Goal is to assemble my own bike
#1
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Portland, Or
Posts: 395
Bikes: | Surly Disc-Trucker| unknown city bike |M80 Raleigh |09 Trek 1.2|
Likes: 0
Liked 0 Times
in
0 Posts
Goal is to assemble my own bike
Hello
My name is Tim, and I have a goal of assembling my own bike this year. Since I am not a mechanic I do plan on using a local co-op for a work station, and support. Since this is my first attempt at assembling a bike I have decided to use the available parts that have been replaced from other bikes. In addition I have also budgeted 150 dollars for additional parts like wire housing.
First consideration
I am using a Townie 21d for the frame, and would like to replace the suspension fork with a rigid fork. I have a surly 1x1 suspension corrected fork which was used on a previous MTB bike that is no longer in use. What I am wondering is, if I can take the cups from the old frame, and just repress them into the townie frame so that I can reuse the headset?
The other place I have questions is with the drive train. The frame came with a triple, and I would like to convert it to a double. Are there any concerns with this change?
Thanks in advance for any information.
Tim
My name is Tim, and I have a goal of assembling my own bike this year. Since I am not a mechanic I do plan on using a local co-op for a work station, and support. Since this is my first attempt at assembling a bike I have decided to use the available parts that have been replaced from other bikes. In addition I have also budgeted 150 dollars for additional parts like wire housing.
First consideration
I am using a Townie 21d for the frame, and would like to replace the suspension fork with a rigid fork. I have a surly 1x1 suspension corrected fork which was used on a previous MTB bike that is no longer in use. What I am wondering is, if I can take the cups from the old frame, and just repress them into the townie frame so that I can reuse the headset?
The other place I have questions is with the drive train. The frame came with a triple, and I would like to convert it to a double. Are there any concerns with this change?
Thanks in advance for any information.
Tim
#2
Mechanic/Tourist
Not enough info to provide much help. Specs can vary on forks quite a bit - it's not just a matter of the cups. If you replace the entire crankset (spindle) included with one compatible with your frame (again, several specs to consider) then should not be a problem. Other parts from different bikes need to also be compatible. If you have a local bike co-op available I see no reason to depend on remote assistance, as most things are much easier for someone to show in-person than to explain in print.
#3
Senior Member
There is a difference between what'll go together mechanically and what will enjoyable to ride.
But if both the donor bike and the receiving bike has the same diameter headtube, then the headset will transfer. For the fork to transfer the steerer tube has to be long enough.
For the bike to ride nicely - if it did with the old fork - the new fork has to have a similar axle-to-crown measurement and about the same amount of rake.
Depending on what type of BB it is, changing from a triple to a double will often require replacing the bottom bracket to get a sensible chainline, and/or chainstay clearance.
For a Frankenbike type of ride I wouldn't bother replacing a functioning crank.
If you don't need the granny, just don't use it. The drawback to leaving it in place is minimal.
But if both the donor bike and the receiving bike has the same diameter headtube, then the headset will transfer. For the fork to transfer the steerer tube has to be long enough.
For the bike to ride nicely - if it did with the old fork - the new fork has to have a similar axle-to-crown measurement and about the same amount of rake.
Depending on what type of BB it is, changing from a triple to a double will often require replacing the bottom bracket to get a sensible chainline, and/or chainstay clearance.
For a Frankenbike type of ride I wouldn't bother replacing a functioning crank.
If you don't need the granny, just don't use it. The drawback to leaving it in place is minimal.
#4
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Portland, Or
Posts: 395
Bikes: | Surly Disc-Trucker| unknown city bike |M80 Raleigh |09 Trek 1.2|
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the assistance.
I'll measure the steerer tube when I get home from work. The townie head tube seems really long, but does measure at 1 1/8" which is the same as the old frame. Will take pictures and post them.
Understand the reasoning behind the crank, so will leave it alone.
Thanks again
Tim
I'll measure the steerer tube when I get home from work. The townie head tube seems really long, but does measure at 1 1/8" which is the same as the old frame. Will take pictures and post them.
Understand the reasoning behind the crank, so will leave it alone.
Thanks again
Tim
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Liked 645 Times
in
366 Posts
That's probably going to be a deal killer.
Honestly, I'm thinking that Townie frame is just enough out of the mainstream to make it a bit more challenging for your first assembly attempt.
Honestly, I'm thinking that Townie frame is just enough out of the mainstream to make it a bit more challenging for your first assembly attempt.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#6
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Portland, Or
Posts: 395
Bikes: | Surly Disc-Trucker| unknown city bike |M80 Raleigh |09 Trek 1.2|
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, and the townie frame has always been there to haunt me. My thought is to not plan past the fork, and if that does not fit I'll replace the frame.
Will know it about 3 hours when I get off work.
Will know it about 3 hours when I get off work.
#7
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Portland, Or
Posts: 395
Bikes: | Surly Disc-Trucker| unknown city bike |M80 Raleigh |09 Trek 1.2|
Likes: 0
Liked 0 Times
in
0 Posts
Thanks Tim
#8
Banned
Since I am not a mechanic I do plan on using a local co-op for a work station, and support.
Will know it about 3 hours when I get off work.
Does anyone here Not Write from the Bosse's Computer and Internet Link?
#9
Senior Member
If you have a slightly relaxed attitude to your own safety it is possible to use a quill-type steerer tube extender, which might allow stuff to come together.
As long as you're aware that it is use outside the intended application.
As long as you're aware that it is use outside the intended application.
#10
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Portland, Or
Posts: 395
Bikes: | Surly Disc-Trucker| unknown city bike |M80 Raleigh |09 Trek 1.2|
Likes: 0
Liked 0 Times
in
0 Posts
Will pass on the extender. Have just started to look for a diffrent step through with 26" wheels.
Thanks
Tim
Thanks
Tim
#11
rebmeM roineS
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,218
Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Liked 350 Times
in
228 Posts
A Townie is not just a step through frame but is a crank forward type of step through frame. If you want to ride a crank forward bike, might be worth the trouble. If not, then a more conventional frame makes sense.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
Bacchetta Giro A20, RANS V-Rex, RANS Screamer