
Liked 0 Times
in
0 Posts
Kurt Kinetic makes an awesome trainer. They have a couple of different modes, and if your bike can handle your weight, I think they can too. They're pretty damn sturdy.
#3
Senior Member
Join Date: Jul 2010
Location: Victoria, Canada
Posts: 1,541
Bikes: Cannondale t1, Koga-Miyata World Traveller
Likes: 0
Liked 3 Times
in
3 Posts
The Kurt Kinetic Road Machine will handle your weight.
I have the Kurt Kinetic Rock and Roll and it tops out at 250 lbs.
Kurt Kinetic trainers are great.
Particularly with the accessory fly-wheel.
I have the Kurt Kinetic Rock and Roll and it tops out at 250 lbs.
Kurt Kinetic trainers are great.
Particularly with the accessory fly-wheel.
#4
Senior Member
How do you like the Rock and Roll? I have a Kurt Kinetic Road Machine and it bores the heck out of me! I hate that the Road Machine feels nothing like a real bike and have been tempted to upgrade to the Rock and Roll; just not sure if it's a big difference from any other stationary trainer...
#7
Commuter & cyclotourist
Join Date: Feb 2009
Location: Hadley, MA, USA
Posts: 496
Bikes: Boulder All Road, Surly Long Haul Trucker, Bike Friday New World Tourist, Breezer Uptown 8, Bike Friday Express Tikit, Trek MultiTrack 730 (Problem? No, I don't have a problem)
Likes: 0
Liked 0 Times
in
0 Posts
If you have the space and the cash, I'd suggest looking into rollers. TruTrainer rollers have a built-in flywheel resistance mechanism that effectively mimics the wind resistance you get by riding outside; other brands, such as Kreitler, offer resistance units as an add-on. I have TruTrainer rollers and am very happy with them, though in hindsight I wish I had bought the model that lets you disconnect the resistance.
I recommend rollers rather than a trainer for two reasons: the resistance is proportional to speed (at least with TruTrainer), so you can change resistance just by shifting gears, and riding rollers is less boring than a trainer, because you have to pay attention so as not to fall off. They really do teach you to hold your line.
Try before buying, though, if you decide to go with rollers. Some people find them hard to master.
I recommend rollers rather than a trainer for two reasons: the resistance is proportional to speed (at least with TruTrainer), so you can change resistance just by shifting gears, and riding rollers is less boring than a trainer, because you have to pay attention so as not to fall off. They really do teach you to hold your line.
Try before buying, though, if you decide to go with rollers. Some people find them hard to master.
__________________
--
Brian Ogilvie, Hadley, MA, USA
--
Brian Ogilvie, Hadley, MA, USA
#9
I find trainers mind-numbing. Have a diversion like music or TV. Also, a fan blowing on you helps. So does a towel or something to catch the sweat. Once upon a time you could buy a tailored terry cloth thingly that covered your headset and top tube to absorb the dripping sweat. Maybe this still make them.
#10
https://www.amazon.com/CycleOps-Bicyc.../dp/B000BTA6O0
I have one and it really works - stops your sweat from corroding your headset etc.
#11
Senior Member
Working with intervals and other structured trainer session such as spinnervals and sufferfest will help the time pass while getting you a definite benefit to doing the work. Just getting on the trainer and ticking over the miles/time will get boring very quickly and won't really net you too much if any benefit.
I have a Kurt Kinetic and also some rollers that I use for training and moreso over our last winter which is just ending. My stuff is track focussed, so a little different, but I find it very hard to concentrate on sticking to the specific structure of my roller session as I also focus on purely keeping upright. It didn't take me too long to get the feel for the rollers, but I have a routing that gets me spinning at up to 130rpm for a minute, by working up in steps. I find it really hard to keep the focus on just staying on the rollers while also paying attention to keeping my rpm steady and high.
If you can, try some rollers and see how you go. Adjustable resistance rollers would be neat, but I would be very hesitant if you haven't used rollers before. A mag or fluid trainer would be the best bet, and unless you have specific reasons to get a higher end one, a lower spec model that is cheaper should suit most people's needs.
I have a Kurt Kinetic and also some rollers that I use for training and moreso over our last winter which is just ending. My stuff is track focussed, so a little different, but I find it very hard to concentrate on sticking to the specific structure of my roller session as I also focus on purely keeping upright. It didn't take me too long to get the feel for the rollers, but I have a routing that gets me spinning at up to 130rpm for a minute, by working up in steps. I find it really hard to keep the focus on just staying on the rollers while also paying attention to keeping my rpm steady and high.
If you can, try some rollers and see how you go. Adjustable resistance rollers would be neat, but I would be very hesitant if you haven't used rollers before. A mag or fluid trainer would be the best bet, and unless you have specific reasons to get a higher end one, a lower spec model that is cheaper should suit most people's needs.
#12
Senior Member
I have a CycleOps Fluid 2 trainer sitting in the box, unopened. It arrived on Friday and we have had a death in the family, etc. and I've yet to get it out. If the OP would like I'll do an unpack so he/she can see what's in there.
#14
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 19,349
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Liked 13,197 Times
in
6,776 Posts
So does a towel or something to catch the sweat. Once upon a time you could buy a tailored terry cloth thingly that covered your headset and top tube to absorb the dripping sweat. Maybe this still make them.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#15
Banned
Stationary stands are notoriously hard on nice bikes,
stationary trainer that can be set up to resemble your real bike fit will be OK.
Theres these https://www.lemondfitness.com/product...mond-revmaster
there are some oodles cheaper of the style. use your 9/16" pedals and seat.
adjust seat angle and reach and height.
Sharing? a numbered scale will let 2 different people adjust 1 trainer to suit them ..
or of course the beater on the stand with rear wheel clamped in place will do,
get the set up adequate, and then the wear and tear on the real bike wont happen.
stationary trainer that can be set up to resemble your real bike fit will be OK.
Theres these https://www.lemondfitness.com/product...mond-revmaster
there are some oodles cheaper of the style. use your 9/16" pedals and seat.
adjust seat angle and reach and height.
Sharing? a numbered scale will let 2 different people adjust 1 trainer to suit them ..
or of course the beater on the stand with rear wheel clamped in place will do,
get the set up adequate, and then the wear and tear on the real bike wont happen.
Last edited by fietsbob; 09-24-13 at 01:44 PM.
#16
Senior Member
Join Date: May 2011
Location: Brodhead, WI - south of Madison
Posts: 2,928
Bikes: 2009 Trek 1.2
Likes: 0
Liked 3 Times
in
1 Post
At your size, rollers would be a bad idea.
Get a good mag or fluid trainer, whatever your budget will allow. Consider looking for a used one on Craigslist.
Put a slick or smooth tire on the rear tire of your MTB and pedal all winter long.
Yes, they can be boring, however, music helps me. And I've been known to do 2 hour sessions on the trainer. Intervals definitely help during long sessions and they'll be good for you come next season. Definitely consider a fan. Otherwise you're just dripping sweat on the bike and below.
FWIW, I'm in WI too (Milwaukee, south side). This year rather than being inside I believe my trainer set up will be out in the garage, so I'm going to need a heater. I'm also contemplating pulling the trigger on Sufferfest or something similar. Laptop, speakers and my goals. I don't know ... I find winter trainer riding somewhat therapeutic. It beats sitting around idle all winter. But when spring begins to arrive, I get antsy and tire of the trainer.
Get a good mag or fluid trainer, whatever your budget will allow. Consider looking for a used one on Craigslist.
Put a slick or smooth tire on the rear tire of your MTB and pedal all winter long.
Yes, they can be boring, however, music helps me. And I've been known to do 2 hour sessions on the trainer. Intervals definitely help during long sessions and they'll be good for you come next season. Definitely consider a fan. Otherwise you're just dripping sweat on the bike and below.
FWIW, I'm in WI too (Milwaukee, south side). This year rather than being inside I believe my trainer set up will be out in the garage, so I'm going to need a heater. I'm also contemplating pulling the trigger on Sufferfest or something similar. Laptop, speakers and my goals. I don't know ... I find winter trainer riding somewhat therapeutic. It beats sitting around idle all winter. But when spring begins to arrive, I get antsy and tire of the trainer.
#18
I used to agree. However, after almost getting flattened on a dark 'quiet' road two winters ago I bought the CycleOps. I also bought some of the Sufferfest videos but though the video was somewhat entertaining the music was/is terrible. Lots of 'Indie' garage-band tracks that you've never heard of that get old and repetitive. I'd rather watch reruns of Family Guy or Breaking Bad instead.
#19
Senior Member
Here is a video of a guy trying to learn to use rollers. While I am sure that you quickly get the hang of it I would throw this thing all the way through my garage door and set it on fire using some handy gasoline.
https://www.youtube.com/watch?v=E2tF0tK7P_s
https://www.youtube.com/watch?v=E2tF0tK7P_s
#20
Commuter & cyclotourist
Join Date: Feb 2009
Location: Hadley, MA, USA
Posts: 496
Bikes: Boulder All Road, Surly Long Haul Trucker, Bike Friday New World Tourist, Breezer Uptown 8, Bike Friday Express Tikit, Trek MultiTrack 730 (Problem? No, I don't have a problem)
Likes: 0
Liked 0 Times
in
0 Posts
Looking down at the rollers or your front wheel is a bad idea. Best to look at a fixed object in the middle to long distance, and use your sense of balance to keep the bike straight.
__________________
--
Brian Ogilvie, Hadley, MA, USA
--
Brian Ogilvie, Hadley, MA, USA
#21
Here is a video of a guy trying to learn to use rollers. While I am sure that you quickly get the hang of it I would throw this thing all the way through my garage door and set it on fire using some handy gasoline.
https://www.youtube.com/watch?v=E2tF0tK7P_s
https://www.youtube.com/watch?v=E2tF0tK7P_s
#22
Ancient Clydesdale
Here is a video of a guy trying to learn to use rollers. While I am sure that you quickly get the hang of it I would throw this thing all the way through my garage door and set it on fire using some handy gasoline.
https://www.youtube.com/watch?v=E2tF0tK7P_s
https://www.youtube.com/watch?v=E2tF0tK7P_s
Counterpoint:
#23
Senior Member
I have no doubt that once you get used to it you receive a very realistic-as-possible experience. I think getting to that point would result in lots of damage to me and my surrounding area.
#24
Senior Member
Join Date: Jan 2012
Posts: 85
Likes: 0
Liked 0 Times
in
0 Posts
I have the Kurt Kinetic Rock and Roll and do intervals by standing. Worth every penny. I don't find it boring since I'm doing intervals... though I suppose if you only ride a set speed the entire time it would get kind of boring?
#25
Senior Member
Just remember that those $850 E-Motion rollers aren't quite the same as your garden variety rollers...