There Really is no use for a Tire Guage.
#1
Senior Member
Thread Starter
Join Date: Aug 2012
Posts: 275
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
There Really is no use for a Tire Guage.
I use my hand pump and get my tire to 110.
Then to double check I use my digital hand gauge.
The only problem is every time I use the gauge I lose pressure and have to throw some more air into the tire.
So.... is there really any purpose for the hand gauge.
Then to double check I use my digital hand gauge.
The only problem is every time I use the gauge I lose pressure and have to throw some more air into the tire.
So.... is there really any purpose for the hand gauge.
#4
Senior Member
Join Date: Jan 2015
Location: Long Island, NY
Posts: 866
Bikes: 2014 Specialized Secteur Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I was under the impression that Presta valves close up as soon as a change in pressure occurs (i.e. when gauge or pump is removed). The only air lost is in the hose or outside the valve.
If you gauge is losing that much air, you should get another gauge. It might be helpful to not unscrew the nut on the Presta valve that keeps the valve closed as much so that it will only open the valve less and only when the gauge is very close to seating on the valve.
If you gauge is losing that much air, you should get another gauge. It might be helpful to not unscrew the nut on the Presta valve that keeps the valve closed as much so that it will only open the valve less and only when the gauge is very close to seating on the valve.
#6
Non omnino gravis
#9
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,560
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1107 Post(s)
Liked 2,208 Times
in
1,486 Posts
A hand pump is for roadside emergencies and not regular use. Get a floor pump.
You will lose air using a gauge. It can't be helped. But the more you use it, the better you get in avoiding loss.
You will lose air using a gauge. It can't be helped. But the more you use it, the better you get in avoiding loss.
#11
Recusant Iconoclast
Is this a thing? Seriously?
Can you actually tell/feel the difference between 110 and 112 psi? (And assuming either gauge is accurate?) And for the fraction the gauge is inserted and released, how much pressure do you think is lost?
Unless of course you're Tom Brady and can't tell the difference regardless.
Can you actually tell/feel the difference between 110 and 112 psi? (And assuming either gauge is accurate?) And for the fraction the gauge is inserted and released, how much pressure do you think is lost?
Unless of course you're Tom Brady and can't tell the difference regardless.
#13
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,607
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3917 Post(s)
Liked 1,975 Times
in
1,410 Posts
Road Morph G also has a gauge.
__________________
Results matter
Results matter
#14
Senior Member
Join Date: Jul 2008
Location: Minas Ithil
Posts: 9,173
Mentioned: 66 Post(s)
Tagged: 0 Thread(s)
Quoted: 2432 Post(s)
Liked 641 Times
in
398 Posts
Pump it up to 110 or whatever and give it one squirt of air. Very simple. I'd like to know what hand pump the OP uses to get it to 110.
#15
Senior Member
Join Date: Aug 2014
Location: Columbia, SC
Posts: 2,977
Bikes: 2014 Cannondale Synapse Carbon 4 Rival; 2014 Cannondale Trail 7 29; 1972 Schwinn Suburban, 1996 Proflex 756, 1987(?) Peugeot, Dahon Speed P8; 1979 Raleigh Competition GS; 1995 Stumpjumper M2 FS, 1978 Raleigh Sports, Schwinn Prologue
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Who uses just a hand pump? Go get a floor pump with built in gauge. Problem solved, and life is a lot easier
#16
Senior Member
Join Date: Nov 2011
Location: South Carolina
Posts: 564
Bikes: 1976 Raleigh,2015 Bianchi Intenso, 2012 Specialized Secteur.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
I set the outlet pressure on my compressor to 100, and hammer the air in til it stops.
#18
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 110 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
ikr? No pump I have ever owned. But then I've never had Lezyne.
#19
Senior Member
Join Date: Jan 2015
Location: Madison, IN
Posts: 1,351
Bikes: 2015 Jamis Quest Comp
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 270 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Correct...no need at all... Squeeze the side of the tire, if it feels too soft, add air.
Also, I got by with just a frame pump for several years. It had a gauge, and got me up to over 90psi, which is plenty for 25mm tires and my 160 lb. Body. Never felt a need to go harder, and in fact never maxed out the pumps pressure.
Got a floor pump last Xmas....it's just faster is all...and I can use it on cars in an emergency.
Also, I got by with just a frame pump for several years. It had a gauge, and got me up to over 90psi, which is plenty for 25mm tires and my 160 lb. Body. Never felt a need to go harder, and in fact never maxed out the pumps pressure.
Got a floor pump last Xmas....it's just faster is all...and I can use it on cars in an emergency.
#20
Ride On!
Join Date: Apr 2016
Posts: 971
Bikes: Allez DSW SL Sprint | Fuji Cross
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 227 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Funny part is my floor pump with gauge cost less than either one of my frame pumps.
I could get my tires close without it, but it's nice to know that I inflate them to the exact same pressure each time before I go out.
I could get my tires close without it, but it's nice to know that I inflate them to the exact same pressure each time before I go out.
#21
Senior Member
I use the tire gauge in between pumping days, to see if I need to use the pump. If the tire gauge says 100, I know I'm good to go without getting the floor pump going.
#22
Senior Member
Join Date: Jan 2015
Location: Long Island, NY
Posts: 866
Bikes: 2014 Specialized Secteur Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 21 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
My Lezyne micro floor pump HPG can get up to 160 psi. On several occasions I have pumped up a flat for a club member to 110-120 with not much effort.
#23
Senior Member
Join Date: Feb 2014
Location: Cabot, Arkansas
Posts: 1,538
Bikes: Lynskey Twisted Helix Di2 Ti, 1987 Orbea steel single speed/fixie, Orbea Avant M30, Trek Fuel EX9.8 29, Trek Madone 5 series, Specialized Epic Carbon Comp 29er, Trek 7.1F
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
It's not Nascar it isn't that critical. Get it close and don't sweat it.
#24
Administrator
Join Date: Feb 2005
Location: Delaware shore
Posts: 13,560
Bikes: Cervelo C5, Guru Photon, Waterford, Specialized CX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1107 Post(s)
Liked 2,208 Times
in
1,486 Posts
#25
staring at the mountains
Join Date: Mar 2005
Location: Castle Pines, CO
Posts: 4,560
Bikes: Obed GVR, Fairdale Goodship, Salsa Timberjack 29
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 198 Times
in
112 Posts
I'm 185-190lbs and I run 25mm tires at 82ish psi. You might want to experiment with lower pressures --smoother ride. Smoother = faster.