ISO and For Trade thread parts 2 and 3.
Banned.
ISO:
Suntour two-prong freewheel tool.
A decent set of cone wrenches.
I recently realized I have 4 sets of freehwheeling wheelsets and three Suntour GPX groupsets.
Since two of the wheelsets are like new, I wasn't worried about cone wrenches.
However, one set is unrideable until I repack the hubs, and I realized also that GPX calipers are very easily adjusted to center with a cone wrench and hex wrench.
So I'm in the market for some cone wrenches, as I gave away my last set.
Suntour two-prong freewheel tool.
A decent set of cone wrenches.
I recently realized I have 4 sets of freehwheeling wheelsets and three Suntour GPX groupsets.
Since two of the wheelsets are like new, I wasn't worried about cone wrenches.
However, one set is unrideable until I repack the hubs, and I realized also that GPX calipers are very easily adjusted to center with a cone wrench and hex wrench.
So I'm in the market for some cone wrenches, as I gave away my last set.
Junior Member
Join Date: Feb 2016
Posts: 6
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Last edited by LeifMichelsen; 03-14-16 at 04:43 AM.
Yes [MENTION=108582]RobbieTunes[/MENTION]! Whatever its actually called.
Last edited by jethin; 03-13-16 at 09:23 AM.
I have a generic SS crank [MENTION=96605]smontanaro[/MENTION]. I'd need a straight 170mm SR Apex / NR style left arm to replace it. Any make and condition above fair would be fine by me.
Last edited by jethin; 03-13-16 at 09:29 AM.
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
ISO:
-Clamp on DT shifters (for my Fuji)
-Seatpost 26.2 something SR/Sakae/Sugino etc
Have:
SR Pedals SP153 (one needs dustcap)
Sugino Mighty chainrings 52/44
SR stem short reach
-Clamp on DT shifters (for my Fuji)
-Seatpost 26.2 something SR/Sakae/Sugino etc
Have:
SR Pedals SP153 (one needs dustcap)
Sugino Mighty chainrings 52/44
SR stem short reach
Last edited by OldsCOOL; 03-13-16 at 10:42 AM.
Senior Member
ISO:
Suntour two-prong freewheel tool.
A decent set of cone wrenches.
I recently realized I have 4 sets of freehwheeling wheelsets and three Suntour GPX groupsets.
Since two of the wheelsets are like new, I wasn't worried about cone wrenches.
However, one set is unrideable until I repack the hubs, and I realized also that GPX calipers are very easily adjusted to center with a cone wrench and hex wrench.
So I'm in the market for some cone wrenches, as I gave away my last set.
Suntour two-prong freewheel tool.
A decent set of cone wrenches.
I recently realized I have 4 sets of freehwheeling wheelsets and three Suntour GPX groupsets.
Since two of the wheelsets are like new, I wasn't worried about cone wrenches.
However, one set is unrideable until I repack the hubs, and I realized also that GPX calipers are very easily adjusted to center with a cone wrench and hex wrench.
So I'm in the market for some cone wrenches, as I gave away my last set.
__________________
Semper fi
Semper fi
Junior Member
Join Date: Feb 2016
Posts: 6
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Aspiring curmudgeon
Join Date: Aug 2014
Location: Saint Louis
Posts: 2,486
Bikes: Guerciotti, Serotta, Gaulzetti
Likes: 0
Liked 26 Times
in
13 Posts
I have some Suntour blue line shifters. Nothing fancy, but functional.
__________________
"Party on comrades" -- Lenin, probably
"Party on comrades" -- Lenin, probably
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
ISO:
-Seatpost 26.2 something SR/Sakae/Sugino etc
Have:
SR Pedals SP153 (one needs dustcap)
Sugino Mighty chainrings 52/44
Campy chainring 49t
-Seatpost 26.2 something SR/Sakae/Sugino etc
Have:
SR Pedals SP153 (one needs dustcap)
Sugino Mighty chainrings 52/44
Campy chainring 49t
Senior Member
I have a Laprade 26.2 that is a bit scratched up but presentable. With a bit of work, could look pretty good.
__________________
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
Senior Member
Ok let me know? I cleaned it up and gave it a quick sanding and put a nice finish on it. Looks pretty good now.
__________________
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
My bikes: 1970`s Roberts - 1981 Miyata 912 - 1980`s Ocshner (Chrome) - 1987 Schwinn Circuit - 1987 Schwinn Prologue - 1992 Schwinn Crosspoint - 1999 Schwinn Circuit - 2014 Cannondale Super Six EVO
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,320
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Liked 601 Times
in
314 Posts
Junior Member
Join Date: Feb 2016
Posts: 6
Likes: 0
Liked 0 Times
in
0 Posts
Thanks a lot I believe plastering this thread with pics of my bikes is not really wanted, and I do not have the time at the moment to give each bike an own thread here or to load up all the photos here, but you can see more of them on my german forum account:
1983 Bianchi Specialissima --> Album Bianchi Specialissima 1983 - Rennrad-News.de
1983 Moser Model Profilo lightweight restoration --> Album Francesco Moser Modell Profil Columbus Air
1979 RiGi Bici Corta --> Album RiGi Bici Corta 1979 - Rennrad-News.de
1986 Somec Super Air 2001 Crono Strada --> Album Somec Super Air 2001 Crono Strada
1983 Bianchi Specialissima --> Album Bianchi Specialissima 1983 - Rennrad-News.de
1983 Moser Model Profilo lightweight restoration --> Album Francesco Moser Modell Profil Columbus Air
1979 RiGi Bici Corta --> Album RiGi Bici Corta 1979 - Rennrad-News.de
1986 Somec Super Air 2001 Crono Strada --> Album Somec Super Air 2001 Crono Strada
Junior Member
Join Date: Feb 2016
Posts: 6
Likes: 0
Liked 0 Times
in
0 Posts
Senior Member
Trying to down-size/finish projects. If a list of this length is considered a faux pas, I will revise.
ISO:
1x Shimano 600 tri-color crown race (26.4, non-sealed bearing)
2x Shimano 600 tri-color headset dust seals (sealed bearing or non-sealed, need both)
1x Shimano Dura-Ace downtube lever pair (guts not needed) (7400)
1x Shimano 8-speed freehub body that I can swap with Dura-ace uniglide body (I can dream)
1x Shimano Dura-Ace/600 quill stem cap
2x Velo Orange 'thumbie' bodies
Xx Shimano Bio-Pace rings 36t-46t in 110/130 (super-oblong version only)
1x Shimano Bio-Pace 26t
1x Shimano Bio-Pace 28t
...
Xx Weird colored brake/shifter housing, as long as it has a liner and not rusted. Will accept glitter housing from kids bikes
WTT:
(to the best of my recollection, all this stuff is in good/very good 'used' condition)
1x Shimano 600 6207 hubset (currently built into 'red label' bronze Araya 700c rims) (no skewers)
1x Shimano Dura-Ace 'sheriff star' track hub (no skewer)
1x Shimano 600 6207 front hub (no skewer)
1x Campagnolo front hub (small flange, don't know model, pictures can be provided) (No Skewer)
1x Campagnolo 'sheriff star' front hub (no skewer)
1x Campagnolo Athena crankset with road rings (beat up)
1x Campagnolo single-pivot brakes (missing a few bits, pictures can be provided)
3x Shimano sealed bottom brackets (107+110mm symmetric)
2x Soma reverse brake lever
1x PAUL cross-brake interrupter (missing c-clip)
Xx Front derailleurs (105, 600, Deore, Deore XT); (missing a few clamp bolts)
Xx random other bits, bobs, and bolts
Local to MA only:
3x mixte frames (bridgestone, miyata, centurion) 52cm TT
1x shogun 1500 touring frame 52cm TT
1x shogun 1000 racing frame ~50cm TT
ISO:
1x Shimano 600 tri-color crown race (26.4, non-sealed bearing)
2x Shimano 600 tri-color headset dust seals (sealed bearing or non-sealed, need both)
1x Shimano Dura-Ace downtube lever pair (guts not needed) (7400)
1x Shimano 8-speed freehub body that I can swap with Dura-ace uniglide body (I can dream)
1x Shimano Dura-Ace/600 quill stem cap
2x Velo Orange 'thumbie' bodies
Xx Shimano Bio-Pace rings 36t-46t in 110/130 (super-oblong version only)
1x Shimano Bio-Pace 26t
1x Shimano Bio-Pace 28t
...
Xx Weird colored brake/shifter housing, as long as it has a liner and not rusted. Will accept glitter housing from kids bikes
WTT:
(to the best of my recollection, all this stuff is in good/very good 'used' condition)
1x Shimano 600 6207 hubset (currently built into 'red label' bronze Araya 700c rims) (no skewers)
1x Shimano Dura-Ace 'sheriff star' track hub (no skewer)
1x Shimano 600 6207 front hub (no skewer)
1x Campagnolo front hub (small flange, don't know model, pictures can be provided) (No Skewer)
1x Campagnolo 'sheriff star' front hub (no skewer)
1x Campagnolo Athena crankset with road rings (beat up)
1x Campagnolo single-pivot brakes (missing a few bits, pictures can be provided)
3x Shimano sealed bottom brackets (107+110mm symmetric)
2x Soma reverse brake lever
1x PAUL cross-brake interrupter (missing c-clip)
Xx Front derailleurs (105, 600, Deore, Deore XT); (missing a few clamp bolts)
Xx random other bits, bobs, and bolts
Local to MA only:
3x mixte frames (bridgestone, miyata, centurion) 52cm TT
1x shogun 1500 touring frame 52cm TT
1x shogun 1000 racing frame ~50cm TT
Francophile
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,566
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 674 Times
in
331 Posts
I have for offer a pair of Patrick lace-up shoes with floating cleats, size 41 (although I suspect they are closer to 40s). They are still in good shape, nice and stiff, although they could use a polish.
All I ask in return is postage.
(Update: these have been claimed.)
All I ask in return is postage.
(Update: these have been claimed.)
Last edited by Aubergine; 03-18-16 at 10:06 AM.
Senior Member
Join Date: Nov 2008
Location: South Jersey
Posts: 1,959
Bikes: Too many Bicycles to list
Liked 138 Times
in
45 Posts
Still looking for these little Dia Compe Gran Compe lever parts or an orphan Gran Compe lever like the one pictured to finish my Peugeot build. The only thing left and seemingly the most difficult to find. Without having to buy a pair of them that is. Someone hopefully has just one kicking around complete and cheap hopefully. Even if it's trashed. I only need the pivot pin and return spring :^( Other things I'm after are hoods for Modolo Sporting brake levers and the quick release portion of a Modolo Corsa brake caliper.
Glenn
Junior Member
Join Date: Feb 2016
Posts: 6
Likes: 0
Liked 0 Times
in
0 Posts
ISO:
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set --> found
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Hey guys. I am looking for a list of things I need to finish my bikes. Hope you can help me out! Regards.
1983er Bianchi Specialissima:
- Everest freewheel removal tool
- Everest or Regina chain 6x
1979er RiGi Bici Corta:
- black headset (FT or OMAS or Stronglight or else)
- Cambio Rino Aero group (black) or
- Assos/ Mavic crank; Mavic SSC 860 + 851; Modolo shifter lever
- Modolo Professional o. Master Pro Titanium calipers black, also taking complete set --> found
1983 F. Moser Aero:
- OMAS rear quick squewer, silver
- pair of Nisi Pista Speciale 200g 28 hole 700c
- light braze on FD, such as Huret Jubilee, Suntour Superbe or else...
A big thanks to all in advance!
Also: Found a very decent pair of Clement Seta Extra Colle Main
Stop reading my posts!
EDIT: The only one I've found is clamp-on (endless band variety), though I swear I had a "braze-on" model but either it's deeply buried or I sold it and have forgotten.
Last edited by unworthy1; 03-20-16 at 10:49 AM.
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,919
Bikes: 82 Medici, 85 Ironman, 2011 Richard Sachs
Liked 2,236 Times
in
1,217 Posts
I have this Benelux rear changer. Says 4 or 5 speeds. i can't see and signs of use on the pully cage. Little ball bearings in the pully wheels. I only Simple Greened it and hung it on the work bench. Looks pretty cool.
Maybe these cogs go with it? They thread onto a carrier and one of the small ones is cracked.
ISO nice Simplex SLJ 6600 and LJ 522 for my '69 PX-10 that only needs one more coat of paint.
Maybe these cogs go with it? They thread onto a carrier and one of the small ones is cracked.
ISO nice Simplex SLJ 6600 and LJ 522 for my '69 PX-10 that only needs one more coat of paint.