miamijim

ISO top cap for Super Record 1 bolt seat post.

slowtostart

I have 2 Sturmey Archer "type" cables for modern (not pretty) 3 speed shifters. These are new and include housings. What useless item might be taking up space in your 3 speed inventory?
The bar is set very low.

noglider 

I need the type of road-type brake levers that have return springs in them, because dual-pivot brakes don't offer a lot of release force.

I have plenty of the spring-less type, and I have plenty of other goodies.

Thanks.

Steve Whitlatch 

I have these sitting in my bin. Nothing spectacular but in very good condition.

noglider 

Nice. Can you please email me? Thanks.

unworthy1

[MENTION=201707]Henry III[/MENTION], I have a fairly nice GS rear caliper but it's for recessed Allen bolt, HOWever I'm going thru all my stashes in prep for a swap meet in June and am pretty sure i have some '"for parts" GS calipers and perhaps other GS components, too that I may unearth...so PM me whether you are getting your list filled and/or what's still on it.

SkyDog75

ISO quill stem with 100 mm reach and quill length in the ballpark of 180 mm. Preferably 26.0 mm clamp. A Nitto Technomic Deluxe (not the longer Technomic) would be ideal.

francophile 

Ok, someone help fill my empty hole. eBay is killing me trying to get a replacement NR fixing/pivot bolt for less than 2x the cost of an entire RD. I need the one shown here on the right for a '72 groupset I'm cleaning up on a project. Part 166/A if it matters, and it doesn't need to be gorgeous, I can tolerate a little chew.

Anyone help a brother out? I have a gaggle of things to trade if necessary, just tell me what you're looking for.

smontanaro 

I recently acquired a Zeus Criterium rear derailleur with a useless-for-it Campy pivot bolt. I've not removed the bolt to see if it matches your application, but it can't be far off, if not spot on. I don't suppose you have the Zeus bolt I need? Maybe some NR seatpost saddle clamp bits?

cyclotoine

I have some parts for NR post, like maybe the uppers and possibly bolts but not the lowers, unless you are looking for the super narrow ones, I have those. Let me know, I'm not home till next weekend to look though.

francophile 

[MENTION=96605]smontanaro[/MENTION] you've requested two things I don't have, sadly. However, I'm open to a 3-way trade if I have something [MENTION=13607]cyclotoine[/MENTION] needs, assuming we can't find something to swap, wouldn't be the first triple-party trade I've don't through this specific thread. I really need to do a better job of tracking my extra bits...

sloar

Looking for a 68-SS-120 Nuovo Record spindle long enough for a triple. The one I have is 112mm and the inner chainring hits the frame. I can swap the one I have for a longer spindle, or something else. Thanks..

cyclotoine

[MENTION=96605]smontanaro[/MENTION], I would be into that if we can find something I need, there are always things.

Narhay

ISO:
One orphan Suntour bar end shifter. Alternatively I have the lever part but I would need the piece that sits in the handlebar.
High flange front Campagnolo Record hub with skewer. The rear has the D ring skewer so ideally it would match.

3speedslow

ISO: 27.0 seatpost. Japanese preferred, SR or others.

Have: other sized seat posts 26.2, 26.4, lots of 26.6, 26.8, 27.2

Thanks for the consideration!

3speedslow

I just sent that part off to another good home( paying it forward) for someone here. I will keep my eyes open for another at the shop.

mountaindave 

I have a mismatched set of Campy and Suntour bar ends. I would be happy to trade the Suntour for a Campy bar end. It would go nicely with the campy drivetrain it is destined for.

Narhay

Unfortunately I do not have an orphan Campagnolo bar end. I've just got the solo suntour and the other lever.

Narhay

Thanks. Let me know if you find something under a table.

mountaindave 

Crap in a hat! I just searched Ebay for campy levers and they are ridiculous expensive. I got mine for $10 at a co-op. Lower quality and higher price - I don't understand....

francophile 

looking for anything specific? I recently took on some Shimano barcons (7400 or 7500) I could probably get a chunk for but have no real interest in.

I really have a mish-mash of parts right now after the last few bikes I've restored and re-homed. The one thing I don't have a lot of is Campy.

francophile 

I think I may have you covered here. I have the remnants of the Trek 330 with the cracked RDO recently. Seat post measures a smidge over 27 (like 27.06 or 27.07, so I'm assuming it's 27 even).

Let me dig it up and I'll drop pics.

due ruote 

ISO a good quality threaded rigid unicrown fork that will fit a 90mm head tube. Must have eyelets. For a 1992 Stumpjumper Comp. If it's pink, that's many bonus points, but I am expecting to paint. Chrome would be OK too.

[edit] never mind; crawled through the bsmt of the lbs and found something.

francophile 

[MENTION=207730]3speedslow[/MENTION] will this do? If so drop me a PM, I got you covered, brother.

Delta DG-S Laprade alloy. ~120mm insertion up to flutes, 200mm including flutes. Digital caliper pegs it at 27.06 dia, which I guess you could sand mildly to shave off that six-hundredth of a mm.

cyclotoine

Have: Salsa Woodchippers, 42 and 46 cm models, 31.8 clamps

Want: Salsa Cowchipper, 46cm or possible 46 or 48 cm nitto noodle bars.